SDS-05035 0.50mm Diameter 35mm Length Hooked End Steel Fiber

This kind of steel fiber has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times continuously) and the strongest anchoring force. Its products can be the largest in the steel fiber family and are widely used in road bridge expansion joints and large-scale water conservancy and hydropower reinforcement projects.

The Specification of SDS-05035 0.50mm Diameter 35mm Length Hooked End Steel Fiber

The Advantages of SDS-05035 0.50mm Diameter 30mm Length Hooked End Steel Fiber

Easier operation and less time-consuming;

High toughness and lower thickness;

Integrated, no pores, more efficient;

Less time used, and more economical;

Compared with traditional concrete, more economical and efficient.

USER'S GUIDANCE

Dosage: depend on the application and minimum dosage is 20kg/㎥-70kg/㎥

Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it in a mixing table, dry and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.

Put the uniformly mixed fiber concrete into the conveyor and transport.

Concrete pouring and laying should be compacted.

The Safety & Packaging of SDS-05035 0.50mm Diameter 35mm Length Hooked End Steel Fiber

Packaging: 20kg or 25kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet, 24tons per 20'container.

And the pallets should be waterproof, don't stack pallets on top of each other.

Gloves and eye protection should be used when adding the steel fibers.

SDS is one of the top steel fiber supplier, we provide fibers used in concrete, 0.5 mm steel wire, steel fibers for concrete reinforcement and etc. Want to know more? Please contact us.