FERROUS - 615 Anuncios

Martes 23 mayo 2023

Cantidad : 1000 sets/ - Precio : USD 500~50000

If you need hot forging for large workpieces, smelting for ferrous or non-ferrous metals or deep heat treatment, the MFS series of intermediate frequency induction heating equipment is your most correct choice. Advantages of medium frequency induction heating equipment The induction...

Martes 23 mayo 2023

Cantidad : 1000 sets/ - Precio : USD 500~50000

CX2030C 50-120KHZ high-frequency MOSFET type induction heater holds the output power of 15KW/30KVA. It is suitable for soldering, welding and quenching heating of small metal parts. Produced by a famous brand, MOSFET of our high frequency induction heater is quality reliable. With...

Martes 23 mayo 2023

Cantidad : 1000 sets/ - Precio : USD 500~50000

CX2020A high-frequency induction forging machine is designed to work at the frequency range of 50~120KHz and its output power range is 10KW. It is often used for induction brazing, welding, small parts forging heating and heat treatment. The core component of this high power induction...

Jueves 11 mayo 2023

Elephant Fluid Power: Provide Nachi series hydraulic gear pump seal kit, original OEM pump parts and auxiliary factory pump parts. Elephant Fluid Power: guarantee quality and appropriate prices, and perfect after-sales service. Details of Nachi Series Pump Seal Kit NACHI series 1 model...

Sábado 06 mayo 2023

Permanent magnets, which do not require electrical power, are used in magnetic sorting machine to separate ferrous metal from the garbage. To separate steel wires, nails, and gas cans that are traveling on the magnetic separator conveyor, the conveyor separator rotates around a substantial...

Sábado 06 mayo 2023

Magnetic eddy current separator machine is also known as non-ferrous separators, which uses the induction principle (eddy current) of a high-frequency magnetic field to separate non-ferrous metals. High-capacity permanent magnet drum traveling at a high speed inside an eddy current...

Sábado 06 mayo 2023

Precio : $700-1100/MT

Green Vs Black Silicon Carbide Silicon carbide (SiC) is made of quartz sand, petroleum coke (or coal coke), wood chips, and other raw materials by a high-temperature smelting resistance furnace. In the contemporary C, N, B and other non-oxide high-tech refractory materials, silicon...

Sábado 29 abril 2023

Cantidad : 30 sets - Precio : USD10,000-USD100,000

The pipe roll forming machine is a high-quality, high-efficiency rounding device for winding carbon steel, stainless steel and non-ferrous metal profiles (round tubes, angle steels, grooved steel, , etc.) into rings and flanges. The tube roll forming machine is one of the types of...

Viernes 28 abril 2023

resin bond grinding wheels Resin bonded grinding wheels are generally divided into resin bond diamond grinding wheel and resin bond CBN grinding wheels according to abrasives. Henan E-Grind Abrasives Co., Ltd's resin diamond grinding wheel have long service life, excellent self-sharpening...

Viernes 28 abril 2023

The main product is ball cage type, designed and developed BJ, BHJ, BJS, BC, DOJ five categories, compared to NTN, the model specification is more complete, for different fields, use conditions, almost all can choose the appropriate coupling. In the field of vehicles, unlike NTN's...

Viernes 28 abril 2023

Constant Velocity Joint is the advantage product of BOYA, which is very welcomed by design institutes. Because of the characteristics of high accuracy, constant speed, stable movement, long working life and so on, constant velocity joint is accepted by more and more customers. Both...

Sábado 22 abril 2023

Cantidad : 1-100,000 - Precio : $1-$10

This is the Copper CNC Lathing Parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 56mm*45mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Large Part Machining Services 1. Parts up to 180″ x 90″ (CNC Controlled) 2...

Sábado 15 abril 2023

Precio : USD0.025 - USD1.05

E-Grind is a professional PCD wire drawing dies supplier and manufacturer, we provide two series of Diamond Wire Drawing Die Blanks: CDB Series and TDBY Series. 5 grades of grain size available: 3 microns, 5 microns, 10 microns, 25 microns and 50 microns. What is PCD Wire Drawing Dies Used for...

Sábado 15 abril 2023

Precio : USD0.025 - USD1.05

As one of the most professional abrasive powder suppliers in China, E-Grind offers a full range of superabrasives: Synthetic diamond, Cubid Boron Nitrid and related Solid products like CVD, TSP, PDC, PCD&PCBN, Diamond Wire-Draing Die blanks, for Drilling, Sawing, Cutting, Grinding...

Sábado 15 abril 2023

Precio : USD0.025 - USD1.05

E-Grind supplies the whole range of PCD blanks and PCD PCDN for cutting tool purpose. The largest Diameter of PCD blanks and PCDN blanks available can be 55mm. Our PCD blanks and PCDN blanks provide high wearing resistance ability and high finishing surface. Application of PCD Blanks...

Martes 11 abril 2023

Precio : 0.1USD-60USD

KEYING Wool Felt Points' raw materials are mainly imported from Australia wool, mainly used in mechanical processing, hardware, casting, auto parts, aviation, high-speed cars, ships and other high precision processing manufacturing industries. Especially suitable for non-ferrous metal...

Martes 11 abril 2023

Precio : 0.1USD-60USD

Vertical Type Wool Disc is specially designed for mirror finishing & polishing requirements. It's different like normal flap discs and the disc's density can be 2.0g/cm3 to 8.0g/cm3 which provide cooler & flexible polishing performance. Felt polishing flap disc can be used...

Martes 11 abril 2023

Precio : 0.1USD-60USD

Felt Flap Discs 4 inch is specially designed for mirror finishing & polishing requirements. It's different like normal flap discs and the disc's density can be 2.0g/cm3 to 8.0g/cm3 which provide cooler & flexible polishing performance. Felt polishing discs can be used to eliminate...

Martes 11 abril 2023

Precio : 0.1USD-60USD

Felt flap disc is specially designed for mirror finishing & polishing requirements. It's different like normal flap discs and the disc's density can be 2.0g/cm3 to 8.0g/cm3 which provide cooler & flexible polishing performance. The felt flap disc can be used to eliminate scratches...

Martes 11 abril 2023

Precio : 0.1USD-60USD

Fan Type Wool Disc is specially designed for mirror finishing & polishing requirements. It's different like normal flap discs and the disc's density can be 2.0g/cm3 to 8.0g/cm3 which provide cooler & flexible polishing performance. Felt polishing flap disc can be used to...

Martes 11 abril 2023

Precio : 0.1USD-60USD

Metal Backing Wool Disc is specially designed for mirror finishing & polishing requirements. It's different like normal flap discs and the disc's density can be 2.0g/cm3 to 8.0g/cm3 which provide cooler & flexible polishing performance. Felt polishing discs can be used to...

Martes 11 abril 2023

Precio : 0.1USD-60USD

felt disc flat type Flat type steel wool polish chrome is specially designed for mirror finishing & polishing requirements. It's different like normal flap discs and the disc's density can be 2.0g/cm3 to 8.0g/cm3 which provide cooler & flexible polishing performance. Felt...

Sábado 08 abril 2023

High precision die casting involves 3 key elements: the die casting machine, the mold, and the alloy materials, and the die casting could be described as the process of combining pressure, speed, and time to achieve an ideal cast metal part. The pressure applied during the casting...

Viernes 07 abril 2023

Cantidad : Quantities

Sibai made many kinds of customized nuts. We customize nuts according to drawing requirements. We produce the thread according to various standard Sibai Custom made nuts Features Sibai made many kinds of customized nuts. Nut is a necessary part of all manufacturing machinery. There...

Miércoles 29 marzo 2023

BOYA Tension leveler is the core equipment to leveling and shaping strip in cold rolling mill various process lines such as pickling line/pickling and tandem mill, Continue annealing line, galvanizing line, tinning line, color coating line, finishing lines etc. By stretching, bending...

Miércoles 29 marzo 2023

BOYA multi-roll leveler is the core equipment of finishing process in metallurgical hot and cold rolling mill. By repeatedly bending and convex straightening of the strip, the strip can be straightened with high strength and precision; Widely used in high strength steel, precision steel strip...

Miércoles 29 marzo 2023

Non standard bearings are bearings that do not conform to the outline dimensions stipulated by the national standards, that is, the outline dimensions are different from all bearings stipulated by the national standards. Non-standard bearings have low versatility and are mostly used...

Sábado 25 marzo 2023

Cantidad : 12000 tons - Precio : 2.5-6.8

Epoxy tie coat paint has very good adhesion to stainless steel and non-ferrous metal substrates. It has excellent flexibility and shielding properties. It has very low water permeability and can be cured even at -10°C. It is mainly used at ship bottoms as a tie coat for anti-fouling paint...

Sábado 25 marzo 2023

Cantidad : 12000 tons - Precio : 2.5-6.8

The epoxy shop primer paint is composed of iron oxide red, epoxy resin, anti-rust pigment, filler, solvent, etc. The paint is fast-drying. After 5-10 minutes on the steel pretreatment line, the steel can be hoisted and stacked, and various primers and topcoats can be sprayed immediately...

Miércoles 15 marzo 2023

Cantidad : 10t - Precio : 1100-1300/MT

Zinc chloride 98%min industrial grade/battery grade Molecular Formula : Zncl2 Molecular Weight : 136.29 Solidifying Proportion: 2.91 Produced and tested according to the national standard GB1625-79 and department standard HG/T2323-2004.The content of Zinc Chloride ,as the main index...