FERROUS - 615 Anuncios

Martes 14 marzo 2023

Precio : 25usd-100usd

Non-ferrous metals are divided into basic metals and minor metals. Minor metals are called minor metals because they are relatively small units. Metal Minor types are: Magnesium ingot antimony ingot; Electrolytic manganese. Cadmium ingots and bars; Electrolytic cobalt; Pure bismuth...

Sábado 04 marzo 2023

Cantidad : 10000 - Precio : 4-10000USD

Wholesale Shaped Cutter PDC Bit (PDC)Polycrystalline diamond composite is a composite material in which thin layers of polycrystalline diamond are bonded to a cemented carbide substrate. Polycrystalline diamond composites combine the high wear resistance of polycrystalline diamond...

Sábado 04 marzo 2023

Around the world and across industries, sealing products are critical to safety and efficiency. Sealing manufacturers in the market generally lack effective solutions for durability and sustainability, But Longsheng did this by leading the transition toward safe, sustainable, high-performance...

Jueves 02 marzo 2023

Belt Buckle Belt buckle is also called belt head or belt buckle head. Belt buckle is a hardware accessory at the front end of the belt. Used to decorate and fix the whole belt. Belt Buckle Specifications Product key words: Stainless steel pen holder trim materials: stainless steel...

Jueves 23 febrero 2023

What Is Cubic Boron Nitride? Boron nitride is a crystal composed of a nitrogen atom and a boron atom. The chemical composition is 43.6% boron and 56.4% nitrogen with four different variants: hexagonal boron nitride (HBN), rhombohedral boron nitride (RBN), cubic boron nitride abrasive...

Sábado 18 febrero 2023

JKZ's induction heating melting furnace can firm the current directly on the graphite crucible or directly on the metal, thereby greatly reducing the heat loss on the furnace itself. With the characteristics of 100% success startup, 100% duty cycle, and power point reach up to 0...

Sábado 18 febrero 2023

The process of steel smelting to finishing are all completed in a high-temperature heating environment. The induction melting of iron, the composition of ingredients, and roll forming are all accompanied by heating. The process of recycling, smelting and purifying waste steel is also...

Viernes 10 febrero 2023

Precio : 0.01-1000

Featured with a built-in strong permanent magnet circuit, TITIANSUHE lifting clamps suppliers permanent lifter magnet is designed to handle steel plates, , and rods simply and quickly without the help of lifting slings or hoisting. They do not require the use of electricity and are...

Miércoles 08 febrero 2023

Type 29 allows for more aggressive cutting action, making this option ideal for stock removal and faster cutting on flats or contours. The Felt Flap Disc is designed for the final stage polishing on the item surface for a high gloss or mirror finish. This Felt Polishing Flap Disc...

Miércoles 08 febrero 2023

It is a derivative of white corundum. Its appearance is rosy, its hardness is similar to that of white corundum, its toughness is slightly higher than that of white corundum, and its strength is high, its grinding performance is good, and its grinding precision is high. The abrasive...

Miércoles 08 febrero 2023

Table of Cartridge Rolls with Shank 25/32inch Cartridge Rolls with Shank 25/32inch Specification: Diameter: 25/32 inch=20mm Max. RPM: 12000 RPM Raw Materials: Aluminum Oxide(AO), Zirconia(Z) Grit Size: 40#/60#/80#/100#/120#/150#/180#/240#/320 #/400#/600# Shank Diameter: 3mm、6mm (Other...)

Domingo 29 enero 2023

Constant velocity universal joint is the advantage product of BOYA, which is very welcomed by design institutes. Because of the characteristics of high accuracy, constant speed, stable movement, long working life and so on, constant velocity joint is accepted by more and more customers...

Lunes 16 enero 2023

Graphite Powder Wholesale Graphite powder is a kind of mineral powder, mainly composed of carbon, soft, hardness of 1 ~ 2. Under the condition of isolated oxygen, the melting point is above 3000 ℃, which is one of the most temperature-resistant minerals. At room temperature, the...

Jueves 12 enero 2023

Cantidad : 100000 pie

Elephant fluid power provides original hydraulic components for machine building and is compatible and interchangeable with Rexroth, Danfoss, Komatsu, Kawasaki and other brands. We cooperate with the best non-ferrous metal suppliers in China and have more than 20 production workshops...

Miércoles 04 enero 2023

RJ45 Connector Cover RJ45 is a kind of information socket connector in wiring system. The connector is composed of plug (connector, crystal head) and socket (module). The plug has 8 grooves and 8 contacts. RJ is short for registered jack. JLY proviedes many types of rj45 connector protector...

Viernes 30 diciembre 2022

How to Identify Iron Ore Iron ores are rocks and minerals from which metallic iron can be economically extracted. The ores are usually rich in iron oxides and vary in color from dark grey, bright yellow, or deep purple to rusty red. It is an important raw material for iron and steel...

Sábado 17 diciembre 2022

Cantidad : 1000000pcs - Precio : 0.1USD-60USD

It is a derivative of brown corundum, and its appearance is black. It is characterized by low alumina content and a certain amount of iron oxide (about 10%), so it has low hardness but good toughness. It is mostly used for free grinding, such as grinding or rough grinding before electroplating...

Sábado 17 diciembre 2022

Cantidad : 1000000pcs - Precio : 0.1USD-60USD

Aluminum oxide is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut rate...

Sábado 17 diciembre 2022

Cantidad : 1000000pcs - Precio : 0.1USD-60USD

Aluminum oxide is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut-rate...

Sábado 17 diciembre 2022

Cantidad : 1000000pcs - Precio : 0.1USD-60USD

Aluminum oxide is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut rate...

Sábado 10 diciembre 2022

Cantidad : 1-100,000 - Precio : $1-$10

CNC Machining Lists DF has been providing CNC machining parts, featuring 4 Axis CNC machining, 5 Axis CNC machining, CNC milling parts, and lathing parts. They are available in communication, furniture, electronic non-standard isolation, microwave and non-ferrous construction equipment...

Jueves 17 noviembre 2022

Navrekha Steel was incorporated in the Year 2000. We specialize in the manufacturing & exporting of ferrous and non ferrous metal products like sheets & plates, & tubes, pipe fittings, flanges, bars & rods, fasteners, angles & channels, valves, etc. in various...

Miércoles 16 noviembre 2022

Victor Steel Corporation is innovative and fresh approach to the supply of the industrial ferrous and non ferrous products with 100% focus on exports only with a comprehensive range of Seamless & Welded Pipe Fittings in Stainless Steel, Carbon Steel and Alloy Steel along with...

Sábado 12 noviembre 2022

Graphite particle mainly come from the debris generated during the machining of graphite electrodes and the waste products generated by the graphite chemical process, so as to have some waste stone ink blocks. Because graphite chips have the characteristics of conductivity, heat conduction...

Sábado 12 noviembre 2022

Isostatic pressing graphite is a new product developed in the world in recent 50 years, which is closely related to today's high technology. Isostatic press graphite has the properties of high-temperature resistance, corrosion resistance, high strength, good conductivity, and thermal...

Jueves 10 noviembre 2022

Precio : 100USD

Casting is one of the basic processes of modern equipment manufacturing. The casting process can be divided into three basic steps, namely casting metal preparation, mold preparation, and sand casting and die casting processing. Casting metal refers to the metal material used for...

Martes 08 noviembre 2022

Precio : By product

Diversified products, complete specifications, reliable functions, and easy installation, suitable for a wide range of track running environments. Widely used in steel, non-ferrous, lifting, transportation, mining, textile, and other fields. Application of Bearing Roller Etc Product...

Miércoles 02 noviembre 2022

What Are Flexible Magnets Made Of? Flexible magnets (also called rubber magnets, soft magnets, bendable magnets, bendy magnets) are made of strontium ferrite powder compounded with plastics or rubbers (NBB or CPE). The main 3 grades of flexible ferrite magnets are Isotropic, semi-anisotropic...

Miércoles 02 noviembre 2022

A ferrous sheet (also called a flexible ferrous sheet) is made of iron/steel powder compounded with plastics or rubbers (NBB or CPE). The ferrous sheet is not a magnet itself but used to form a magnetic receptive face, it can be treated as a metal base to receive flexible magnetic...

Miércoles 02 noviembre 2022

round magnet factory high quality magnet round door magnets small magnets for sale and big magnets for sale yard magnet Risheng magnets are widely used in various areas: travel magnets for tourism; waterproof/underwater magnets for wilderness; whiteboard magnets for education; wooden/yard...