APPLICATION - 33259 Anuncios

Sábado 04 abril 2020

Cantidad : 1pc - Precio : 100$

Utilisation de la technologie GPS, sans fonctionnement manuel, partage de l'intensité du conducteur, fonctionnement sûr Peut stocker plusieurs lignes de voix, dans la direction supérieure/inférieure, peut stocker plus d'une station dans chaque direction pour faciliter l'exercice d'un...

Sábado 04 abril 2020

Cantidad : 1pc - Precio : 105$

Écran couleur haute définition TFT 2.4 pouces. Logiciel d'application professionnel, permettent aux clients d'éditer l'audio sur PC facilement. Définissez une démo sur l'appareil, copiez simplement des fichiers sur d'autres appareils. Copier des fichiers via une carte USB/SD Le Site...

Sábado 04 abril 2020

Cantidad : 500000tons - Precio : $5-$200000

The suck rod pumps can be sunk into wells in sequence as follows: barrel is run down to the setting depth on the tubing and then plunger with the standing valve on the rod string. For tubing of same diameter, tubing pumps are always of larger capacity than insert pumps. The tubing...

Sábado 04 abril 2020

Cantidad : 500000tons - Precio : $5-$200000

Non-rotating stabilizer(rubber sleeve stabilizer) is able to avoid blade wear and wall damage during. The non-rotating stabilizer consists of mandrel. Copper washer, rubber sleeve, spacer sleeve and self-locking lower sub. During drilling, the non-rotating stabilizer transfers the...

Sábado 04 abril 2020

Cantidad : 500000tons - Precio : $5-$200000

Mud pump parts are used on drilling rigs for the circulation of mud. These reciprocating pumps are suited for the process of drilling oil wells. We, at Saigao offer a wide selection of remanufactured, used and new drilling equipment for domestic and international drilling companies...

Sábado 04 abril 2020

Cantidad : 500000tons - Precio : $5-$200000

BW1200/7 slurry pump is horizontal double cylinder reciprocating double action piston pump. The power has electric driving and diesel driving. It also can use hydraulic motor to drive. Customer can choose before ordering. It is applicable for 1500 meters water well drilling, core...

Martes 31 marzo 2020

SPE technology is a physical extraction process including liquid phase and solid phase based on the theory of liquid-solid chromatography, which uses selective adsorption, selective elution to enrich, separate and purify the sample. In daily application, SPE cartridge can also be...

Martes 31 marzo 2020

Cantidad : 10MT - Precio : USD1450/MT

1485/5000 Antioxidante de caucho TMQ (RD) Nombre químico Polímero de 2,2,4-trimetil-1,2-dihidroquinolina Fórmula molecular (C12H15N) n CAS No. 26780-96-1 Especificaciones GB8826-88 Articulo Especificaciones Alto grado 1er grado Apariencia Ámbar a marrón granular temperatura de ablandamiento...

Martes 31 marzo 2020

Cantidad : 10MT - Precio : USD2450/MT

Acelerador de goma DPG (D) Nombre químico Dephenyl Guanidine (D) Fórmula molecular C13H13N3 Peso Molecular 211 CAS No. 102-06-7 Especificaciones HG / T 2342-2010 Articulo Especificaciones 1er grado Apariencia Polvo blanco o gris blanco o granular Punto de fusión inicial (℃) Mín. 145...

Martes 31 marzo 2020

Cantidad : 10mt - Precio : usd1520/mt

Acelerador de goma TMTD (TT) Nombre químico disulfuro de tetrametil tiuram Fórmula molecular C6H12N2S4 Peso Molecular 240.41 CAS No 137-26-8 Especificaciones Q / KES018-2007 Articulo Especificaciones 1er grado Apariencia Polvo blanco o amarillo claro Punto de fusión inicial (℃) Mín...

Martes 31 marzo 2020

Cantidad : 10MT - Precio : USD2560/MT

1004/5000 Acelerador de goma MBTS (DM) Nombre químico 2, 2-Dibenzothiazole Disulfide (MBTS) Fórmula molecular C14H8N2S4 Peso Molecular 332.5 CAS No. 120-78-5 Especificaciones GB / T 11408-2013 Articulo Especificaciones Alto grado Apariencia Polvo blanco o amarillo claro o granular...

Martes 31 marzo 2020

Cantidad : 10MT - Precio : USD2450/MT

Acelerador de goma CBS (CZ) Nombre químico N-ciclohexil-2-benzotiazol sulfulfamida Fórmula molecular C13H16N2S2 Peso Molecular 264.4 CAS No. 95-33-0 Especificaciones HG / T 2096-2006 Articulo Especificaciones Alto grado Apariencia Polvo grisáceo o amarillo claro o granular Punto de...

Martes 31 marzo 2020

Cantidad : 10000 Piec - Precio : 150-10000 USD

Longer Working Life Hybrid Drill Bits Improve Drilling Effeciency Overview of Hybrid Drill Bit Hybrid drills bits are compounded by the PDC fixed cutting and the roller free cutting structure. The teeth on the cone crush the rock by impact crushing, forming broken pits at the bottom of the well...

Martes 31 marzo 2020

Cantidad : 10000 Piec - Precio : 150-10000 USD

Three Blade Wings Drag Rock Drill Bit For soft formations Overview of Drag Bit Drag bit drilling is manufactured from forged high-quality alloy steel and hard alloy, plus state of art welding technology and multiple precision heat treatment to provide the highest rate and longest...

Martes 31 marzo 2020

Cantidad : 10000 Piec - Precio : 150-10000 USD

Bi-center bit for Mining Machinery and abrasive formation Overview of Bi-center Bit This type of Bi-center bit mainly used for medium to medium-hard compressive and abrasive formation, it has medium and high-density parabolic crown and heavy cutters density for the bit has good impact...

Martes 31 marzo 2020

Cantidad : 10000 Piec - Precio : 150-10000 USD

Single Cone Rock Roller Drill Bit for core barrel pilot bit Overview of Roller Bit GREAT Drill Bits have customized manufacture several types of roller bit. It is including 90 ° U shaped Drill Bit, 120 ° U-shaped Roller Bit and Starry Sky Roller Bit. The 90 ° U-shaped Roller Bit...

Lunes 30 marzo 2020

Filter cartridge is a useful tool that contains filter media to capture and retain particles infiltration system. We can find filters cartridge not only in various lengths and diameters, but being made of different construction materials as well. As the flow is from outside to inside...

Jueves 26 marzo 2020

Now, the sample vial has formed a considerable industrial scale, and has been concerned by the instrument industry and academia. At the same time, its application has covered many key industries and fields such as food safety, environmental monitoring, quality inspection, commodity inspection...

Viernes 20 marzo 2020

When we buy industrial magnets, we will encounter various selection problems. This article will introduce the related introduction of industrial magnets. Industrial magnets are high-strength magnets, and some of their properties make them ideal for industrial applications. Increasingly...

Viernes 20 marzo 2020

Permanent magnetic materials, also known as hard magnetic materials, are materials that still have magnetism after the magnetization field is removed. Soft magnetic materials have strong magnetic induction strength when the magnetization field exists, and lose magnetism when the magnetization...

Viernes 20 marzo 2020

Sintered neodymium magnet is the strongest magnetic material commercially available today. It is largely made of alloy of neodymium, iron and boron, and the chemical formula is Nd2Fe14B. Sintered NdFeB neodymium magnet exhibits high magnetic energy product in small size with high coercive forces...

Viernes 20 marzo 2020

This powerful neodymium disc magnet measures 1/2" in diameter, 5/8" in thickness, with the pull force of 15.05 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Viernes 20 marzo 2020

The 1 inch magnets measure 3/4" in diameter, 1/8" in thickness, with the pull force of 11.7 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications of the small circle...

Viernes 20 marzo 2020

This powerful neodymium arc magnet measures OD1.5" xID1.25" x0.75" Lx90 Degree. The 4 pieces of this arc magnets can form a circle with OD=1.5" , ID=1.25" and height =0.75" with working temperature of 302 degree Fahrenheit or 150 degree celsius. It is made from an alloy of neodymium...

Viernes 20 marzo 2020

This powerful neodymium disc magnet measures 3/4" in diameter, 1/8" in thickness, with the pull force of 9.76 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Viernes 20 marzo 2020

This powerful neodymium disc magnet measures 1" in diameter, 1/8" in thickness, with the pull force of 12.6 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Viernes 20 marzo 2020

We have cube magnets for sale! This powerful neodymium block magnet measures 3/4" in length, 1/4" in width, and 1/4" in thickness, with the pull force of 10.51 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for...

Viernes 20 marzo 2020

We have industrial magnets for sale! This powerful neodymium disc magnet measures 1/2" in diameter, 1/16" in thickness, with the pull force of 3.1lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion...

Viernes 20 marzo 2020

We have magnetic materials for sale! Magnetic materials can produce magnetic fields, which generate forces attracting or repelling ferromagnetic materials and other magnets. Magnetic materials can be divided into soft and hard magnets. Soft magnets are those materials easy to magnetize...

Viernes 20 marzo 2020

Mounting magnets are comprised of powerful permanent magnets set inside steel cups or channels with countersunk holes or threaded features for holding applications. The steel structure redirects the magnetic field from the back-side of the magnet, making it much more stronger in terms...