PERFORMANCE - 17873 Anuncios

Miércoles 20 marzo 2024

[Main composition] High-molecular polymer [General properties] Appearance: colorless and transparent liquid Ionicity: nonionic Solubility: soluble in water Compatibility: can use with cationic and non-ionic additives in one bath [Product features] The meaning of stiffening agents...

Miércoles 20 marzo 2024

Original wet rubbing fastness improving agent is poor deep dyeing for direct, reactive, indigo blue and sulfur dyestuffs, especially for dark black, bright red and turquoise blue whose wet rubbing fastness is below Grade 1, while fabric wet rubbing fastness exported to Europe and...

Miércoles 20 marzo 2024

Weighting Agent ZL [Main composition] Weighting finish for various fabrics. [General properties] Appearance: colourless transparent liquid Solubility: easily soluble in water Stability: stable to hard water Compatibility: test before use with nonionic auxiliaries Solid content: 60%...

Miércoles 20 marzo 2024

[Brief information] In high temperature and high pressure conditions, stripping agent HD is to prompt the fabric dyes from high concentration to low concentration or solution to transfer, suitable for polyester dyeing repair color, leveling and stripping. [Main composition] Mixtures...

Miércoles 20 marzo 2024

[Main composition] High-molecular polymer [General properties] Appearance: colorless and transparent liquid Ionicity: nonionic Solubility: soluble in water Compatibility: can use with cationic and non-ionic additives in one bath [Product features] The meaning of stiffening agents...

Miércoles 20 marzo 2024

RTV Silicone Rubber Silicone rubber is a straight chain of high molecular weight polysiloxane, molecular weight is generally more than 150,000, its structure is similar to silicone oil. RTV-2 adhesive has heat, cold, weather, arc resistance, and electrical insulation properties. It...

Miércoles 20 marzo 2024

Name: Fumed silica Appearance: Fluffy white powder. Technical Data of Fumed Silica Item Indexes The nitrogen adsorption specific surface area/（m2/g） Typical values±30 Loss on ignition/% ≤ 2.5 Silica content/% ≥ 99.8 Suspension PH 3.7~4.5 Al2O3 content/（mg/kg） ≤ 400 TiO2...

Miércoles 20 marzo 2024

This product is a colorless transparent liquid, inflammable, explosive. Dialkyl dichlorosilane is the raw material of silicone products, the reaction generated under the influence of water HCL, avoid sharp, contact heat, fire, and static electric spark. Technical Data of Dimethyl...

Miércoles 20 marzo 2024

Equivalent HYDAC filter element is an indispensable part of the pipeline series for conveying the medium. The filter element is usually installed in the inlet filter of the hydraulic system to filter out metal particles, polluting impurities, etc. in the fluid medium, which can protect...

Miércoles 20 marzo 2024

Precio : (3000-20000) USD\Tai

Fdata's logistics robots are named models starting with A702, overturning the traditional logistics handling mode and opening up an era of high performance in industrial logistics, with open interfaces that can be easily customized with different top modules to match multiple applications...

Miércoles 20 marzo 2024

Precio : (3000-20000) USD\Tai

DIY Customers can customize and develop various functions for their mobile robot platform kit. SLAM Our heavy-duty robot platform supports LiDAR SLAM and Visual SLAM, quick positioning and mapping. Obstacles Avoidance With intelligent 3D sensors, the robot mobile platform can avoid...

Miércoles 20 marzo 2024

Precio : (3000-20000) USD\Tai

DIY Customers can customize and develop various functions for their mobile robot platform kit. SLAM Our heavy-duty wheeled robot platform supports LiDAR SLAM and Visual SLAM, quick positioning and mapping. Obstacles Avoidance With intelligent 3D sensors, the robot mobile platform...

Miércoles 20 marzo 2024

Precio : (3000-20000) USD\Tai

Fdata robot has been an OEM & ODM mobile service robot and robot lawn mower manufacturer since 1995. We've experienced over 100 successful projects worldwide. We provide intelligent service robotic and robot lawn mower solutions from design, development, manufacture, and shipment...

Martes 19 marzo 2024

Anti-static Masterbatches are used to decrease the surface resistivity, which increases conductivity, in order to mitigate the static charge generated on the surface. Applied to different products have different performance. It mitigates the static charge generated on the surface...

Martes 19 marzo 2024

Anti block Masterbatch is used to enhance the surface properties of plastic film. They increase friction and resistance without affecting heat sealing and printing performance. Additionally, "0 VOC" Antiblock Masterbatches are available, which have zero volatile organic compounds...

Martes 19 marzo 2024

HONYE MASTERBATCH USES Choose Honye not only means choose a supplier, but also an assurance for business! Our solutions can be tailored to meet the specific needs of each application. Typically, masterbatches are widely used in automotive, healthcare, agriculture, packaging and etc...

Martes 19 marzo 2024

The main body of the operating table is made of 304 stainless steel and the bed board is made of phenolic laminated cardboard, which has the characteristics of uniform density and good X-ray transmittance. The Clinic Surgical Operation Table for Dogs is a specialized medical device...

Martes 19 marzo 2024

High precision temperature control, solid material, rugged and durable, smooth lifting, simple operation, temperature safety protection, simple buckle, easy to clean the water tank. The main body of the operating table is made of 304 stainless steel, which is convenient and practical...

Martes 19 marzo 2024

Precio : 4-10000USD

Under the effect of the WOB and the twist of the drill string, the teeth of the tci tricone drill bits are crushed and eaten into the rock, and at the same time there is a corresponding sliding to shear the rock. When it rolls at the bottom of the well, the teeth on it will impact...

Martes 19 marzo 2024

Precio : 4-10000USD

The teeth are processed by milling, and the teeth are all wedge tooth. Using floating bearing structure. Using high -density metal sealing. Steel ball lock the tooth wheel to adapt to high speed New wear -resistant materials for steel drilling teeth,increased the drill head cutting...

Martes 19 marzo 2024

Precio : 4-10000USD

The entire bit body of the PDC steel bit is made of medium carbon steel and machined using a fabrication process. The bit crown is treated with a surface hardening process (sprayed tungsten carbide wear layer, carburized) to enhance erosion resistance. Enter Top Tools, a leading name...

Martes 19 marzo 2024

Precio : 4-10000USD

The drill body of the steel body pdc bit is made of a whole piece of alloy steel by machining, and the cutting teeth are made by welding the composite piece on the tungsten carbide material tooth post, and then the cutting teeth are inlaid on the drill body, and the diameter-preserving...

Martes 19 marzo 2024

Precio : 4-10000USD

There is no fixed tooth shape and bearing for the hole opener bit, so it is necessary to select appropriate tooth shape and bearing structure according to different stratum structure. It adopts the palm back tilt, cold inlaid anti - ruin gold design, with the roller anti-peeling structure...

Sábado 16 marzo 2024

Graphite products of vacuum furnace are increasingly widely used in high temperature graphite furnace. They are not only used to manufacture heating graphite rods element and heat insulation screen of vacuum furnace, but also used to manufacture structural parts such as bracket, material tray...

Sábado 16 marzo 2024

Isostatic graphite block are mainly used in solar single, polycrystalline thermal field, semiconductor single crystal thermal field, graphite mold processing, insulation materials (solidified felt, carbon felt, graphite soft felt), graphite electrode (RP/HP/UHP), graphite special-shaped parts...

Sábado 16 marzo 2024

High purity graphite plate is widely used in metallurgy, chemical, electrochemical and other industries, but also used in graphite solar panels, sensors, nano electronics, high-performance nano electronic devices, composite materials, field emission materials and other fields. HOW...

Sábado 16 marzo 2024

Precio : 1-100

BMC SMC thermosetting plastic products are produced by SMC and BMC molding process. PRODUCTS Types of BMC/SMC Molded Products BMC/SMC Motor SMC/BMC plastic edging motor change the traditional material of iron and aluminum to reduces the process but seals more. Servo Motor Plastic-Envelop...

Sábado 16 marzo 2024

Precio : 1-100

SMC Antenna Reflector Mould The satellite earth antenna is the important earth satellite equipment to collect the weak signal from satellite and reduce noise to the lowest level within its ability. The traditional materials for satellite antenna are iron or aluminium. But the better...

Sábado 16 marzo 2024

Precio : 1-100

Flange Molding Flanged joint is the main connection method in pipeline construction. Compared to thermoplastic, thermoset composite can be reprocessed. With high insulating properties, Insulated flange is widely applied in petroleum and chemical and other industries. Flange molding...

Sábado 16 marzo 2024

Precio : 1-100

BMC/SMC Electric Motors Description BMC plastic edging motor replaces traditional iron and aluminum, reduces the process, seals more, and has higher safety factor. It mainly refers to white goods and public motors. High insulation, chemical resistance, high fire resistance, good water resistance...