CUTTING® - 7061 Anuncios

Jueves 01 septiembre 2022

Bronzing is really a good way to make your product stand out and enhance the appeal of the package.With nearly 20 years of experience in the design and manufacture of foil presses, GROWING is always at the forefront of technological advances.When the production line requires a higher...

Jueves 01 septiembre 2022

Because of the market, small, lightweight products are used to offset folding carton packaging.When these small items are displayed on the desktop, the offset mounting solution is obviously offset with the strength of the corrugated board.GROWING's connected offset mounting solution...

Jueves 01 septiembre 2022

For food and beverage, conversion requirements are very high, no matter what size boxes are required high quality.The GROWING die cutting machine has the precision strong alignment ability, can provide medium yield and high-quality production.Even mass production can find the right solution...

Jueves 01 septiembre 2022

Typical packaging for electronics and appliances is made into micro corrugated packaging to provide better protection and appearance.Printing instructions and specifications are usually printed directly on the package and therefore require an adjustable printing method for use in...

Jueves 01 septiembre 2022

The electric pole chain saw used for tree trimming has an extension pole that can extend up to 1.6-2.1m. This battery-powered pole chainsaw can meet the cutting needs of branches of different heights, so you don't need to risk climbing on ladders or trees. The ergonomic rubber soft...

Jueves 01 septiembre 2022

Mini cordless battery-powered 5-inch chainsaw. Portable handheld rechargeable electric chain saw for planting branches, garden pruning, and wood. This small battery operated chainsaw is for one-handed use, is not easy to fatigue, and is suitable for long-term use. The battery chainsaw...

Jueves 01 septiembre 2022

SC-5802 hand-held 8-inch electric battery cordless chainsaw uses high-quality alloy chains, which are wear-resistant and durable. The cordless battery-powered chainsaw has a long service life and does not require frequent replacement. The body of this type of cordless electric chainsaw...

Jueves 01 septiembre 2022

SC-5802B newly upgraded electric chain saw, adding a lubricating oil system on the original basis, which is more convenient to use, maintenance of blades and chains. The cordless mini chainsaw is equipped with two large-capacity 21V batteries. This kind of battery powered electric...

Jueves 01 septiembre 2022

Cantidad : 30 sets of - Precio : $1,000-$10,000

Gmmoldtech CNC component can greatly reduces the number of tooling, and complex tooling is not needed to process complex parts. If we want to change the shape and size of the parts, we only need to modify the processing program of the parts, which is suitable for the plastic molding...

Jueves 01 septiembre 2022

BOYA revamping and repair products, based on upgrading original products to new products, and ensure the new product is better in performance and quality, make the old products with renewed life vigor, in the process of upgrading, BOYA will identify the requirements fully, combine...

Jueves 01 septiembre 2022

BOYA Precision Industrial Equipment Co., LTD. side trimmer, scrap chopper, flying shear, and other shear metallurgical equipment quality and delivery schedule are reliable. By differentiation development strategy with "We have what others have not, and ours are better in quality than others ...

Martes 30 agosto 2022

Fine blanking is short for precision blanking. Orienson's Fine Blanking Parts Fine blanking is a kind of precision stamping processing technology developed on the basis of general blanking. Although it belongs to the separation process with general blanking, it contains the processing...

Jueves 25 agosto 2022

Cantidad : 120sets/ye - Precio : USD1000-500000

Gabion machine line, also known as gabion mesh machine, its purpose is to produce wire mesh, and then the complete net is folded and connected into a complete stone cage net box. The basic working principle is the interweaving of horizontal and vertical screens. As a gabion machine manufacturer...

Jueves 25 agosto 2022

Cantidad : 120sets/ye - Precio : USD1000-500000

Cold Forging Header Machine Metal tech Cold Heading Machine, the function is the first molding and the second punching products, which is mainly used for forming the heads of the screw products, the work principle is line materials calibration, accessing lines, sending materials to the main mold...

Miércoles 24 agosto 2022

Cantidad : 200set/mon - Precio : 50000-200000

Wire mesh shot blasting machine or wire mesh belt shot blasting machine is suitable for continuous blasting thin and collision-sensitive die castings, pressure castings, ferrous and non-ferrous castings, forgings, automotive accessories, and weldments. Workpiece weight ranging from 1kg to 100kg...

Miércoles 24 agosto 2022

Details of 3.0 Uncoated/ Coated The wide choice of jumbo biopsy forceps ensures that you are perfectly equipped for every application. MICRO-TECH offers forceps with diameters of 1.8 mm, 2.3 mm and 3.0 mm in addition to lengths of 120, 180, 230 and 250 cm. Regardless of whether they are tapered...

Miércoles 24 agosto 2022

Details of 2.3 Coated/Uncoated alligator forceps endoscopy The wide choice of disposable biopsy forceps ensures that you are perfectly equipped for every application. MICRO-TECH offers forceps with diameters of 1.8 mm, 2.3 mm and 3.0 mm in addition to lengths of 120, 180, 230 and 250 cm...

Miércoles 24 agosto 2022

Details of 1.8 Coated/Uncoated The wide choice of disposable biopsy forceps ensures that you are perfectly equipped for every application. MICRO-TECH offers forceps with diameters of 1.8 mm, 2.3 mm and 3.0 mm in addition to lengths of 120, 180, 230 and 250 cm. Regardless of whether...

Martes 23 agosto 2022

Precio : 5000-50000USD

The china label die-cutting machine is all kinds of trademarks processed into the final product must be the machine. The steps of the die-cutting process are as follows: unwinding - die cutting - scraping - winding or crosscutting. Unwinding the gas up the shaft. Die cutting is the...

Sábado 20 agosto 2022

E-Grind's Saw Grit series are with cube-octahedron particles, for stone and construction engineering industries such as Granite, Marble, Concrete, Asphalt, Bricks etc. It provides premium thermal stability and impacts resistance performance. Saw Grit Diamond for Sale Synthetic Diamond...

Sábado 20 agosto 2022

Resin bond microndiamondis made from Diamond Resin Bond Mesh. It has a multi-crystalline structure, rough surface, and uniform shape. The sharp edges always generate during cutting, grinding, lapping, and finishing. With such unique characteristics, Diamond Resin bond micron provides...

Sábado 20 agosto 2022

Each Particle is with sub-crystal structure. Irregular and Very rough surface. New cutting edges come out during working. Also available in electroless plating of both nickel (30% and 56% by wt.) and copper (50% by wt.) allowing for better crystal retention in both phenolic and polyimide...

Sábado 20 agosto 2022

Cantidad : 23 million - Precio : 0.5-3

Riken RMC AP57 is adopted specially treated coat can prevent the static efficiently. Riken RMC AP57 has a high anti-clogging property and is widely used in board material, furniture, wood floor, leather, textile, and metal. High-quality EWT backing paper, high tough and flexible,...

Sábado 20 agosto 2022

Cantidad : 23 million - Precio : 0.5-3

WHOLESALE SANDING DISCS AP47M Velcro Disc, PSA DiscAP47M Velcro Disc,PSA Disc RIEKN RMC Dwt paper AP47M adopts Dwt paper backing and zirconium oxide mixed grain with a wide application area. RIEKN RMC Dwt paper AP47M is mainly used in sanding wheel hub in the form of a disc. Wholesale...

Viernes 19 agosto 2022

Precio : 1000-50000USD

Round Duct Lock Seam Machine Performance Features: Model Thickness of plate(mm) Machining length(mm) Weight(kg) Power(kw) Dimensions(mm) L*W*H YJB-1250 0.4~1.2 1250 350 0.75 2250*610*1450 It's automatic type used for 0.4~1.2mm sheet metal duct lock seam closing, this...

Viernes 19 agosto 2022

Precio : 1000-50000USD

Round Duct elbow making machine Performance Features: Model Sheet thickness(mm) Diameter(mm) Weight(kg) Power(kW) Dimensions(mm) L*W*H BAW-1.2*1000 1.2 120~1000 450 3 2220*920*10500 It's also used for interface modeling and commissure of shrimp elbow tube, also elbow...

Viernes 19 agosto 2022

Precio : 1000~50000USD

Description of rectangular duct forming machine: As an essential equipment during duct processing, rectangular duct machine includes many machines which can finish all process. All machines can be used freely with other needed machines. This is a very economical choice for making HVAC duct...

Viernes 19 agosto 2022

Precio : 1000-50000USD

Pneumatic Lock Seam Machine Performance Feature: Pneumatic lock seaming machine is the convenient one which can be used to lock max length 1250 mm rectangular air tube. The machine needs to connect with air pump. Its advantage are efficiency and labor-saving. It's convenient to operate...

Viernes 19 agosto 2022

Precio : 1-10usd

Sheet Metal Chassis Parts Material: Stainless steel galvanized steel electrolytic plate Thickness : 1.5mm/ 1.8mm/ 2.0mm/ 2.5mm/ 3.0mm/ 4.0 mm/ 5.0mm/ 6.0mm Processing: blanking - deburring - flanging and tapping m3- bending - black sand grain powder(This surface treatment is scratch-resistant...)

Jueves 18 agosto 2022

The F-theta scanning lenses are commonly used in laser scanning systems that employ two-axis galvanometers to scan a specified area but cannot tolerate the angle at the image plane. By introducing a specified amount of barrel distortion in a scanning lens, thetelecentric f theta lens...