COPPER - 5717 Anuncios

Thursday 27 August 2020

Cantidad : 100 sets / - Precio : USD2206-USD73529

The copper foil slitting machine is suitable for the slitting of straw paper, aluminum foil, copper semiconductor, PET CCL, BOPP, PET, CPP, PE, PVC, film, paper, etc. Features of HC-C650/1300/1600B Surface Type Slitting Machine Use This machine is suitable for the slitting of straw paper...

Thursday 27 August 2020

Cantidad : 100 sets / - Precio : USD2206-USD73529

Ultrasonic rectification---automatic detection and rectification---high accurate magnetic powder clutch---the unwinding and rewinding tension can be controlled---response sensitively---low noise. Features of HC-650 Automatic Coil Slitter Rewinder Machine USE of HC-650 Automatic Coil...

Thursday 20 August 2020

Precio : 0.01-100 USD/PCS

Sintered Neodymium Magnets Sintered neodymium magnet is the strongest magnetic material commercially available today. It is largely made of alloy of neodymium, iron and boron, and the chemical formula is Nd2Fe14B. Sintered NdFeB neodymium magnet exhibits high magnetic energy product...

Thursday 20 August 2020

Precio : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 3/4" in diameter, 1/8" in thickness, with the pull force of 11.7 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Thursday 20 August 2020

Precio : 0.01-100 USD/PCS

This powerful neodymium arc magnet measures OD1.5" xID1.25" x0.75" Lx90 Degree. The 4 pieces of this arc magnets can form a circle with OD=1.5" , ID=1.25" and height =0.75" with working temperature of 302 degree Fahrenheit or 150 degree celsius. It is made from an alloy of neodymium...

Thursday 20 August 2020

Precio : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 10mm in diameter, 3mm in thickness, with the pull force of 3.45kg vertically. It is made from an alloy of neodymium, iron, and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Thursday 20 August 2020

Precio : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 3/4" in diameter, 1/8" in thickness, with the pull force of 9.76 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Thursday 20 August 2020

Precio : 0.01-100 USD/PCS

This powerful neodymium block magnet measures 1" in length, 1/4" in width, and 1/2" in thickness, with the pull force of 18.71 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection...

Thursday 20 August 2020

Precio : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 3/8" in diameter, 1/2" in thickness, with the pull force of 8.5lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Thursday 20 August 2020

Precio : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 1/2" in diameter, 1/16" in thickness, with the pull force of 3.84lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Thursday 20 August 2020

Precio : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 1/2" in diameter, 1/16" in thickness, with the pull force of 3.1lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Wednesday 19 August 2020

Flexible PCB is generally made of a flexible insulating substrate and is a flexible material that can be bent and flexed arbitrarily. FPC is favored for its lightweight, thin thickness, and free bending and folding. FPC is generally used in boards that need to be repeatedly flexed...

Wednesday 19 August 2020

Hot air solder leveling of hasl pcb, which is a process of coating molten tin-lead solder on the surface of the PCB and leveling (blow-out) with heated compressed air to form a coating layer that is resistant to copper oxidation and provides good solderability. Hot air leveling is...

Wednesday 19 August 2020

Goldfinger is gold plated on the edge of the board. We have an automatic Goldfinger production line that can provide you with professional and fast Goldfinger PCB production. Insert one end of the PCB board into the connector card slot, and use the plug pins of the connector as the...

Wednesday 19 August 2020

SPEEDAPCB has been focusing on the production of various PTH (plated through hole PCB), buried via hole PCB and blind via hole PCB, and HDI PCB prototype. When it comes to blind and buried hole circuit boards, everyone thinks of HDI boards. Generally, there are more blind and buried...

Wednesday 19 August 2020

Immersion nickel / gold is a thick layer of nickel-gold alloy with good electrical properties and can protect the PCB for a long time. Unlike OSP PCB Board, which is only used as a rust-proof barrier layer, it can be useful and achieve good electrical properties during long-term use of the PCB...

Thursday 06 August 2020

Cantidad : 1000tons - Precio : 100USD

The industrial gas pipe is a special pipe for conveying flammable gas. It is a metal gas pipe hose to replace the traditional buckle rubber hose, which can solve the problem that the rubber pipe is easy to fall off, easy to aging, easy to bite, and has a short service life. The steel...

Thursday 06 August 2020

Precio : US $1 - 3,000 / Set

ZECO is a butterfly valve china manufacturer, the main production is water butterfly valves and so on. The rubber lined butterfly valve is especially widely used in operating conditions due to small installation and price advantage. Butterfly valves are usually used in switch valves...

Thursday 06 August 2020

Precio : US $1 - 3,000 / Set

- Basic information of Bronze Adjustable Dynamic Flow Balancing Valve - This valve is required to maintain the flow of these or end equipment at all times within the working differential pressure range. As the system pressure fluctuates, the valve will automatically move up and down...

Thursday 06 August 2020

Precio : US $1 - 3,000 / Set

Backflow Preventers The problem of contaminated water due to backflow is emerging, and the health hazards caused by contaminated water are also alarming to engineers and water equipment suppliers. The problem of backflow water may occur in every place where water is used. We can learn...

Thursday 06 August 2020

Precio : US $1 - 3,000 / Set

Air Valve Each of ZECO's single industrial air release valve and double orifice air discharge valve is a high-quality combination water air relief valve, suitable for various sewage and wastewater systems and operating conditions. ZECO's air release valve uses an irregular round stainless...

Friday 31 July 2020

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

What is PCD wire drawing dies used for? The diamond wire drawing die blank is made by sintering diamond micropowder under the action of various metals (containing cobalt) catalysts using ultrahigh temperature and ultrahigh-pressure processes. During the sintering process, high-strength...

Friday 31 July 2020

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

CVD diamond (chemical vapor deposition diamond). The mixture of carbon-containing gas and oxygen is excited and decomposed at a high temperature and a pressure lower than the standard atmospheric pressure to form an active diamond carbon atom, and the deposit is alternately grown...

Friday 31 July 2020

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

With more than 30 years experience, E-Grind provides various types of coating onto diamond and CBN mesh and micron powder. As per the bond system, E-Grind supplies customers with the most suitable coating onto the superabrasive grits. The coating enhances the retention ability between...

Friday 31 July 2020

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

CBN micron powder has unique characteristics in thermal stability, working efficiency, and sharpness. It can be used in resin, metal, and vitrified systems, for precise grinding, polishing and finishing workpiece surface, PCBN blank manufacturing. It works as free grinding particles...

Monday 27 July 2020

Precio : 12000000 millions us

Fábrica que fabrica cátodos de cobre para la venta en RD Congo. La fábrica ya está en operación y produce de 42 a 66 toneladas por día y tienen todos los documentos y la licencia de importación y exportación de comercio exterior. La fábrica está compuesta por 8 hectáreas, 3 hornos de gallo...

Thursday 23 July 2020

Cantidad : Jusqu'à 20 - Precio : LME-20%

empresa con sede en Tanzania que vende cátodos de cobre de origen DRC y Zambia. Precio: CIF LME -20% para el vendedor y 2% de comisión para el Agente del cliente producción: prueba 2000MT 5000MT a 20000MT / mes Condición o garantía que une al comprador y al vendedor. Nota: para depositar...

Friday 17 July 2020

Cantidad : De 3000 à - Precio : Lme-22%

Representamos directamente a un proveedor de cátodos de cobre en Tanzania cuyo origen es la RDC, Sudáfrica y Zambia. Ofrecemos precios atractivos. Y nos alegrará que venga si tiene miedo de pagar un anticipo para comprar un primer intento y el resto se lo enviaremos en silencio desde su hogar...

Saturday 04 July 2020

Cantidad : 100 units - Precio : USD18000-280000

In order to protect the fruit like apple, pear etc. during transportation, there designs the apple tray, which is also made by waste paper. This kind of molded pulp products is always used in fruit tr... Description In order to protect the fruit like apple, pear etc. during transportation...

Saturday 04 July 2020

Cantidad : 10 - Precio : As request

Tipo de producto: montaje de PCB de aluminio Material: material de aluminio. Capa / Espesor: 4L / 1.6mm Cobre Externo: / 1.5 OZ Tratamiento superficial: ENIG Ancho mínimo de línea: ≥ 0.3 mm Espacio mínimo de línea: ≥0.35 mm Agujero mínimo: ≥0.35 mm Características técnicas: material...