Digital Display Pressure Transmitter
NCS Series of Intelligent Transmitters are digital, intelligent, network-based, merged with advanced, reliable and stable sensor technology, to be designed as a new generation of Fieldbus Intelligent Transmitter.
NCS Series of Intelligent Transmitter have been designed with high precision and high reliability, high stability. The pressure, temperature, currents and other physical quantities are displayed on LCD module. Zero drift, range settings and many other functions, are realized by the magnetism bar operation. The interoperability between different systems and equipments are realized by the Equipment Description Document, which is coMpatible to a variety of device management software, and adapting to harsh electromagnetic environment. NCS Series of Intelligent Transmitter have been used in inflammable and explosive places according to Intrinsically Safety Design.
Basic parameters
|
Measure Object |
Liquid, Gas, Stream |
|
|
Power |
9~32V DC(FF,PA) 9~32v DC (FF, PA Explosion-Proof Instrument) 11.9~42 V DC (HART) 11.9~30 V DC (Hart Explosion-Proof Instrument) |
|
|
Output |
Analog: 2 Wire 4~20ma Digital: HART, FF AND PA Signal |
|
|
Load Resistant |
0~1500ohm (Common) 250~550ohm (With Hart) |
|
|
Insulation |
Input And Output Insulating Voltage: 500vrms (707vdc) |
|
|
Display |
Optional 6 Bits Digital Number Or 5 Bits Characters LCD Display |
|
|
Temperature Scale |
Work Temperature: -40 ~ 85℃ (No Display) -30 ~ 70℃ (Display) -30 ~ 60℃ (Explosion-Proof) Store Temperature: -40 ~ 100℃ (No Display) -40 ~ 85℃ (Display) |
|
|
Allowed Media Temperature Measured |
-40 ℃~ 110 ℃ (Type Name Include ‘IC‘) -40 ℃~ 149 ℃ (Silicone Oil) -40 ℃~ 204 ℃ (Sylthlem800) -18 ℃~ 204 ℃ (Inert Liquid) -40 ℃~ 104 ℃ (Others) |
|
|
Humidity Scale |
5%~100%Rh |
|
|
Start Time |
≤ 5 Seconds |
|
|
Refresh Time |
0.2 Seconds |
|
|
Dump Adjusting |
Time Constant 0~15 Seconds |
|
|
Change Of Cavity |
< 0.16 Cm3 |
|
|
Static Pressure Limit |
SR |
Range 2: 1000psi (6.89Mpa) |
|
SD |
Range 3~8: 2000psi (13.8Mpa) |
|
|
SG |
Range 3~8: 2000psi (13.8Mpa) Range 9: 4500psi (31.0Mpa) Range 0: 7500psi (51.7Mpa) |
|
|
SA |
Range 4: 58psi (400Kpa) Range 5: 218psi (1500Kpa) Range 6: 435psi (3000Kpa) |
|
|
SH |
Range 4~7: 4500psi (31.0Mpa) |
|
|
The Overpressure Limits |
SG |
13.8Mpa (Gauge Pressure) Range 3～8 31.0Mpa (Gauge Pressure) Range 9 51.7Mpa (Gauge Pressure) Range 0 |
|
SA |
13.8Mpa |
|
|
Static And Unidirectional Overpressure Ranges |
SR |
3.45 Kpa (Absolute Pressure) ～ 6.89Mpa (Gauge Pressure) |
|
SD |
3.45 Kpa (Absolute Pressure)～ 13.8Mpa (Gauge Pressure) |
|
|
SH |
3.45 Kpa (Absolute Pressure)～ 31.2Mpa (Gauge Pressure) |
|
|
Explosion-Proof Type |
Safety Type, Explosion Proof Type |
|
|
Electromagnetic Compatibility |
In Line With The GB/t 18268-2010 |
|
|
Level Of Protection |
IP65/IP67 |
|
|
Humidity Range |
0%～95%Rh |
|
Performance Index
|
Precision |
The Accuracy Is ±0.075% Of The Regulated Range.If The Range Regulated Is Less Than 1/10 Of The Maximum Range, The Accuracy Is ±[0.025 + 0.005 × (Maximum Range/Range Regulated)]% |
|
|
Temperature Influence |
Every 28℃(50 ° f)Range ≥0.1 Maximum Range: ±[0.019% Maximum Range + 0.125% Maximum Range]Adjustable Range < 0.1 Max Range: ±[0.025% Max Range + 0.125% Adjustable Range] |
|
|
Stability |
Not Exceeding ±0.1% Of The Maximum Range Within 12 Months |
|
|
Static Pressure Influence |
SR |
±0.5%/ 6.89Mpa Of The Maximum Range |
|
SD |
±0.25%/13.8Mpa Of The Maximum Range |
|
|
SH |
±0.25%/31.0Mpa Of The Maximum Range |
|
|
Installation Position Influence |
The Maximum Zero Drift Is 0.24Kpa |
|
|
The Power Influence |
Less Than 0.005%/v Of The Calibration Range |
|
|
Vibration Influence |
Any Axial 0 ~ 200hz, The Error Is ±0.05%/g Of The Maximum Range |
|
|
Electrical Connections |
1/2-14 NPT Internal Thread |
|
Process Connection |
1/4-18 NPT Internal Thread |
|
Structural Materials |
Isolation Diaphragm: 316l Stainless Steel, Hasteley C, Monel Or Tantalum Exhaust/Drain Valves: 316 Stainless Steel, Hastelloy C Or Monel Flanges And Transition Joints: 316 Stainless Steel, Hasteley C Or Monel Contact Medium "o" Ring: Nitrile Rubber, Fluorine Rubber Filling Fluid: Silicone Oil Bolts: Galvanized Carbon Steel Electronic Housing: Low Copper Aluminum Alloy Coating: Polyester Epoxy Resin |
|
Weight (Excluding Options) |
With Display Model：3.6kg Without Display Model：3.3kg |
jiang.yuhang@microcyber.cn +86 18304037682
Persona a contactar : Yvette Jiang, +86 18304037682
Buen trato: comprar del vendedor
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
|
Esta página es acerca de los importadores y exportadores de Digital Display Pressure Transmitter Buscar en la categoria : Bienes de equipo Buscar en la categoria : transmitter, pressure, display, digital |
CM23 2JP TelefoníaReportar abuso
Viernes 04 marzo 2016
Cantidad : 150 - Precio : 280,00 €
Vous vérifiez vos dizaines et des dizaines de fois par jour iPhone, probablement plus. La saisie d'un mot de passe chaque fois que vous ralentit juste. Mais vous le faites parce que faire en sorte que personne d'autre n'a accès à votre iPhone est important. Avec iPhone 5s, entrer...
Electronics Design Services
- CM23 2JP - Hertfordshire
- +447405858765
74335-100 AlimentaciónReportar abuso
Jueves 14 noviembre 2024
Coco crémeux (crème de noix de coco, biscuits aromatisés). - Cx 3 kg - Pote 160g Flocons de crème (flocons aromatisées, crème et chocolat). - Cx 3 kg - Pote 160g Beignet à la canelle (biscuits au beurre et à la cannelle). - Cx 4 kg Pour des produits similaires à ceux presentés...
Syntony Trade International
- 74335-100 - Goiania
- 556232874260
- 556299683152
41130 AlimentaciónReportar abuso
Viernes 20 noviembre 2015
Our range of Olive oil and olives have several sort of packing! We provide to the markets the best quality products – Greek Extra Virgin olive oil ( BIO organic olive oil and conventional ) Designation of Origin (PDO) and protected geographical indication (PGI) olive oil, and olives...
HCL Suppliers
- 41130 - Udon Thani
- +66 9 95 32 09 64
