CUCW-N142 Unitized Curtain Wall
Model No. CUCW-N142 is a self-designed, tested, and certificated unitized curtain walling system by CAS team. It is a cost efficient and performance unitised curtain wall system, which combines minimal aesthetics with structural stability. Its structural silicone glazing construction offers maximum transparency at the external surface of the facade. Modular units, including glazing panes, are prefabricated in workshop conditions and this results in a fast and economic installation with minimum manpower and tooling requirements. This construction mode, renders CUCW-N142 an ideal unitised system for high rise buildings,where meeting demanding deadlines is a prerequisite.
Overview of CUCW-N142 Unitized Curtain Wall
|
System |
Unitized Curtain Wall(Non-Thermal Break) |
|
Model No. |
CUCW-N142 |
|
Material |
Aluminum Alloy/Glass/Aluminum Sheet/Aluminum Composite Panel/Galvanized Sheet |
|
Glass Type |
Tempered/Float/Laminated/DGU/Ceramic Fritted/LowE/Tinted/Reflective/Heat Soak |
|
Cooperated Glass Brand |
Vitro(Formerly PPG)/Pilkington/Xinyi(SYG)/Yaopi(SYP)/Fuyao/Southglass(SG)/King/CNG/Ta iwanGlass |
|
Surface Treatment |
Powder Coating/PVDF/Anodized/Electrophoresis/Wooden Grain |
|
Profile Brand |
6063-T5/6063-T6/6061-T6(Brackets) |
|
Thermal Profile |
Non-Thermal Break |
|
Standards |
In Compliance With ASTM/AS/NZS/AAMA/NFRC/EN/BSI/ISO |
|
Application |
Residential Apartment, Villa/Commercial Hotel, Mall, Office, Public Organization |
|
System Customziation |
Available |
Data of CUCW-N142 Unitized Curtain Wall
Testing Data of CUCW-N142 Unitized Curtain Wall
|
Test |
Pressure |
Results |
|
Preloading(Clause 8.2.2 of AS/NZS4284: 2008) |
+1.46kpa |
No separation, plastic deformations, or deleteriousness was observed. |
|
-1.90kpa |
||
|
Preliminary Water Test under Static Pressure (Clause 8.2.3 of AS/NZS 4284: 2008) |
+438kPa |
There were no leaks. |
|
Preliminary Water Test under Cyclic Pressure (Clause 8.2.3 of AS/NZS 4284: 2008) |
219-438-219 (Pa) |
There were no leaks. |
|
292-584-292 (Pa) |
||
|
438-876-438 (Pa) |
||
|
Structural Test at Serviceability Limit State Wind Pressure (Walls)(Clause 8.3 of AS/NZS 4284: 2008) |
+1.46kpa |
During the structural test at SLS wind pressure, the deflections of all related members were within the allowable deflection limits. |
|
-1.90kpa |
||
|
Air Infiltration Test (Clause 8.4 of AS/NZS 4284: 2008) |
+/-150Pa |
The rate of air leakage of the specimen was within the allowable values. |
|
Water Test under Static Water Test under Static 4284: 2008) |
+438Pa |
There were no leaks. |
|
Water Test under Cyclic Pressure (Clause 8.6 of AS/NZS 4284: 2008) |
219-438-219 (Pa) |
There were no leaks. |
|
292-584-292 (Pa) |
||
|
438-876-438 (Pa) |
||
|
Structural ProofTest at Ultimate Limit State Wind Pressure (Wells) (Clause 8.8 of AS/NZS 4284: 2008) |
+2.26kpa |
No collapse of the test specimen was observed under the specified pressure. |
|
-2.94kpa |
||
|
Seal Degradation Test(Clause 8.10 of AS/NZS 4284: 2008) |
219-438-219 (Pa) |
No water leakage was observed. |
|
292-584-292 (Pa) |
||
|
438-876-438 (Pa) |
Thermal Data of CUCW-N142 Unitized Curtain Wall
|
NFRC Procedures |
NFRC100SB, NFRC200-2010, and NFRC500-2010 |
|
Software Tools |
THERM 7.4.3.0 and WINDOW 7.4.6.0 |
|
Configuration |
6 CLR-TDE33D 8mm HS #2 + 12AR + CLR 10mm HS IGU |
|
Panel Dimension |
1505mm Wide 2945mm High |
|
Frame |
Painted Aluminum |
|
Panel U-value |
2.765W/m2k |
|
Visible Light Transmission |
0.246 |
|
SHGC |
0.179 |
Frame Data of CUCW-N142 Unitized Curtain Wall
|
Parts Location |
Frame Area/m2 |
Edge Area/m2 |
U-Value(Frame) |
U-Value(Edge) |
|
W/m2k |
W/m2k |
|||
|
Header |
0.058 |
0.086 |
4.1858 |
1.1968 |
|
Left Jamb |
0.127 |
0.166 |
14.8377 |
1.6873 |
|
Right Jamb |
0.127 |
0.166 |
23.7685 |
1.9897 |
|
Sill |
0.328 |
0.086 |
5.7542 |
1.5668 |
Glass Data of CUCW-N142 Unitized Curtain Wall Manufacture
|
Glass Data: CLR-TDE33D 8mm HS #2 + 12AR + CLR 10mm HS IGU |
|||||||
|
Visible Light |
SHGC |
SC |
NFRC U-value |
STC |
|||
|
W/m3k(Argon) |
|||||||
|
T% |
R-out% |
R-in% |
Winter |
Summer |
|||
|
29 |
19 |
15 |
0.19 |
0.22 |
1.55 |
1.54 |
36 |
Benefit of CUCW-N142 Unitized Custom Curtain Wall
Guaranteed waterproofness & airtightness
Great quality control from factory
Lower on-site installation cost
Shorter project schedule
Enhancement of natural light
Increased static robustness, even in extreme natural phenomena
Minimum after sales service & maintaining
Increased comfort level
If you want to know more details of unitised system facade, please visit our website.
Persona a contactar : facade Cas, 0757 87655056
Buen trato: comprar del vendedor
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
|
Esta página es acerca de los importadores y exportadores de CUCW-N142 Unitized Curtain Wall Buscar en la categoria : Varios / Descuento Buscar en la categoria : n142, wall, cucw, curtain, unitized |
Wednesday 30 September 2015
Cantidad : 50000 - Precio : depend de quantite
Alta calidad, agradable al tacto, ligero, suave, Ultra-absorbante y secar rápido: tu Fouta seguirá, en su cuarto de baño, en la piscina, en la playa, en la transat, el barco o pareo, alrededor de los bebés, los niños fuera de la bañera. En su equipaje de mano o en la cesta de playa...
artisanat Tunisien
- med.SGHAIER
- 5099 - Tunisia,Monastire
- +21 6 26 10 49 12
- 26104912
Saturday 20 February 2016
Cantidad : 100 MT PER - Precio : 2000 usd per mt CIF
Hemp seeds Product Name: Hemp seed extract Latin Name: Cannabis sativa L Appearance: Brown yellow powder Part used: Seed Application: Health-care products Shelf Life: 24(month) Name Hemp Seed Botanical source Cannabis sativa L. Specification 3.5mm belwo,3.5-5.0mm...
Khun Jack Partnership Ltd
- 5000 - Chaing Mai
- +66 9 68 75 20 43
Wednesday 14 September 2016
Cantidad : 5000 - Precio : 50,00 €
Gate Valves (F7 Type) DIN Standard F7 Gate valves / (Length acc.to DIN EN 558-1,face to face series 26 ) DIN F7 Gate valve DIN Absperrschieber F7 DIN Válvulas de compuerta F7 DIN F7 šoupátko stavební délka dle DIN EN558-1 serie 26 DIN Standard F7 sluseventil (lengde iht. DIN EN 558-1...)
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935





