Varios / Descuento

D60 Series MOV Block for Line Surge Arrester

D60 Series MOV Block for Line Surge Arrester

The D60 Series MOV for Line Surge Arrester is a high-performance metal oxide varistor (MOV) block. It is designed to provide optimal protection against line surges in 330kV lines. The MOV block is made of a special material that is able to absorb and disperse large amounts of energy, allowing it to withstand voltage spikes. It is able to absorb up to 3000 times its own weight in energy, making it an ideal choice for high-voltage applications. The D60 Series MOV for Line Surge Arrester is designed for long-term, reliable protection, and is UL and CSA certified for safety.

The nouns, parameters and corresponding test methods in this parameter list conform to the standards of IEC60099-4: 2014 and GB11032-2020.

The rated voltage, power frequency reference current and power frequency reference voltage are reference values.

The 2ms square wave tolerance value is based on the declared current/2ms repetitive charge transfer charge Qrs=423, if the actual test waveform 2ms current/2mS repetitive charge transfer charge Qrs is not equal to 423, it should be corrected according to the actual 2ms current waveform and Qrs value.

The charging rate of the aging test was 90%.

The number of pulses for the high current withstand value is two.

Advantages of D60 Series MOV for Line Surge Arrester

D60 Series MOV for Line Surge Arrester provides significant advantages for 330kV line surge arrester. This type of MOV varistor block provides high reliability and stability, and is designed to be resistant to extreme temperatures and environmental conditions. Additionally, it offers superior surge protection and high-speed response, as well as the ability to handle large current. This makes it an ideal choice for a wide range of applications in electric power systems. As a leading metal oxide varistor manufacturer, we ensure our D60 series MOV block for line surge arrester is designed with the metal oxide varistor mov function, providing optimal protection and performance. Our zno blocks are engineered to withstand extreme conditions, offering superior surge protection for your critical power systems.

Ubicación : No.53, Hong Guang Road, He Ping Industrial Park, San Qiao, Xi'an, China., 710086 xian,
Persona a contactar : xatge xatge, 029 84362608

Buen trato: comprar del vendedor

Visita nuestra guía para una transacción segura! En ningún caso Algomtl no se hace responsable de los anuncios. Sólo la responsabilidad del vendedor o del comprador en caso de litigio está involucrado.
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de
D60 Series MOV Block for Line Surge Arrester

Buscar en la categoria : Varios / Descuento
Buscar en la categoria :
series, line, surge, block, arrester
Taiwán 24158 Bienes de equipo
Small Hole Drilling EDM Series D50,D60,SD60

Jueves 06 agosto 2015

Cantidad : 30 sets

Manual type & CNC Drilling EDM profession manufacturer. Drilling capacity dia. is fromФ0.1mm to Ф6.0mm. High verticality (deviation) is lower than 0.03. Inbuilt water filtration system and pure water available. Ion Exchange Resin Treatment Filter support more machines and...

Sane Kuei Machinery Co., Ltd

Detector de humo EI ELECTRONICS EI650 autónoma de 10 años

Viernes 09 septiembre 2016

Cantidad : 400 - Precio : 8,00 €

Déstokage 400 detectores de humo EI ELECTRONICS EI650 fabricado en Europa con una batería de litio hasta autónoma en 2026 (20 estuches de 20 detectores con tornillos de montaje de pared y manual de instrucciones en francés). CARACTERÍSTICAS TÉCNICAS - Botón de prueba y descanso...

DOMERCA

  • 69100 - VILLEURBANNE
  • 06 25 41 37 41
Taiwán 24158 Bienes de equipo
CNC Sliding Single-Column EDM Series M430~M3010

Jueves 06 agosto 2015

Cantidad : 30 sets

The X. Y& Z axis utilizes AC servo motor. Multi-cavities machining, ORBIT-CUT machining & Helix machining. A.T.C. (Automatic Tool change) & C-axis machining available. The Circle Angle of Sparking is lower than 0.02mm. The best surface roughness (Ra) is better than 0...

Sane Kuei Machinery Co., Ltd