Bienes de equipo

Enameled Wire Stripping Machine

Enameled Wire Stripping Machine

Installation and use of enameled wire stripping machine.

Choose appropriate peeling wheel and install them on the machine. Put two enameled wire in the middle of the peeling wheels, set up two peeling wheels to clamp the enameled wire and gently hold the coil part with your hand then press the switch. To test the stripping effect, you can adjust the pressure between the two peeling wheels and control to achieve the ideal effect. When you start, put the enameled wire between two peeling wheels then pull out the wire easily from the wheels. So the peeling work is completed. For when the machine works, high-speed peeling wheels will rub against the insulation and the oxides of the enameled wire. After being peeled, the surface is shiny clean. When the surface of the nylon fiber peeling wheel is uneven or bump, it can cause disconnection or dirty peeling wheel. Fixing is required under this circumstances. You can use a cloth to smooth the wheel until the two strip wheel can smoothly contact. Regularly trim the peeling wheel and this will increase the life of the peeling wheel. When you need to replace the wheel, you can start the work again as long as you remove the wheel that you can no longer use, and then insert the new paint wheel. When we install wire stripping wheel, it should be noted that the wire wheel has direction.

Safety technical operation procedures.

1. When an abnormal situation occurs in the work, the power supply should be cut off immediately, and the concerned person should be asked to check and troubleshoot.
2. When scraping the enameled wire, it is necessary to prevent the enameled wire from being sucked into the wire stripping machine and pay attention to the heat of the enameled wire.
3. Shut down the power supply when the enameled wire is not scratched.

Ubicación : 11th Floor, JingZuan Building, No 875,XIAOLIN ROAD,KUNSHAN CITY, 215316 Jiangsu,
Persona a contactar : Lee Salome, 0086 0512 57169166

Buen trato: comprar del vendedor

Visita nuestra guía para una transacción segura! En ningún caso Algomtl no se hace responsable de los anuncios. Sólo la responsabilidad del vendedor o del comprador en caso de litigio está involucrado.
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de
Enameled Wire Stripping Machine

Buscar en la categoria : Bienes de equipo
Buscar en la categoria :
stripping, enameled, machine, wire
Taiwán 833 Vehiculos
Side Opening Gear Shift Lock

Martes 11 agosto 2015

Precio : 1$ ~30 $

One Lus International is a professional gear shift lock manufacturer in Taiwan and provides a series of gear shift lock to meet customer's needs. The side opening gear shift lock is easy to operate and convenient to use. The top opening gear shift lock is suitable for automatic & manual...

One Lus International Co., Ltd.

Máquinas de Artes Gráficas RYOBI 522, 512, 3302M, 520, 510, 500

Viernes 27 septiembre 2013

Cantidad : 7 - Precio : 1,00 €

Con mucho placer, le ofrecemos, en lote, nuestras dos máquinas siguientes disponibles para la venta: Ryobi 512, Año 1997 36,5x52 - 2 Colores - S/N 1582 - ca. 7 Mio impresiones, Mojado , Marcador continuo, Control de la delantera y de doble hoja, Sistema de ajuste rápido, Cilindro...

ACS DIFFUSION s.a.s.

  • acsdiffusionsa
  • 42952 - Saint-Etienne
  • 0033 (0)4 77 92 77 88
  • 06 10 63 37 83
Francia 015400 Alimentación
2014 GSW pumpkin kernel pumpkin seeds Grade AA,A, AAA

Miércoles 18 diciembre 2024

San Xin Trade Co., Ltd. is a factory engaged in producing and export sunflower kernels,shine skin pumpkin seeds kernels,pumpkin seeds grown without shell. The company located in HeTao plain,Inner Mongolia,here is the original place of sunflower and pumpkin which has rich sunshine...

San Xin Trade Co.,Ltd

  • Aimme
  • 015400 - Shanba
  • +86 478 6620015