Family Mould
Precio : 5000-30000
Family Mold Injection Molding 491138
Mould Name: 1+1 Family Mould
Part Material: PA6 GF30
Product Size: 78*35.6mm
Product Description: Scharnier right & Left
Mould Cavity: 1 + 1 Cavity
Mould Size: 350*400*498MM
Mould Cavity Steel: 8407
Mould Injection System: 3-plate point gate
Mould Ejection System: ejector pin
Mould Cycle Time: 22s
Mould Life Cycle: 500,000
Lead Time: 35 working days
Mold export to: Europe
What is the family mold?
A mold that can only produce one product at a time is called a single-cavity injection mold. If an industrial mould is used to produce two or more plastic parts at a time, multi-cavity injection, if the parts are different, such a mold is called family mold.
The plastic parts produced by the single cavity mold have high precision, easy control of process parameters, simple mold structure, low mold manufacturing cost and short cycle time. However, the productivity of plastic molding is low, and the cost of plastic parts is high, which is suitable for large plastic parts, high precision requirements or small batches and trial production.
The plastic parts produced by the multi-cavity mold or family mold have low precision, it is difficult to control the process parameters, the mold structure is relatively complicated, the mold cost is high, and the cycle time is longer. However, productivity is higher, the cost of plastic parts is lower, and it is suitable for large quantities and long-term production of small-sized plastic parts.
The number of cavities is often determined by factors such as budget, clamping force, plastic part structure, and injection volume.
When designing a multi-cavity mold, one method is to determine the model of the injection molding machine, and then calculate the number of cavities according to the technical parameters of the injection molding machine and the technical requirements of the plastic parts; the other method is based on the requirements for production efficiency and the structure of the part require the number of cavities to be determined, and then choose the proper injection molding machine or check the existing injection molding machine.
We normally make the multi-cavity mold with 2 cavities, 4 cavities, 8 cavities, 16 cavities, 32 cavities, 48 cavities, etc. For family mold, we normally make at 1+1 cavities, 2+2 cavities, 4+4 cavities, 8+8 cavities, we can find the numbers are always double. Family mold help to molding different plastic parts in the same mould, this solution saves tooling and molding cost. For most family mold, the plastic part is in the same material & similar size, HanKing Mould will help customers to analyze the possibility to make the best economic plastic injection mould.
HanKing Mould Enginering Ltd. started the china custom plastic mold business in the year of 1996 as one of chinese plastic molding manufacturers in the line of plastic injection mold and precision molded plastics in Longgang, Shenzhen, China.
Persona a contactar : Yoyo Tang, 86 13798257041
Buen trato: comprar del vendedor
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de Family Mould Buscar en la categoria : Bienes de equipo Buscar en la categoria : mould, family |
Jueves 06 marzo 2025
Cantidad : 1000 - Precio : 2€
Société La société ARAM, est une société de production de jus de fruit (capacité 500litre/H). Produit: Jus d'orange bouteille 1litre, extrait de fruit pure Fruit cértifié Quantité: par lot Le lot varie entre 100litre à 1000litre selon votre commande Conditionnement en paket de...
ARAM SA
- 2029 - TUNIS
- 23874670
Domingo 25 noviembre 2012
Cantidad : 10 - Precio : 29,00 €
- Zuecos EVA células cerradas, libre de látex. - Lavable hasta 40ºC - Solo 95 grs. en cada pie - Anatómicos - Antideslizantes - Confortables - Antibacterianos - Silenciosos - Horma anatómica y ergonómica - Correa abatible y ajustable - Uni Ubicación : calle san cristobal nº 16, 6a27f...
Sábado 12 septiembre 2015
Cantidad : 32 tonnes - Precio : à soumettre
Bonjour, Nous venons de signer un contrat avec un de nos clients pour la livraison de journaux invendus en balles de 15 kg pour une durée de 6 mois. Les livraisons se feront 1 fois par semaine pour un volume de 30 à 32 tonnes, et ceci pendant 6 mois. Nous tenons également à préciser...
MOUCAWA GROUP
- 221 - Dakar
- 221 77 475 02 86
