Fiberglass mat

Introduction:

For fiberglass chopped strand mat, we have exported it to Poland, Italy, Belgium, UK, USA, South Africa, Rwanda, UAE, SA, Ecuador, etc since 2001. The widths of product are 0.1m, 0.2m, 0.25m or 0.3m X C, like tape mat and normal width is 1.04m, 1.25m, 1.27m, 1.86m, 2.6m, 3.2m or 3.6m x 30kg, 35kg or 80kg/roll. Packing can be plastic bag inside and carton outside or carton and pallet. Our chopped strand mat is made of mat roving in 50mm length by adding “KAO” brand powder binder from Japan or emulsion binder made in China. The finished product has good dispersion, no feather and proper hardness

Features and Advantage

1. Quickly wet out, good molding property, easy to delete air bubbles.

2. Evenly distribution of fiber and binder.

3. The composite products have high dry and wet tensile strength and good transparency.

4. Uniform density ensure consistent fiberglass content and mechanical properties of the composite product.

5. easy impregnation

Storage:

Fiberglass chopped strand mat should be stocked In dry and cool places. The best condition is with temperature between 15 and 35 centigrade, with a relative humidity between 30% and 70%. Before use, please keep it in the original package.

Looking forward to receiving your specific enquiries soon

Products application:

Chopped strand mat is used primarily for hand lay-up process,filament winding and press molding of FRP PRODUCTS. The end products are laminates,boats,complete set of bathing equipment, automotive parts and cooling tower, ect.