Flap turnstile
Specifications:
1. Power Supply: AC220V±10V ,50Hz / AC110V±10V ,60Hz
2. Power Consumption: 100W/24V
3. Temperature: -15 to 60 degrees
4. Humidity: <95%, without concretion</span>
5. Passage Width: 550-600mm
6. Passing Speed: 30 persons/min (normal open), 20 persons/min (normal close)
7. Arm Open/Close Time: 1s
8. Input Interface: +12V electrical signal or impulse signal with width more than 100ms, drive current >10mA
9. Communication Interface: RS485 (Distance: <=1200m)</span>
10. Material: Housing - 304 stainless steel
Arm - Plexiglass
11. Dimension: 1200*350*1500mm
Arm Length: 260mm
12. Weight: 90kgs
13. Working Environment: Indoors or outdoors with shed
14. Arm Turning: Single direction or Bi-direction
Functions and Features:
1. Problem-self-checking function.
2. Many options of working ways: bi-direction card reading; one direction card reading and another no reading; one direction card reading and another freely. And single direction photocell controlled passing and close. Working ways can be set in the control panel.
3. When power off, arm open automatically and power on again, arm will be held automatically.
4. When valid card read and passenger passed, arm can be delayed to close from 1-60s which can be set in the control panel.
5. Auto-reposition function: After card read, passenger not pass within regulated time period, full-height turnstile will cancel this passing right. And the regulated time period for passing can be set by managers.
6. If passenger pass without card read or valid card read, flap barrier will alarm untill passenger get back from the flap barrier and then take a valid card to be read for passing.
7. Flap barrier is with 485 interface for long-distrance control concern.
8. Anti-rush function: if there is no open single, arm will be holding tightly.
9. Double anti-clipping function: photocell anti-clipping and mechanical anti-clipping.When passenger is going through the flap barrier, photocell will detect out this situation and will not close. After passenger passed, arm will close automatically. During its reposition, if arm meets any obstacle, arm will get back automatcially or stop working for a while with very slight force. Also it will alarm.
10. Flap barrier is with standard electrical interface for the integration of various readers and writers.
11. Flap barrier can count how many passenger has passed and will show it in the LED display.
12. Direction display to guide passenger which direction is to go.
13. Card-reading with memory or without memory function.
14. Flap barrier can control the population inside in the control of software.
15. Stable running with little noise.
Persona a contactar : stephen chow, +86 755 8939 8806
Buen trato: comprar del vendedor
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de Flap turnstile Buscar en la categoria : Bienes de equipo Buscar en la categoria : flap, turnstile |
Martes 11 febrero 2025
Cantidad : 100 - Precio : 650,00 €
KM1024LNBThe Konica Minolta KM1024 LN print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads KM1024LNB 42PL The Konica...
Printpartin
- 90125 - Makassar
- +62 4 11 43 75 03
Martes 26 septiembre 2023
Explorer series Outdoor MPPT 48v 60a solar charge controller System voltage: 12V/24V/36V/48V (AUTO) Charge current: 50A;60A Max PV input: 150V Maximum solar panel power: 650W-3120W Protection level: IP65 Support parallel charging Support remote control&monitor (PC software and...)
Shenzhen Ipandee New Energy Technology Co., Ltd.
- 518112 - Shenzhen
- 0755 23091101
Jueves 06 mayo 2021
Tronzadora doble para marcos Brevetti Motta Dimencion max. de corte 40 mm en anchura – 80 mm en altura Tipo : electro-neumatica Voltaje: 400V 50Hz - trifase • 2 hokas HM d. 300 mm • 2 barras de apoyo • Filtro arie • Control independente movimiento hojas • Corte de 45° • Movimiento...
DUMBO SRL
- 52011 - Bibbiena
- 00390575536588
- +393355321306
