Bienes de equipo

Hard Gold PCB

Precio : 30-210 USD

Hard Gold PCB, immersion gold pcb, is to immerse the board in the plating tank and apply current to form a nickel-gold coating on the copper foil surface of the board. The electro-nickel gold is characterized by high hardness, wear resistance and oxidation resistance. Widely used in applications.

Introduction to Hard Gold PCB Technology:

1. Purpose and role: gold as a precious metal, has good weldability, oxidation resistance, corrosion resistance, small contact resistance, good wear resistance of the alloy and so on;

2. At present, the electroplating gold of the circuit board is mainly a citrate gold bath, which is widely used for its simple maintenance and simple and convenient operation;

3. Water gold content is controlled at about 1 gram / liter, PH value of about 4.5, temperature of 35 degrees, specific gravity of about 14 waves, current density of about 1ASD;

4. The main added drugs are acid-adjusted salt and basic-adjusted salt for adjusting pH value, conductive salt and gold-plated supplement additive for adjusting specific gravity, and gold salt;

5. In order to protect the gold cylinder, a citric acid dip tank should be added in front of the gold cylinder to effectively reduce the pollution of the gold cylinder and maintain the stability of the gold cylinder;

6. After the gold plate is electroplated, a pure water wash is used as the recovery water wash. At the same time, it can also be used to supplement the liquid level of the gold cylinder evaporation change. After the water is washed, it is connected with the second-stage counter current pure water wash. After the gold plate is washed, the alkali liquid is put into 10 g/shdter. To prevent oxidation of the gold plate;

7. Gold cylinder should use platinized titanium mesh as anode, generally stainless steel 316 is easy to dissolve, resulting in nickel-iron-chromium and other metal pollution gold cylinder, causing plating white, exposed plating, blackening and other defects;

8. Gold cylinder organic pollution application of carbon core continuous filtration, and supplemented with appropriate amount of gold plating additives.

What is Immersion Gold Plating:

Everyone chooses immersion gold plating, then what is immersion PCB gold plated circuit board, we say the whole plate gold plating, generally refers to "electroplating gold", "electroplated nickel gold plate", "electrolytic gold", "electric gold", "electric nickel plate", soft gold and the distinction between hard gold (usually hard gold is used for gold fingers), the principle is to dissolve nickel and gold (commonly known as gold salt) in chemical potion, dipping the board in the plating tank and turning on the current on the PCB. A nickel-gold plating layer is formed on the surface of the copper foil, and the nickel-gold alloy is widely used in electronic products because of its high hardness, wear resistance, and oxidation resistance.

Electric gold standard: nickel thickness 3-5um; gold thickness 0.25-1.5um; gold thickness minimum 3U''.

The Application of Hard Gold PCB

Hard Gold PCB is widely used in intelligent AI, entertainment, educational robots or other industrial intelligent equipment to expand and contract, rich in change action, frequent separation and contact of local ports of the device, which requires good wear resistance of the PCB at the contact area of the port. ual and not easily oxidized.

Welcome to custom Hard Gold Plating PCB directly from Shenzhen PCB Manufacturer at low cost. And welcome to custom pcb fabrication from PCB MANUFACTURER CHINA.

Ubicación : Building 1, Huaide Cuigang Industrial Zone 3, Fuyong Street, Baoan District , Shenzhen, Guangdong 518103, China , 518103 Fuyong Street,
Persona a contactar : Mo Jack, +15 9 76 88 36 32

Buen trato: comprar del vendedor

Visita nuestra guía para una transacción segura! En ningún caso Algomtl no se hace responsable de los anuncios. Sólo la responsabilidad del vendedor o del comprador en caso de litigio está involucrado.
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de
Hard Gold PCB

Buscar en la categoria : Bienes de equipo
Buscar en la categoria :
gold, hard
Turquía 06370 Alimentación
Máquina del cubo de azúcar

Domingo 15 marzo 2015

TAYSAN MAKINA CO. SARL. Es una empresa que hace que la producción de tipos de máquinas totalmente automáticas y manuales de R para la fabricación de azúcar duro en cubos de Turquía y también máquinas para envasado de alimentos diversos y terrones de azúcar desde diez años de experiencia...

Taysan Makina Ltd

  • taysanmakina
  • 06370 - Ankara
  • 0090 312 396 01 09
  • 0090 546 610 06 05
Taiwán 428 B2B Servicios
Focus CNC Co., Ltd.

Miércoles 13 enero 2016

Established in 2000, Focus CNC Co., Ltd. provides series of CNC Lathe Machinery, CNC Lathe, live tool CNC Lathe, mill turn Lathe and CNC turning machine. Due to our principle of “Humanity, Technology and Precision” in mind, we keep breaking through to become one leading Industry...

Focus CNC Co., Ltd.

Turquía 34510 Materias primeras
Foto no disponible

Jueves 16 junio 2016

Properties Made of polyester film of 12 microns. Metallic gloss, soft gloss and matte effects, gives the different reflections. “Release resistance” of foils to be sold are “moderate” level. resistance of so-called “moderate” level. In this way, the “silver dust” problem is reduced...