High-Low Temp. Test Chamber
Cantidad : 100 Precio : USD2000-5000
Performance characteristics of low temperature test chamber:
1. In the refrigeration system, the condensation adopts air cooling mode, which has a wide temperature control range, which can meet the user's various needs.
2. With a unique balanced temperature control method, with stable and balanced heating capacity, high precision and high stable temperature control can be carried out;The temperature is displayed by touch screen, easy to read, precise and convenient.
3. Adjust the temperature error value to meet more accurate test conditions.With the setting of temperature, it is easy to operate the refrigeration circuit.
4. The box door is equipped with a large observation window, which can observe the test status of the test sample at any time.
5. with functions of high temperature on, can open the refrigerator when the temperature in the oven to 150 ℃, facilitate continuous round-trip experiment was carried out between the high temperature and low temperature.
6. Self-diagnosis function, overload protection of refrigerator, high pressure switch, overload relay, thermal protection device, etc., to ensure the safety of use.
7. Use the multi-wing fan to supply the wind with strong air circulation and avoid any dead Angle, so that the temperature can be evenly distributed in the test area.
8. Wind circulation is designed with wind return wind. The wind pressure and wind speed are in accordance with the test standard.
9. Temperature rise, cooling and system complete independence can improve efficiency, reduce test cost, increase life span and reduce failure rate.
Technical Parameters:
Model |
GD-4525 |
GD-4550 |
GD-45A0 |
GD-7525 |
GD-7550 |
GD-75A0 |
cubage |
220L |
500L |
1000L |
220L |
500L |
1000L |
Temp. range |
-45℃~+150℃ |
|
|
-75℃~+150℃ |
||
Temp. accuracy |
±0.5℃ |
±0.5℃ |
±0.5℃ |
±0.5℃ |
±0.5℃ |
±0.5℃ |
Temperature uniformity |
≤2℃ |
|||||
Heating rate |
2.8℃/min |
|||||
Cooling rate |
2.5℃/min |
|||||
Heating power |
2KW |
3.5KW |
5KW |
2KW |
3.5KW |
5.5KW |
|
Nickel-chromium alloy electric heater, control itself has 2 protections, add independent </ span> |
|||||
Controller |
LNEYA PLC AndModules |
|||||
Program editor |
Can edit 15 programs, each program can be programmed 45 steps. |
|||||
Touch screen |
LNEYA 7 inch color touch screen |
|||||
Data record |
Temperature curve record (can be exported to EXECL format by U disk), alarm information rec ord. |
|||||
Communication |
RS485 interface Modbus RTU protocol |
|||||
Compressor |
Emerson Copeland Scroll Flexible Compressor |
France Taikang/ItalyDorin Compressor |
||||
Drying filter |
Danfoss/Emerson. |
|||||
Oil separator |
Emerson |
|||||
expansion valve |
Danfoss thermal expansion valve. |
Danfoss thermal expansion valve |
||||
Refrigerant |
R404A |
R404A+R23 Mixed refrigerant |
||||
High temperature cooling |
Can satisfy 150 degree direct start compressor cooling. |
|||||
Sight window |
200×300 |
200×300 |
300×400 |
200×300 |
200×300 |
300×400 |
Instrument connection |
Leftφ50 |
Leftφ50 |
Lefφ100 |
Leftφ50 |
Leftφ50 |
Leftφ100 |
Heat preservation |
Polyurethane foam + ultra fine glass fiber. |
|||||
Liner material |
SUS304 Stainless steel plate |
|||||
Shell material |
Cold rolled plate spray |
|||||
Inner dimension mm |
650*600*760 |
800*735*800 |
1000*1000*1000 |
600*650*760 |
800*735*800 |
1000*1000*1000 |
Dimensions mm |
950×1100×1860 |
1100×1250×1900 |
1300×1500×2150 |
950×1100×1860 |
1100×1250×1900 |
1300×1500×2150 |
Weight |
280kg |
390kg |
620kg |
320kg |
420kg |
680kg |
Power380V |
3.8kw |
6.5kw |
9.5kw |
5kw |
8.5kw |
12kw |
Standard Accessorias |
1 copy of product specification, 2 pieces of test stand, 1 piece of silicone rubber.; |
|||||
Optional |
220V 60HZ three-phase, 460V 60HZ three-phase |
|||||
Optional |
Optional: wider range of temperature, minimum temperature to -150 degrees, maximum |
|||||
Optional |
Optional cooling method for water cooling (low noise, good cooling effect) |
|||||
Optional |
Explosion-proof type is optional. |
Contact LNEYA for more dynamic temperature control equipments.
Persona a contactar : Tony Tony, 0510 82303782
Buen trato: comprar del vendedor
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de High-Low Temp. Test Chamber Buscar en la categoria : Bienes de equipo Buscar en la categoria : temp, test, high, chamber |
Viernes 27 agosto 2010
Cantidad : by contain - Precio : various
We export various high quality Japanese food and beverages, from frozen vegetables, canned food, to gree tea, coffee, and sake. Please visit our website and we are very happy that we can offer various business chances to you.Ubicación : 1-6-8, Koyocho-naka, Higashinada-ku,, 658-0032 Kobe...
Crystal Group Co., Ltd.
- junkojat
- 658-0032 - Kobe, Hyogo
- +81 7 88 42 92 20
- 81 90 8750 1804
Martes 11 agosto 2015
Precio : 1$ ~30 $
One Lus International is a professional lock cylinder manufacturer in Taiwan and provides a series of lock cylinder to meet customer's needs. The pin tumbler cylinder is reliable manipulation and drilling protection by high quality locking system and patented special pins are with...
One Lus International Co., Ltd.
- onelusinter
- 833 - Kaohsiung City
- +88 6 77 32 85 66
Miércoles 16 enero 2013
Cantidad : 100 - Precio : USD5279
Engine Type 686cc liquid-cooled w/fan, 4-stroke; SOHC, 4 valves Bore x Stroke 102.0mm x 84.0mm Compression Ratio 9.2: 1 Fuel Delivery Yamaha Fuel Injection (YFI), 44mm Ignition 16-Bit ECU Starting System Electric Transmission 5-speed w/reverse; wet multiplate clutch Drive Train 2WD...
KRAMBA TRANSPORTATION
- 29431 - Batam
- 6285762075388