METAL FLANGING
Flanging refers to the stamping process of turning the edge or outer edge of the hole on the workpiece into an upright straight edge with a die. It is included in the forming process of stamping.
WHAT IS THE ADVANTAGE OF METAL FLANGING?
It can process precision stamping parts with complex shape and good rigidity.
Improve the production efficiency. Save dies for some deep drawing parts. Reduce the manufacturing cost.
It can replace the deep drawing work of a complex shape workpiece, so flanging is especially suitable for small batch trial production.
Flanging is usually applied at the edge of the stamping part, which can effectively save the material.
WHAT SHOULD BE CONCERNED IN METAL FLAGGING?
1. The flanging degree of inner hole of stamping parts shall not be too large at one time.
Flanging is a stamping method that turns the workpiece with holes punched in advance into vertical flange along the hole edge. The deformation of hole flanging is from the tensile deformation of the material along the tangential direction, and the closer to the edges, the greater the deformation and the flanged area of workpiece gets thinner. Due to that, the hole edge may be cracked if not dealt properly. In order to prevent the cracking, the flanging degree of the inner hole of the workpiece must not be too large. If the flanging height is large, we can process flanging several times instead.
2. The flanging coefficient of punching flanging shall not be too small.
In flanging, the deformation degree is expressed by cofficient "K", which is the ratio of the aperture before flanging to the aperture after flanging. Obviously, the larger the value of K, the smaller the degree of deformation. On contrary, the smaller the value of K, the greater the degree of deformation, and more likely the edge of the flanging hole will be broken. The minimum value of K occurs with the maximum deformation degree which can be achieved without cracking the hole edge.
In order to prevent edge cracking, K shall not be too small and shall be greater than the minimum value introduced above. Experience shows that the minimum value of K is not only related to the type and performance of the material, but also to the relative thickness of the blank, and the shape of the product.
As a metalworking factory, we can offer sorts of metal work fabrication for sale, if you are interested, please leave us a message.
Persona a contactar : com hunkmachining, 0553 2861635
Buen trato: comprar del vendedor
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de METAL FLANGING Buscar en la categoria : Mayoristas / proveedores Buscar en la categoria : flanging, metal |
Jueves 02 mayo 2024
Applications : CMX-12 is a high definition digital AV Mixer, which is a simple type of HD/SD Video Mixer Editor to switch and effects. Each input BUS supports 6 inputs (2 x HDMI, 2 x Component, 2 x S-Video and Composite video) and also Background Color for special effect. The output...
Meicheng Audio Video Co., Ltd.
- meicheng
- 23511 - New Taipei City
- 886 2 82280311
Sábado 11 mayo 2024
Cantidad : 100,000 pc
JBI is one of the leading professional screw suppliers in Taiwan and specialized in manufacturing screws, bolts, nuts, washers, fittings, springs, and other hardware. All our products are produced according to the IFI, DIN, ISO International standard specification. Our fasteners...
Jeng Bright International Corporation
- jbitwco
- 830 - Kaohsiung City
- +88 6 77 02 10 77
Martes 16 febrero 2016
Cantidad : 5000MT - Precio : 450 USD / MT CIF
Inhibit tumor growth and improve disease resistance; Powerful anti-oxidant which extends life, and improves the memory; Neutralize the side effects of chemotherapy and radiation; Normalize blood pressure & balance blood sugar Lower cholesterol, lose weight. Support eye health...
KHUN JACK PARTNERSHIP LIMITED
- 50000 - CHIANG MAI
- +66 9 56 19 49 81