Pad Printing Silicon Rubber

Pad Printing Silicon Rubber Usages:

Pad printing silicone rubber is mainly use for printing irregular patterns on plastic toys, shampoo, pen, glass, electroplating toys and trade makers and so on.

Pad Printing Silicon Rubber description:

Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.

Pad Printing Silicon Rubber Features:

1. high print times
2. abrasion resistance.
3. good printing effects
4. permanent and durable

Pad Printing Silicon Rubber Operation Instructions:
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.

Step Two: vacuum pumping

Without exception, this step takes less than 10 minutes.

Note: The time for vacuum-pumping should be less than 3 to 5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.

Step Three: Pouring the vacuumed mixture into the original mold slowly,

Shelf life for silicon rubber for mold making

8 to 10months, when stored in a dry & cool place under the room temperature 25.

Packing for silicon rubber for mold making

20kgs/drum vacuumed packing

For more information, pls feel free to contact Ms Kid

TEL: 0086-755-89948013

Mobile: 0086-18938867592

Skype: kidhere

Email: hyxx(at)szrl(dot)net

Welcome to our website www (dot) szrl (dot) net