PCD & PCBN
Cantidad : 8000kgs Precio : USD0.025 - USD1.05
PCD blank for Cutting Tools
E-Grind supplies the whole range of PCD blanks for cutting tool purpose. The largest Diameter available can be 55mm. Our PCD provides high wearing resistance ability and high finishing surface.
Our plant installs laser cutting machines and surface lapping and finishing machines to provide full service for PCD material. With advanced inspecting machines of SEM, C-SCAN, X-Ray Diffractometer etc. Our plant applies strict Quality Control process.
PCD application:
Non-ferrous metals and alloys: Aluminum/gray iron composite, copper, Aluminum...
nonmetallic materials: ceramics, plastic, rubber, chipboard...
PCBN
PCBN consists of CBN and Binder. It is produced in high pressure and high temperature. It has excellent performance in hardness, wearing resistance, thermal stability.
Application: for hard ferrous materials (hardened steel, cast iron, high-temperature alloy, HSS, Powder metallurgy metals, Ni-Cr alloy...
E-Grind provides two series of PCBN:
1)Solid CBN
2)CBN with Tungsten Carbide supporting.
Grade |
CBN grit(μm) |
CBN content (Vol%) |
Processing way |
Application |
B-C6Z1 PCBN-C6Z1 |
20, 30 |
95% |
Continuous cutting with large stock removal |
For Rough processing Grey Cast Iron, Chilled Cast Iron, Powder Sintered Alloy. |
B-C5Z0 PCBN-C5Z0 |
10, 15 |
90% |
Continuous cutting with large stock removal |
For Rough process and semi-finishing processing the wear resistant cast iron, nodular cast iron etc. |
B-C5Z2 PCBN-C5Z2 |
10, 15 |
90% |
Continuous cutting with large stock removal |
For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron a nd chilled steel with hardness HRC45-50. |
B-C4G0 |
3, 5 |
80% |
Continuous cutting with Medium stock removal |
For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron a nd chilled steel with hardness HRC45-50. |
B-C3G0 PCBN-C3G0 |
3, 5 |
70% |
Continuous cutting with small stock removal |
For finishing the chilled steel and high-temperature alloy with HRC45-55. |
B-C2G0 |
1, 3 |
60% |
Continuous cutting with small stock removal |
For finishing and super-finishing the chilled steel with HRC55-62 like bearing steel, tool steel , mold steel, gauge steel, and HSS. |
B-C1G1 PCBN-C1G1 |
1, 3 |
55% |
Slight non-continuous and continuous cutting with small stock removal |
For Finishing and super-finishing the chilled steel with HRC55-65, like bearing steel, tool stee l, mold steel, gauge steel, and HSS. |
E-Grind Abrasives is professional in diamond and CBN products with over 50 years experience. If you want to know more about the abrasive powder types, just contact us! We sincerely invite and welcome people from all around the world to invest and create more values together.
Persona a contactar : Liu Locke, 0371 68616868
Buen trato: comprar del vendedor
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de PCD & PCBN Buscar en la categoria : Bienes de equipo Buscar en la categoria : pcbn |
Viernes 10 mayo 2024
Cantidad : Customers - Precio : Negotiable
Los empujadores de cutícula y limpiadores están diseñados para empujar las cutículas lejos de las uñas y limpiar la superficie de la uña sin rayar ni dañar el cuticle.There son variedad de empujadores de cutícula y limpiadores para ambas manos y pies. Los empujadores de cutícula...
Aerona Beauty manufacturers of beauty care instruments
- aeronabeauty
- 51310 - Sialkot
- 923217106500
Miércoles 14 septiembre 2016
Cantidad : 5000 - Precio : 50,00 €
Y Type Strainer DIN Standard Y Type Strainer DIN Y Schmutzfänger DIN Y Filtro tipo DIN Y filtr DIN Standard Y type filter DIN Standardında Y-Tipi Pislik Tutucu Lọc Y chuẩn DIN ETM Code No. : ETM FIG.T.830,ETM FIG.T.831 This ETM Y type strainer can be used in Industry, Power stations...
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935
Domingo 17 marzo 2013
Cantidad : Par Contai - Precio : $ 30.000
Bonjour, On a producteur des ustensiles de cuisine en inox{304, 18chr/10nick} en Turquie depuis 40 ans et nos produits sont haute qualité. On fait specialement d'exportation. on travaille avec plusieurs pays. on produit des casseroles, poeles, marmites, autocuiseurs, cocotte minute...
PREMİER İKRA METAL
- 46010 - kahramanmaras
- 00905436487223