Pressure Relief(Sustaining) Valve

Basic information of Pressure Relief(Sustaining) Valve

This valve is opened to prevent the pipeline and equipment from being damaged due to overpressure when the pressure in the water supply pipeline exceeds the set pressure of pressure relief. The valve closes automatically when pressure drops to the set value. download Dof960 series of cases

Features of Pressure Sustaining Valve

1. Accurate Pressure Control

2. Fast Opening to Maintain Line Pressure

3. Slow Closing to Prevents Surges

4. Completely Automatic Operation

Principle of Pressure Relief(Sustaining) Valve

Inlet pressure water enters the lower cavity of the pilot valve diaphragm from the guide valve when the pressure in the pipeline exceeds the set pressure of the guide valve to make its pressure increase to open the guide valve, the main valve control room outwards drain under the effect of the inlet pressure water to open the main valve, it starts to discharge pressure. When the pressure in the pipeline drops to the set pressure, the pressure in the lower cavity of the guide valve diaphragm decreases, causing the guide valve closed. This results in increased water pressure from the guide pipe to the pilot valve, then to the main valve control room. The main valve plate closes and begins to hold pressure.

Installation and Commissioning of Pressure Relief(Sustaining) Valve

The pressure relief(sustaining) valve supports horizontal and vertical installation but should pay attention to the inlet and outlet direction of valve body water when installing. In general, one fire water supply system can only install one pressure relief valve. Within the operating pressure range of the spring specified in the nameplate, the opening pressure can be adjusted by rotating the adjusting screw to change the spring compression amount. For specific use, please consult ZECO Valve Group.

Product Scope, Standards & Materials of Pressure Relief(Sustaining) Valve

Size Range: 2"~24"

Pressure Rating: 10bar ~ 25bar

Face to Face Dimensions: AMSE B16.10, EN558-1

Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2

Coating: Fusion Bonded Epoxy Coating

Inspection and Test: ISO 5208 / EN 12226-2

Zhengfeng Valve Group Co., Ltd. is one of professional china gate valve suppliers. We provide Control Valve, Balancing Valve, water valve and so on. Want to know more? Please contact us.