B2B Servicios

PU Foam Silicone Stabilizer

Cantidad : 1000Kgs   Precio : USD1~2000/Kg

SiSiB develops and manufactures a full line of high-quality silicone oil surfactant for formulating polyurethane rigid foams, flexible foams, high resilience foams, shoe sole foams and one component foam.

SiSiB develops and manufactures a full line of high-quality silicone surfactants for polyurethane foam.

Our silicone oil surfactants products are used for a variety of polyurethane applications: rigid foams, flexible foams, high resilience foams, shoe sole foams, one component foam, etc.

SiSiB, a reliable silane manufacturer, is responsive and flexible in formulating and manufacturing to satisfy customers' unique requirements. Our extensive network of reactors allows us to support our customers from project inception, to scale-up, through commercial success.

SiSiB Silicone Surfactant for PU foams are grafted copolymers which consist of a polydimethylsiloxane backbone and polyethylene oxide-co-propylene oxide pendant groups. It is used as surfactants to stabilize the foam cells in the flexible polyurethane foaming process. It increases the compatibility of raw materials, decrease surface tension in polyurethane foam systems, improve emulsification and nucleation, prevent coalescence and stabilize cell membranes.

PU Foam Silicone Stabilizer Recommendations

ADDSiL™ 11030

ADDSiL™ 11030 surfactant is a non-hydrolysable silicone glycol copolymer for manufacturing of rigid polyurethane foams. It is designed for Pentane and HCFC-141b blown polyurethane foams, it provides good nucleation and excellent flow ability.

ADDSiL™ 11050

ADDSiL™ 11050 surfactant is a non-hydrolysable silicone glycol copolymer for manufacturing of rigid polyurethane foams. It is a general-purpose foam stabilizer used for the production of polyurethane rigid foam plastic, and it is used in both hydrocarbons (cyclopentane), HCFC 141b and high water content foaming system.

ADDSiL™ 11060

ADDSiL™ 11060 silicone surfactant is a non-hydrolysable polyether polydimethylsiloxane copolymer. It is mainly used for manufacturing polyester polyurethane and polyether polyurethane rigid foam plastic, and is a foam stabilizer for PIR foaming process.

ADDSiL™ 11080

ADDSiL™ 11080 silicone surfactant is a non-hydrolytic polyether polydimethylsiloxane copolymer. It is an excellent candidate to consider for both continuous and discontinuous applications. It is designed for HFC-365/227 and the mixture blown polyurethane foams; it provides low thermal conductivities.

ADDSiL™ 11090

ADDSiL™ 11090 silicone surfactant is a non-hydrolytic polyether polydimethylsiloxane copolymer. It is designed for HFC-245fa and the mixture blown polyurethane foams; it provides low thermal conductivities.

ADDSiL™ 11200

ADDSiL™ 11200 silicone surfactant is a non-hydrolytic polyether polydimethylsiloxane copolymer. It is designed for iso-cyclopentane blown polyurethane foams; it provides good nucleation and excellent flow ability.

ADDSiL™ 11210

ADDSiL™ 11210 silicone surfactant is a non-hydrolytic polyether polydimethylsiloxane copolymer with high activity. It is designed for HCFC-141b blown polyurethane foams, it provides ideal balance of processing and performance properties.

ADDSiL™ 11220

ADDSiL™ 11220 silicone surfactant is a non-hydrolytic polyether polydimethylsiloxane copolymer with high activity. It is designed for HCFC-141b and cyclopentane blown polyurethane foams; it provides strong nucleation and low thermal conductivity.

ADDSiL™ 11280

ADDSiL™ 11280 silicone surfactant is a non-hydrolytic polyether polydimethylsiloxane copolymer with high activity. It is designed for water and pentane blown polyurethane foams; it provides excellent emulsion stability and voids reduction.

ADDSiL™ 11300

ADDSiL™ 11300 silicone surfactant is a non-hydrolytic polyether polydimethylsiloxane copolymer. It is designed for pentane blown polyurethane foams. ADDSiL™ 11300 provides low thermal conductivities and it is an excellent candidate for insulating appliance and PIR/PUR formulations.

ADDSiL™ 11320

ADDSiL™ 11320 surfactant is a non-hydrolysable silicone glycol copolymer for manufacturing of rigid polyurethane foams. It is designed for HCFC-141b and Pentane blown polyurethane foams.

ADDSiL™ 11600

ADDSiL™ 11600 surfactant is a non-hydrolysable polyether polydimethylsiloxane copolymer. It is designed for polyurethane foaming system with HFCs/HFOs blowing agent. It is also suitable for some mixture blowing agents like LBA/CP.

ADDSiL™ 11630

ADDSiL™ 11630 surfactant is a non-hydrolysable polyether polydimethylsiloxane copolymer. It is designed for rigid polyurethane foaming system with blowing agents like 245 /Cyclopentane /LBA/Ecomate, as well as some mixture blown agents like LBA/CP.

ADDSiL™ 11720

ADDSiL™ 11720 surfactant is a non-hydrolytic, isocyanate-compatible foam stabilizer with high activity. It is a copolymer of polysiloxane and polyether which mainly used for the production of polyurethane rigid foam plastic.

ADDSiL™ 11800

ADDSiL™ 11800 silicone surfactant is an organosilicone copolymer designed for use in the manufacture of rigid polyurethane foams. It can provide very efficient emulsification in insulation foams, such as in refrigerators and cold storage applications.

ADDSiL™ 11820

ADDSiL™ 11820 surfactant is a non-hydrolysable polyether polydimethylsiloxane copolymer. It is designed for polyurethane foaming system with pentane blowing agent.

ADDSiL™ 12250

ADDSiL™ 12250 surfactant is a silicone stabilizer. It is designed for cold-cure flexible molded MDI and MDI/TDI polyurethane foams.

ADDSiL™ 12360

ADDSiL™ 12360 surfactant is a silicone stabilizer. It is designed for cold-cure flexible molded TDI polyurethane foams.

ADDSiL™ 12550

ADDSiL™ 12550 is a silicone surfactants. It is designed for high resilience slabstock foam. It is a versatile and reliable for all formulations predominantly based on TDI 70+.

ADDSiL™ 12560

ADDSiL™ 12560 is a moderately active silicone surfactant for regulation and stabilization of the cell structure in high resilience molded polyurethane foams based on based on TDI 50 ~ TDI 70.

ADDSiL™ 12850

ADDSiL™ 12850 surfactant is a silicone foam stabilizer. It is designed for cold-cure flexible molded MDI and MDI/TDI polyurethane foams.

ADDSiL™ 13288

ADDSiL™ 13288 is a silicone surfactant provide broad latitude in all grades of conventional flexible foams, including those of very low density where high loading with auxiliary blowing agents act to...

ADDSiL™ 13888

ADDSiL™ 13888 is a silicone surfactant for the production of flexible polyurethane slabstock. It was developed to assist foam producers who use a wide range of formulations and processing conditions,...

ADDSiL™ 13900

ADDSiL™ 13900 is a high efficient silicone surfactant for flexible polyether polyurethane foam.ADDSiL™ 13900 is designed for low and medium density (8-35 kg/m3) flexible slabstock box foam productio...

ADDSiL™ 13950

ADDSiL™ 13950 is a low to medium-efficiency, non-hydrolyzable silicone glycol copolymer designed for flexible polyether slabstock foam. It can provide superior flame retardant properties compared to other silicone surfactants.

ADDSiL™ 15193

ADDSiL™ 15193 is silicone surfactant for most conventional rigid polyurethane foam and shoe sole systems. It can provide excellent flame retardant properties in rigid foam applications and excellent cell structure in shoe sole applications.

ADDSiL™ 15200

ADDSiL™ 15200 a silicone surfactant for stabilizing microcellular foam. It is mainly used in medium and low density ester shoe soles. It provides better skin formation and less peeling, reduces pinholes and enhances mechanical properties.

ADDSiL™ 15293

ADDSiL™ 15293 is silicone surfactant for most conventional rigid polyurethane foam and shoe sole systems. It can provide excellent flame retardant properties in rigid foam applications and excellent cell structure in shoe sole applications.

ADDSiL™ 15300

ADDSiL™ 15300 a silicone surfactant for stabilizing microcellular foam. It is used in polyester and polyether based shoe sole material system in medium and low density to provide excellent dimensional stability and can be well used in medium and low density shoe sole, extremely improving synthetically performance.

Contact us for the information of silicone surfactant uses!

Ubicación : Room 703, Tower A, KangYuan ZhiHuiGang, No.50 Jialingjiang East Street, Nanjing, China, 210000 nanjing,
Persona a contactar : Amy Wu, 025 58599930

Buen trato: comprar del vendedor

Visita nuestra guía para una transacción segura! En ningún caso Algomtl no se hace responsable de los anuncios. Sólo la responsabilidad del vendedor o del comprador en caso de litigio está involucrado.
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de
PU Foam Silicone Stabilizer

Buscar en la categoria : B2B Servicios
Buscar en la categoria :
silicone, stabilizer, foam
Marruecos 13100 Materiales de ocasión
Camión Taladradora INGERSOLL RAND T4W

Domingo 02 diciembre 2012

Cantidad : 1 - Precio : 95 000,00 €

Vende camión sondea taladradora Ingersoll Rand T4W año 1978 con 215 m de tubos de acero 2 martillos sd6 y sd8 + 3 filos y todas las herramientas necesarias. Camión y Sonda / compresor totalmente reparado, bombas y circuito hidráulico así como bombea a grumete incluido, Facturas Atlas...

SIFED Sarl

  • 13100 - Bouznika
  • 00 212 678052146
China 452383 Bienes de equipo
2014 New type paper pulp machine/waste paper recycling machine/high density cleaner

Miércoles 26 febrero 2014

Cantidad : 500set/yea - Precio : FOB USD10000-50000

2014 New type paper pulp machine/waste paper recycling machine/high density cleaner Main characteristic Easy visual inspection of vortex through illuminated sight glass; Easy and simple to handle &maintain Working consistency is from 2%-5% High consistence, save energy and...

Zhengzhou Leizhan Technology Paper Machinery Co;.Ltd

  • 452383 - Dawei town,Xinmi city,Henan province
  • +86 0371 86138029
China 230601 Bienes de equipo
AT121 Series Ring Stiffness Tester

Jueves 01 septiembre 2016

AT121 Series Ring Stiffness Tester Description: AT121 Series Ring Stiffness Tester with larger test space is specifically designed for plastic pipe ring stiffness testing. Equipped with suitable test grips and fixtures, it can address the needs of standardized and routine testing...

Anytester (Hefei) Co., Ltd.

  • 230601 - Hefei City
  • +86 186 18655041869