PVC Three-Laver Synthetic Resin Tile Production Line

The structure and working principle of Three-layer synthetic resin

The unit is composed of frame parts, traction and forming machine, automatic cutting machine, discharge shelf, electrical control box and others.

Characteristics of Three-Laver Synthetic PVC Resin Tile Production Line

Volume stability-the expansion factor of synthetic resin tile is 49310-5mm / mm / C , and the waveform has bi-directional tensile property geometrically, even the temperature changes too much , the expansion of the tile can also be digested by itself , to ensure the size no change, strong fire resistance-the main material of synthetic resin tile is PVC , belongs to non-flammable , through the state fire department testing fire performance Insulation - The synthetic resin tile is insulating material , it will be intact even accidental discharge lightweight - The synthetic resin tile belongs to light structure material , weight ( 5.6 + 0.2 ) Kg / 0Clean and saving-the synthetic resin tile itself is smooth and compact , which is not easy to absorb dust .o . . Easy installation-the synthetic resin tile is lightweight and various accessories, so it easy to loading and unloading : in addition , the effective width of synthetic in tile is 960mm , the efficiency is higher than width 720mm synthetic resin tile , can save more cost.

Performance & Advantages of PVC Three-Laver Synthetic Resin Tile Production Line

1. Frame parts:

It has a reasonable structure, strong bearing capacity and good rigidity. It is used for carrying and fixing all the mechanisms A pneumatic control box is installed on the rack of the fixing tractor and cutting machine to control various actions in the production process

2. Cooling, forming and hauling off unit: To produce the important parts of corrugated product:

The mechanism consists of a pair of corrugated upper and lower formwork to form the shape of the product. The upper and lower form-work is provided with an air cooling system. By cooling the formed products, the formed waveform is no longer deformed due to high temperature. The opening and closing of the upper template is accomplished by a pair of lifting cylinders fastening the lower template Operate the manual control valve of traction lifting to make the upper plate open and close freely There are adjustment bolts at the bottom of the lower plate , and the height of the lower plate can be adjusted according to the process needs to ensure the required center height for normal production traction mechanism : to obtain the normal production tension required to synchronize the extrusion speed with the traction speed The mechanism adopts advanced frequency control technology and chain sprocket and gear rotating system Adopting step-less speed regulation , it has the advantages of wide speed regulation range , stable and reliable transmission and strong overload capacity The working process is : three-phase ac motor , which is transmitted to two-stage cycloid pin-wheel reducer after adjusting speed by frequency converter ,d then to upper and lower traction templates through a pair of double-row sprocket wheels.

3. Automatic cutting machine:

To finish the cutting of product based on any length, to make the products leave the cutting machine, to ensure next cutting successfully. The mechanism has the advantages of accurate length, smooth cut and timely feeding The concrete consists of sliding shear table.

The Kailite main products include plastic machinery series: extruder, plastic pipe production line, plastic sheet/sheet equipment, plastic profile production line, wood-plastic equipment, plastic recycling granulator, plastic crusher, etc.