RAIZI STCD Sharpro3-3007 Concrete Floor Ceramic Transitional Granding/ Polishing/sandin...

Item No.: STCD-Sharpro 3-3007

Sharpro™ Transitional Ceramic polishing pads for concrete (Lavina)
Sharpro™ transitional Ceramic diamond polishing pads are our newly developed ceramic bond diamond polishing pads.
Recommended operating speed is 5 – 7 on a scale of 1 -10 for Grinder.

Sharpro™ Concrete Transitional Polishing pad

SharproTM hybrid-bond "ceramic" concrete floor polishing pad is an excellent transitional tool between metals and resins. Designed for hard concrete only, this special concrete floor polishing pad is highly good at removing scratches and may even allow operators to skip some initial resin polishing steps. Sharpro TM diamond polishing pads are Velcro backed, It cannot be used on soft concrete.

Grit 30= Extra Coarse

Grit 50= Coarse

Grit 100= Medium

Grit 200= Fine

The SharproTM concrete floor polishing pads are originally designed for cutting or grinding a bad polish job off and leaving the floor without ugly scratches that damaged the original polishing project.

The SharproTM concrete floor polishing pads grits available: 30, 50, 100 and 200. Most begin with 50 grit SharproTM. Remember that SharproTM pads are also designed to follow the contours of your concrete surface so they will not level a floor. They are designed to provide an even and consistent first cut and now we also use as the transition between Metal Bond and Resin polishing.

SharproTM concrete floor polishing pads work well wet.

How to guides

Process 1 (if aggregate must be exposed)

30 Grit Metal

50 grit SharproTM Transitional Ceramic polishing pads

100 grit SharproTM Transitional Ceramic polishing pads

Densifier

400 grit SharproTM Transitional Ceramic polishing pads

800 grit Resin

1500 grit resin

Process 2 (if “salt and pepper” must be exposed)

60/80 Grit Metal

100 grit SharproTM Transitional Ceramic polishing pads Densifier

400 grit SharproTM Transitional Ceramic polishing pads