Safety Precautions Of Using Bottle-Top Dispenser
The bottle-top dispenser is intended to be used as a general lab tool mostly in the petrochemical and biological industry. Certain safety precautions have to be observed to prevent personal injury and property damage.
Proper Operation
Before using a bottle-top dispenser, it must be ensured that the inlet valves and outlet tubes and all the other valves are properly installed and tightened. During the operation, the outlet tubes should always be avoided facing the operator directly. If there is any error occurs, remember to stop immediately instead of the violent operation. In this way, further damage to the instrument can be avoided. After the operation, it is necessary to fasten the caps of the outlet tubes, which ensures no solutions dripped out from it if any left in the tubes.
Maintenance
To guarantee its excellent performance, the bottle-top dispenser should be cleaned regularly and perform the periodical inspections. If the solutions get stuck on the valves, the first thing needs to be done is to soak it in the cold water or clean it with the ultrasonic washing instrument. If repair is required, consult to the dealer or manufacturer of the bottle-top dispenser.
Disposal precautions
To dispose of the bottle-top dispenser as industrial waste in conformance with the Factory Instructions or Specification.
Persona a contactar : Bruce Lu, +86 29 89284429
Buen trato: comprar del vendedor
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
|
Esta página es acerca de los importadores y exportadores de Safety Precautions Of Using Bottle-Top Dispenser Buscar en la categoria : Varios / Descuento Buscar en la categoria : using, safety, precautions, bottle, dispenser |
Wednesday 14 September 2016
Cantidad : 5000 - Precio : 50,00 €
Y Type Strainer DIN Standard Y Type Strainer DIN Y Schmutzfänger DIN Y Filtro tipo DIN Y filtr DIN Standard Y type filter DIN Standardında Y-Tipi Pislik Tutucu Lọc Y chuẩn DIN ETM Code No. : ETM FIG.T.830,ETM FIG.T.831 This ETM Y type strainer can be used in Industry, Power stations...
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935
Tuesday 17 March 2026
▲VE-30RFM RX (Front / Rear) ▲VE-30RFM TX (Front / Rear) VE-30RFM HDMI to RF Matrix Extender is designed to convert HDMI signal to HD digital TV signal based on DVB-T CATV signal, it uses 64QAM mode to realize the HD digital TV signal conversion and transmit via coaxial cables for...
Meicheng Audio Video Co., Ltd.
- meicheng
- 23511 - New Taipei City
- 886 2 82280311
Tuesday 17 March 2026
Cantidad : 1000 - Precio : 5,00 €
♦ Functions * 1-channel temperature monitor * 2-channel fan speed control * 6-level fan speed control (manual) * Fan speed storage function * Auto fan speed control → 40°C: Low 50°C: Middle 60°C: High * Immediate visual indication of Fan/HDD operation * Displays system...
Tengda Electronics Limited
- simeongao
- 518102 - hongkong
- +85 2 21 10 18 65



