Salt Spray Test Chamber
Precio : 1,00 €
Basic Info.
Model NO.
YWX/Q-010
After-sales Service
Perfect
Certification
CE
Warranty
2 Years
Trademark
LISUN
Origin
China
Product Description
Salt Spray Test Chamber | Salt Fog Test | ASTM B117 Salt Spray ChamberSalt Spray Test Chamber is applicable to the salt spray corrosive test for the protection layer of components, parts, electronic and electrical parts and metal materials and industrial products. The salt fog test chamber meets the following standards: IEC60068-2-11 (GB/T2423.17), GB/T10125, GB/T1771, ISO9227, ASTM-B117, GB/T2423-18, QBT3826, QBT3827, IEC 60068-2-52, ASTM-B368, MIL-STD-202, EIA-364-26, GJB150, DIN50021-75, ISO3768, 3769, 3770; CNS 3627, 3885, 4159, 7669 etc.
Model | Work Room Size (mm) | Exterior Size (mm) | Voltage | Power (KW) |
YWX/Q-150 | 600x450x400 | 1100x750x930 | 1Phase/220V | 2 |
YWX/Q-250 | 900x600x500 | 1500x900x1150 | 1Phase/220V | 2.5 |
YWX/Q-750 | 1100x750x500 | 1700x1050x1150 | 1Phase/220V | 3.5 |
YWX/Q-010 | 1200x800x500 | 1800x1100x1200 | 1Phase/220V | 3.5 |
YWX/Q-016 | 1600x1000x600 | 2300x1300x1300 | 1Phase/220V | 5 |
YWX/Q-020 | 2000x1000x600 | 2700x1400x1500 | 3Phase/380V | 7.5 |
Specifications:
• A waterproof structure is adopted between the chamber cover and chamber body, thus there is no salt spray overflow.
• Adopts the tower spraying system and equipped with the salt solution filter system and non-crystal nozzle so as to realize even salt spray distribution and freely adjustable settlement.
• The Salt Spray Chamber Working room temperature range: RT+5ºC~50ºC (The setting value cannot be lower than the current ambient temperature); Saturated barrel temperature: +40°C~+63°C;
• Brine temperature: preheated by laboratory temperature; Temperature uniformity: ≤ ±2°C; Temperature fluctuation: ≤ ±1°C;
• The Salt Spray Test time: 0-99,999m (adjustable); Settlement: 1-2ml/80cm²/h;
• The Salt Spray Test Chamber Spray method: NSS (neutral) test, AASS (acidic) test, CASS (copper acceleration) test, custom test, programmable test, each test can choose continuous spray or intermittent spray (according to industry standards). The ratio of each test solution has a corresponding explanation in the test setting interface.
• Sample holder: at an angle of 15 to 30 degrees from the vertical surface (with sample standard placed). Other irregular samples are recommended to remain tilted. The V-groove has a single weighing capacity of 3KG, and the O-bar has a single bearing capacity of 5KG. It is strictly forbidden to place samples under heavy weight.
How do you do a salt spray test?
1. First power on the salt spray test chamber (plug in)
2. Press the red power switch panel from left to right, respectively: the low water level A light is on, the low salt water B light is on, and the low water level C light is on.
3. Pour distilled water directly into the test chamber, wait until the water level A indicator light off, and stop adding water. […more…]
How Long does a Salt Spray Test Take?
The Salt Spray Test Chamber is an environmental test equipment that evaluates the corrosion resistance of products or metal materials by artificially simulating salt spray environmental conditions. The chloride concentration in the salt spray environment can be several or tens of times the salt spray content of the general natural environment, which greatly increases the corrosion rate. The salt spray testing of the product can greatly shorten the time to obtain the result. For example, if a product is tested in a natural exposure environment, it may take 1 year for its corrosion, while a test in salt spray test chamber may take as long as 24 hours to obtain similar results.
How to use a salt spray test chamber to determine the corrosion resistance of LED lamps?
Salt spray test is a kind of environmental reliability test, mainly used to test the corrosion resistance of metal materials of lamps. In order to verify whether the metal parts on the product will corrode when exposed to the atmosphere or other environments, the product can be placed in the use environment for a long enough time, such as a product life cycle. This is time-consuming and labor-intensive. In practice, it is rarely used, so a convenient method is needed to evaluate the corrosion resistance of the product.
Persona a contactar : Rachel He, 860015317383997
Buen trato: comprar del vendedor
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de Salt Spray Test Chamber Buscar en la categoria : Informática Buscar en la categoria : salt, test, spray, chamber |
Domingo 15 marzo 2015
TAYSAN MAKINA CO. SARL. Es una empresa que hace que la producción de tipos de máquinas totalmente automáticas y manuales de R para la fabricación de azúcar duro en cubos de Turquía y también máquinas para envasado de alimentos diversos y terrones de azúcar desde diez años de experiencia...
Taysan Makina Ltd
- taysanmakina
- 06370 - Ankara
- 0090 312 396 01 09
- 0090 546 610 06 05
Sábado 18 abril 2015
Cantidad : 100000 - Precio : 200 per pallet
Bebida energética energía de caballo Con muchos de los productos de hoy (cuyo rendimiento es poco más que unareclamación basada en bombo) dejando los consumidores se siente engañado, es elsímbolo del caballo ha representado poder y la fuerza del mundo durante siglos yproporciona...
Beverages Supplies Inc
- 00237 - Limbe
- +237661757711
Viernes 15 noviembre 2024
Cantidad : 99999 - Precio : 1,00 €
Argile Rouge ARGANisme L'argile rouge est riche en fer et en oligo-éléments. De quoi favoriser la circulation sanguine et redonner de la luminosité à la peau. Elle nettoie et purifie également la peau en la débarrassant de ses impuretés. Idéale pour les peaux ternes ou sèches En...
ets-lachgar
- etslachgar
- 400000 - Marrakech
- +21 2 24 43 68 94
- +21 2 61 64 43 09