Bienes de equipo

SDS-05030 0.50mm Diameter 30mm Length Glued Steel Fiber

Cantidad : 2000 tons   Precio : USD 0.8-1.3/kg

This kind of steel fiber is made of high-speed wire, when you add it to concrete, which can improve the toughness, bending and tensile strength, shear strength, shock resistance, cracking resistance, and permeability of concrete. Thus, steel fiber concrete is essentially different from ordinary concrete. Welcome to contact us for steel fiber density and other information about this kind of steel fiber.

The Specification of SDS-05030 0.50mm Diameter 30mm Length Glued Hooked End Steel Fiber

Name

SD-05030

Type

Glued

Diameter

0.50mm

Length

30mm

L/D(length/diameter)

60

Tensile strength

>1150Mpa

Application

shotcrete

The Advantages of SDS-05030 0.50mm Diameter 30mm Length Glued Hooked End Steel Fiber

Under the same strength, the amount of concrete can be reduced;

Replace or partially replace the reinforcement;

The glued steel fiber can shorten the construction period, especially suitable for larger projects requiring continuous and rapid concrete pouring;

Compared with ordinary concrete, the same mixing and construction do not need to add new equipment.

USER'S GUIDANCE

Dosage: depending on the application and the minimum dosage is 20kg/㎥-70kg/㎥

Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it on a mixing table, dry, and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.

Put the uniformly mixed fiber concrete into the conveyor and transport.

Concrete pouring and laying should be compacted.

The Safety & Packaging of SDS-05030 0.50mm Diameter 30mm Length Hooked End Steel Fiber

Star Smith is one of professional concrete fiber manufacturers that can offer a wide range of hooked end steel fiber that meets different needs.

Packaging: 20kg or 25kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet,24tons per 20'container.

And the pallets should be waterproof, don't stack pallets on top of each other.

Gloves and eye protection should be used when adding the steel fibers.

Ubicación : NO.397 Shunhe Road,Tengzhou Economic Development Zone,Shandong Province,China., 277500 Tengzhou,
Persona a contactar : fiber cnsteel, 0632 5236036

Buen trato: comprar del vendedor

Visita nuestra guía para una transacción segura! En ningún caso Algomtl no se hace responsable de los anuncios. Sólo la responsabilidad del vendedor o del comprador en caso de litigio está involucrado.
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de
SDS-05030 0.50mm Diameter 30mm Length Glued Steel Fiber

Buscar en la categoria : Bienes de equipo
Buscar en la categoria :
50mm, 30mm, steel, length, glued, diameter, fiber
Marruecos 13100 Materiales de ocasión
Camión Taladradora INGERSOLL RAND T4W

Sunday 02 December 2012

Cantidad : 1 - Precio : 95 000,00 €

Vende camión sondea taladradora Ingersoll Rand T4W año 1978 con 215 m de tubos de acero 2 martillos sd6 y sd8 + 3 filos y todas las herramientas necesarias. Camión y Sonda / compresor totalmente reparado, bombas y circuito hidráulico así como bombea a grumete incluido, Facturas Atlas...

SIFED Sarl

  • 13100 - Bouznika
  • 00 212 678052146
Turquía 38070 Varios / Descuento
Portes blindees avec des bonne prix

Tuesday 14 April 2026

Cantidad : 100 - Precio : 400 $

Nous aimerions saisir cette occasion pour vous présenter notre entreprise. Nous sommes l'un des principaux exportateurs de produits Portes blindées , Portes de sécurité , Portes d'entrée a la chambre en bois , Coupe-feu en provenance de Turquie. vous pouvez obtenir de plus amples...

Lconkal Export

Francia 361002 Materiales de ocasión
CNC de mecanizado de Parte

Friday 16 May 2014

Cantidad : 5000000 - Precio : $0.50-5/pc

Perfil De La Empresa: Totalmente equipado con avanzados cnc maquinaria, tenemos experiencias ricas para precisión fabricación piezas mecanizadas, piezas torneadas, piezas de fresado como por los dibujos para ofrecer la parte superior- muesca productos. Nuestras instalaciones de...

Xiamen Karo Co.,Ltd