SDS-07535 0.75mm Diameter 35mm Length Hooked End Steel Fiber

This fiber is a high-performance steel fiber. Because of its high tensile strength, good toughness, and low price, it is often used as a substitute for glued steel fibers. It can be widely used on roads, highways, curbs, factory floors, airport runways and etc.

The Specification of SDS-07535 0.75mm Diameter 35mm Length Hooked End

The Advantages of SDS-07535 0.75mm Diameter SDS 35mm Length Hooked End Steel Fiber

Under the same strength, the amount of concrete can be reduced;

Product life is prolonged;

High comprehensive;

Reduce steel reinforcement requirements;

Hooked steel fiber can reduce crack widths and control the crack widths tightly, and also improving durability.

USER'S GUIDANCE

Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it in a mixing table, dry and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.

Put the uniformly mixed fiber concrete into the conveyor and transport.

Concrete pouring and laying should be compacted.

The Safety & Packaging of SDS-07535 0.75mm Diameter 35mm Length Hooked End Steel Fiber

Star Smith is a professional steel fiber reinforced concrete supplier that can offer a wide range of steel fibre types that meets different needs.

Packaging: 20kg or 25kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet, 24tons per 20'container.

And the pallets should be waterproof, don't stack pallets on top of each other.

Gloves and eye protection should be used when adding the steel fibers.