China Vehiculos
Vehiculos

Semi Tipper Trailer buying guide: How to Choose the Right Specs

Cantidad : 1   Precio : 15000~26000$

Due to different work requirements and different work sites, the choice of products is also different. Choosing a correct semi tipper trailer model will also improve work efficiency. Below we will provide you with different dump truck models:

What is a tipper semi-trailer?

Tipper trailer can be used in many other fields such as construction, agriculture, etc. They have different shapes and types, which are divided into side tipper trailer and rear tipping trailer.

Semi tipper trailer:

Dump trailers will help you move and unload bulk cargo in a very simple and effective way. Especially when dealing with large jobs. Through carefully designed unloading mechanism, operation safety can be well maintained.

Rear dump trailers are also called rear dump trailers. They are usually used to carry building materials such as sand, stones, ore, and scrap iron.

Lifting principle: The tractor gearbox uses an external power take-off to pressurize the hydraulic oil pump. The hydraulic oil pump controls the hydraulic oil pressure to achieve the lifting or lowering of the hydraulic cylinder. Generally, it can be fully lifted in 30 seconds to achieve unloading.

It is important to note that the length of the dump truck cannot exceed 12m. Because the roadbed is not hard enough, the longer it is, the easier it is to overturn and cause the tipper semi trailer to be scrapped.

End semi tipper trailer for sale

side dump semi trailer

The side tipper is designed to fall sideways for a reason, and you may be forced to unload in areas where there is not enough space.

In this case, you can use side dump trailer to help save space. The load capacity of the side tilted dumper may be greater than that of the rear tractor tipper trailer.

End dump trailer: its body length can be 8 meters to 12 meters, according to customer needs.

Side tipper: suitable for large workplaces, its maximum carrying capacity can reach 80-100tons.

Dump truck

1. Mine place: According to your requirements, the engine can choose 290 ~ 420hp. Choosing a short wheelbase improves the strength of the frame and the passability of the vehicle. For the self-unloading system, you can choose mid-top or front-top.

2. Urban buildings: These trucks usually drive on urban roads with a travel distance of less than 200 km. 336hp or 380hp engine power is the best choice. Choose 6 × 4 or 8X4 tractor according to the load capacity.

3. For transportation distances over 200 kilometers, it is best to use 8X4 to load more goods.

Precautions:

In the process of connecting the tractor to the semi-trailer, attention should be paid to the connection between the tractor and the semi-trailer in all aspects, mainly in the connection between the traction seat and the traction pin and the connection of the electrical circuit.

Connection of saddle and traction pin

Before connecting, carefully check whether there is enough lubricating grease on the surface of the saddle plate of the tractor, and whether there are other foreign objects on the traction pin and traction skateboard of the semi-trailer, to ensure the cleaning of the traction skateboard.

1. Adjust the support legs so that the semi-trailer traction skateboard is compatible with the height of the traction saddle. Generally, the semi-trailer traction skateboard is 1-3 cm lower than the center of the upper plane of the traction saddle of the tractor. Otherwise, sometimes not only can not connect, but also damage the traction seat, traction pin and related parts.

2. Operate the locking mechanism of the traction base to open the locking block into a free state.

3. When the tractor is going backwards, the centerline of the tractor and the semi-trailer should be consistent, and carefully adjust until the tractor and semi-trailer are successfully towed.

4. Check whether the locking block of the traction seat has locked the traction pin and whether it is locked firmly.

5. Slightly advance the tractor and check whether the connection is good.

Welcome to click “Resource“, you can get more article about our trailers.

Click “Product“, you can find your favorite semi trailer.

Ubicación : Shandong Titan Vehicle Co., Ltd., 250000 Jinan,
Persona a contactar : Semi trailer TITAN, +8618615679754

Buen trato: comprar del vendedor

Visita nuestra guía para una transacción segura! En ningún caso Algomtl no se hace responsable de los anuncios. Sólo la responsabilidad del vendedor o del comprador en caso de litigio está involucrado.
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de
Semi Tipper Trailer buying guide: How to Choose the Right Specs

Buscar en la categoria : Vehiculos
Buscar en la categoria :
buying, right, semi, trailer, guide, tipper, choose
Túnez 7000 Artesania
Espace Marie Anis et Wissal

Martes 23 abril 2024

Cantidad : min 1 piec - Precio : 800 euro

surtidor de los vestidos de novia y vestidos de noche caftán y muchos otros artículos. usted puede visitar nuestra creación portail en facebook https://www.facebook.com/AnisetWissal http://www.facebook.com/Kais.Challouah http://www.espacemariechallouahkais.com/ http://www.exportersindia...

espace challouah kais

  • challouah
  • 7000 - BIZERTE / TUNISIE
  • +21 6 21 63 23 68
Centrale négative COPELAND 30 CV + condenseur + tableau electrique + bouteille de recup...

Domingo 21 abril 2024

MATÉRIEL PRO OCCASION / MPO47 AVENUE DE LA GARE 47230 VIANNE Rcs. : 499 266 989 TEL 07 70 77 78 89 TEL 07 82 59 09 83 Mail : materielprooccasion47@gmail.com BLOG http://mpo-47.skyrock.com/ LIVRAISON POSSIBLE EN SUS* MATERIEL DISPONIBLE DEPT. 32 (GERS) AUTRES PHOTOS SUR NOTRE...

Materiel pro occasion

  • 47230 - Vianne
  • +33 7 70 77 78 89
Francia 518057 Materias primeras
RTV- 2 Caucho de silicona para la fabricación de moldes

Lunes 31 marzo 2014

Cantidad : ≥200KG - Precio : 5.88 USD/KG~6.98 USD

RTV- 2 de caucho de silicona para la fabricación de moldes Modelo del producto: INNO SILICA ® IS -CR Dureza: 15 Shore A, 20 Shore A, 25 Shore A, 30 Shore A, 35 Shore A, 40 Shore A Aplicaciones: Se utiliza principalmente en la industria de fabricación de moldes con vertido o cepillado...

Shen Zhen Inno Silica Co.,Ltd