Informática

Signal Conditioner

Cantidad : 1 million   Precio : 200-2000 CNY/pc

Signal Conditioner

Universal signal conditioner is used in industrial process control systems. Isolated signal conditioner connects industrial field instruments and control systems to complete the function of signal matching and conversion. Through reliable isolation technology, the signal conditioning equipment resists various interference attacks and ensures the stability of the system and instruments in a complex electromagnetic environment. The isolated pt 100 signal conditioner of Chenzhu using special design achieves anti-interference among power supply, input, and output. At the same time, the signal conditioning isolation module/unit has a strong EMC performance that can work normally even under strong interference.

So far, our signal conditioning amplifier for electronics, as a member of the whole safety automation system, has been applied to tens of thousands of industrial sites. And the stability of the control system escort, possessing the most complete models, has reached the international level. As one of the most professional signal isolator suppliers, Chenzhu promises to provide you good transducer signal conditioning and services! Different types of signal conditioning system for circuits can be offered by us, whether it's based on RTD loop powered digital isolator or DC Pt100 signal splitter with 4-20mA output current. If you want to know the price of our 5v to 24v PLC signal converter, please contact us as soon as possible. Related sensors and signal conditioning pdf files are also available for you to refer to.

Signal Conditioner Types

CZ2000 Series Signal Conditioner

CZ2000 Analogue Signal Conditioner

CZ2000 Analogue Signal Conditioner Loop Power

CZ2000 Temperature Converter Signal Conditioner

CZ2000 Voltage/Current Input Signal Conditioner

CZ3000 Series Signal Conditioner

CZ3000 Analogue Signal Conditioner

CZ3000 Analogue Signal Conditioner Loop Power

CZ3000 Temperature Converter Signal Conditioner

CZ3000 Pulse Input Signal Conditioner

CZ3000 Frequency Converter Signal Conditioner

CZ3500 Series Bus powered Signal Conditioner

What is the difference between 2-wire transmitter, 3-wire transmitter and 4-wire transmitter?

2-wire transmitter

2-wire transmitters are the simplest and most economical way to used them in the industrial field. The zero-end current is 4mA, which is sufficient to drive the transmitter's internal circuitry, while the current at 4-20mA represents the range of process transmissions measured.

3-wire transmitter

Some transmitter require more power than the signal loop can supply their internal circuity. The three-wire current output can share a ground wire with the power supply, saving a wire.

4-wire transmitter

Four-wire transmitters have their own internal power supply, and they do not need to be connected to a DC power supply. It has two power cords and two current output lines. The output of a 4-wire transmitter is usually a current signal.

FAQ of Signal Isolators

Q

How to distinguish between the active and passive signals?

A

According to whether the signal acquisition loop needs an external power supply,

Active signalIn the 4~20mA signal acquisition loop, the signal generating end has its own voltage drive and no external power supply equipment is needed. This 4~20mA is an active signal. Generally, 4-wire transmitter and 3-wire transmitter output active signals.

Passive signalIn the 4~20mA signal acquisition loop, the signal generating end does not have its own voltage drive and external power supply equipment is needed. This 4~20mA is a passive signal. Generally, a 2 wire temperature transmitter outputs passive signals.

Method of judging whether the external power supply is needed in the signal acquisition loop

Disconnect the signal acquisition loop, and connect a voltmeter to the two lines of the field device (voltage transmitter). If there is voltage, it means the field device outputs active signals. If there is no voltage, it means the field device outputs passive signals.

Temperature Input Signal Type and Range

Range

Min. Span

Accuracy

Type

TC

T

-200℃~+400℃

50℃

0.5℃/0.1%

E

-200℃~+900℃

50℃

0.5℃/0.1%

J

-200℃~+1200℃

50℃

0.5℃/0.1%

K

-200℃~+1372℃

50℃

0.5℃/0.1%

N

-200℃~+1300℃

50℃

0.5℃/0.1%

R

-40℃~+1768℃

500℃

1.5℃/0.1%

S

-40℃~+1768℃

500℃

1.5℃/0.1%

B

+320℃~+1820℃

500℃

1.5℃/0.1%

RTD

Pt100

-200℃~+850℃

20℃

0.2℃/0.1%

Cu50

-50℃~+150℃

20℃

0.2℃/0.1%

Cu100

-50℃~+150℃

20℃

0.2℃/0.1%

mV

-100mV~+100mV

10mV

20μV/0.1%

Potentiometer

0~5kΩ

0.10%

0~10kΩ

0.10%

Note of the data of loop powered isolators:

1. The“%” of conversion accuracy is relative to its range. Take the larger value between the range error and the absolute error when applying.

2. Allow a maximum wire resistance of 50Ω/line for RTD input(3-wire).

3. When the thermocouple is input, the conversion accuracy does not include the CJC. For every 100Ω increase in the compensation wire, the cold junction error increases by 0.2°C.

4. When the Type B thermocouple is input, the lower limit of temperature range is required to be greater than 680 °C to ensure the accuracy index.

5. mV signal input needs to be customized.

CHENZHU manufactures the most reliable interface product for safety automation system. We are here to help your device run more safely. Here you can not only get world-class products, but also outstanding service for safety and automation system.

Ubicación : 8F, Bldg.6, No. 201, Minyi Road, Songjiang Dis, Shanghai, China, 201612 Shanghai,
Persona a contactar : Danping Li, 021 6451 3350

Buen trato: comprar del vendedor

Visita nuestra guía para una transacción segura! En ningún caso Algomtl no se hace responsable de los anuncios. Sólo la responsabilidad del vendedor o del comprador en caso de litigio está involucrado.
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de
Signal Conditioner

Buscar en la categoria : Informática
Buscar en la categoria :
signal, conditioner
Vietnam 700000 Muebles
Imitation Rattan chair - QP 254

Viernes 13 diciembre 2024

Cantidad : 720

PLASTIC IMITATION RATTAN CHAIR Aluminium chair with rattan strings. Solid and stable frame in imitation of bamboo (aluminum tube with wall thickness 2 mm) and rattan seat (artificial rattan headed inside hardened steel wire). Model: Rattan. Material: PP. Usage: Interior/out door...

Qui Phuc Company Limited

  • Luck06
  • 700000 - Ho Chi Minh
  • +84 9 86 58 28 62
Hong Kong 999077 Varios / Descuento
Foto no disponible

Jueves 07 noviembre 2013

Cantidad : 1PCS - Precio : US$0.1

- Worldwide most advanced interconnect technology–Twist pin connector - To meet the requirement of miniaturization and lightweight connectors and cables in aerospace and aviation area, Sunkye Connector Research Center has committed to research of reliable and Micro Nano Connectors...

Sunkye International Co.,Ltd

Hong Kong 999077 Bienes de equipo
RFOU cable

Sábado 12 diciembre 2015

Cantidad : more than

Marine Cable P5 or P5/P12 BFOU 0.6/1KV Applications : - These cables are fire resistant, flame retardant, low smoke,halogen free and mud resistant, used for control, power and lighting systems. - Construction : - Conductors : Tinned annealed stranded compacted copper to IEC...

caledonian cables limited

  • 999077 - hongkong
  • +85 2 21 16 10 40
  • 852 21161040