Signal SPD
Signal surge protective device (Signal SPD) is actually a signal lightning arrester, which is installed in series in the signal transmission line, usually at the front end of the equipment, to protect the subsequent equipment-all kinds of signal lines and equipment, and prevent lightning waves from influencing the signal line and damaging the equipment.
Its main functions are:
1.Limit the transient overvoltage caused by the induced lightning in the signal line. According to surveys, more than 80% of lightning strikes in electronic systems are caused by induced lightning. Therefore, the wide application of microelectronic equipment in modern society should strengthen the lightning protection of electronic systems and install suitable signal surge protectors.
2.Limit the surge caused by the start and stop of the electronic system. In addition to the lightning induction caused by the surge in the signal line, the most important reason is the start and stop of the electronic equipment. This kind of surge is widespread. The installation of a suitable signal surge protector on the line can effectively suppress the surge caused by the operation of the electronic system, and can effectively reduce the deterioration and failure of electronic sensitive components, and ensure the signal line The stability, prolong the service life of electronic equipment.
Signal surge protectors can be divided into network signal surge protectors, monitoring signal surge protectors, control signal surge protectors, video signal surge protectors, telephone signal surge protectors according to different types of protected lines, Explosion-proof signal surge protectors,s and many other types, each type has many models, parameters and different appearances.
SPD for Network / Data Line Surge Protector
Data line protector series are mainly used in TCP/IP communication networks to protect electrical and electronic equipment's signal line from the impact of lightning electromagnetic pulse, induced over-voltage, transient operation, and resonance overvoltage.
SPD for Audio Surge Protector
With a standard RJ11 interface, The audio signal lightning protection device is suitable for audio signal lightning protection of 1 to 4 pairs of dedicated communication lines and protection of trunk lines and internal lines of program-controlled exchanges.
SPD for Video Signal System
Come With BNC interface, video signal lightning protection device is suitable for monitoring systems and video-on-demand equivalents Axis communication equipment.
Industrial Control Line AI/AO Analog signal RS485 Protector
The control signal lightning protection device is designed to protect the control line system to protect the electrical and electronic equipment's signal line from the impact of the lightning electromagnetic pulse.
SPD for Ethernet Power System
The POE Ethernet series lightning protection device is a lightning protection device developed for POE network power supply equipment in accordance with the standard requirements of IEC61643-21, EN61643-11: 2012, YD5075-98, and IEEE802.3AT.
SPD for Serial Signal System
The serial port signal lightning protection device is designed for communication network line not to be spoiled by lightning over-voltage, induce a voltage, and static discharge.
2 in 1 SPD for CCTV
2 in 1 monitor lightning arrester (power and network/ power and video/ power and control), is designed for a digital camera to protect the camera power and data line/power line/video line from the impulse of lightning electromagnetic pulse, induced over-voltage, operating over-voltage.
3 in 1 SPD for CCTV
3 in 1 monitoring surge protector is designed to protect the analog monitoring equipment ( power, data, control, video) from the damage of lightning electromagnetic pulse, induced over-voltage, operating over-voltage.
Explosion-Proof Signal Lightning Surge Protector
Explosion-proof signal lightning protector is designed for protecting instruments of 2line, 3 lines, 4 lines, from the impact of lightning electromagnetic pulse, induced over-voltage, transient operation and resonance over-voltage, transient operation, and resonance overvoltage.
If you need any kinds of power supply surge protector, please contact us, as a professional surge protector factory, Techwin is willing to offer you high quality products.
Persona a contactar : win Tech, 0755 86215101
Buen trato: comprar del vendedor
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de Signal SPD Buscar en la categoria : B2B Servicios Buscar en la categoria : signal |
Viernes 09 septiembre 2016
Cantidad : 400 - Precio : 8,00 €
Déstokage 400 detectores de humo EI ELECTRONICS EI650 fabricado en Europa con una batería de litio hasta autónoma en 2026 (20 estuches de 20 detectores con tornillos de montaje de pared y manual de instrucciones en francés). CARACTERÍSTICAS TÉCNICAS - Botón de prueba y descanso...
DOMERCA
- 69100 - VILLEURBANNE
- 06 25 41 37 41
Jueves 02 julio 2015
Cantidad : 100 - Precio : USD 535
Product Details: Place of Origin: Zhejiang, China (Mainland) Brand Name: Yom Model Number: CZ-6000S Output Power: 6000W Output Type: Single Phase Machine Size: 55*21.7*15.3cm Machine Weight: 14.25kg Efficiency: 90% Cooling Way: intelligent Cooling Fan Certificates: CE ...
Yueqing Yongmao Power Co.,Ltd
- 325600 - WENZHOU
- 8657762216128
Domingo 24 enero 2016
Steel Structure's Characteristics: Standard: GB50661 JGJ81 BS4592 ASM JIS ISO Size: depend on your drawing Material: Q235 Q345 Welded H Beam and Hot Rolled Section Steel Grade: Grade B Material: material: low carbon steel Roofing : single steel sheet ,RW,EPS, PU,XPS,PF Wall panel...
Hunan ADTO Industrial Group Co., Ltd
- adtosteel
- 413000 - Changsha
- +86 0731 85526339