Joyas / Accesorios

Silver Flex Membrane Switches

Niceone-tech is a professional (HMI)human machine interface control module manufacturer. Niceone-tech has always been people-oriented, and should constantly improve the working environment and living environment of employees, so as to enhance the centripetal force of employees to the enterprise so that employees can concentrate on their work. Because of this, although Nicone-tech is now only a 70-person factory, our staff is very united. Over the past five years, Niceone-tech has developed a variety of membrane switches, silicone rubber products, and the plastic that has been sold to different countries and has been well received by customers. All this is inseparable from the efforts of each of our personnel. We also provide membrane switch, membrane keypad, graphic overlay, silicone rubber keypad,etc.

The most common structure in custom Flex membrane switches is Silver Flex Membrane Switches. The conductive ink, carbon oil, and UV ink are printed on Polyester by screen printing, and the other layers are separated by adhesive. The LED can also be installed in the lower line to form a simple membrane switch with the shrapnel. The simplest structure is a single button membrane switch. The product is very thin, the cost is more affordable and easy to customize. Niceone-tech believes that the metal dome switch has a more obvious feel than the touch screen, and the membrane switch has better auditory, visual, and physiological effects for the touch screen.

What Are the Silver Flex Membrane Switch Design Options?

Digital and/or screen printed on the backside. The effect can be customized according to your requirements including glass, metal, wood, and stone. If the panel is in a more severe environment, we can even use hardened glass and stainless steel as the panel material. It is very important to choose Overlay printing according to requirements.

The window needs raw materials to be transparent, frosted, transparent or colored. The window of the membrane switch is different, and the choice of materials is also very different. When the window is large, and it is required to clearly see the bottom LCD or touch screen. EBG series is a good choice, the material is scratch resistant. If it is just a panel, then PC or Lexan overlay is also feasible

Selective textures and UV hard-coat surface finishes

Tactile or nontactile, snap dome, or nonsnap dome.

Pillow rim-embossed membrane switch panels

Optically clear adhesive (OCA), liquid optically clear adhesive, air gap

EMI/RFI shielding

Rigid support backers for membrane switch and panel such as aluminum and FR4 with PEM mounting fasteners

Standard connectors (material choices & specifications) such as cjt, cinematic and Molex, etc

Contact Niceone-tech now to learn more about the various constructions and product features we can offer, And learn how Nicole tech can customize your membrane switch to meet and exceed your unique application requirements. Visit our product gallery to learn more about the various constructions and product features we can offer, and learn how Niceone-tech can customize your membrane switch to meet and exceed your unique application requirements.

What areas can the silver membrane switch panel be used in?

Medical

Military

Industrial controls

Aerospace

Marine navigation

Lighting & Lighting Controls

CAN/BUS Controls

Food Equipment

Appliance

Automotive

Agricultural

Sporting Goods

Health & fitness equipment

Silver Flex Membrane Switches StructureSilver_Flex_Membrane_Switches.png

Overlay-Polyester is usually the first choice for membrane switch panel materials because its life will be a little longer than Polycarbonate. If it is simply a panel instead of a membrane switch, Lexan and Polyester are also good choices. The overlay is the most intuitive form of the human-machine interface. Niceone-tech will screen print or digital print on the back of the material, and they can also be used in combination. Special requirements such as the mirror silver effect are also feasible.

Overlay adhesive-As the first layer of adhesive paper under the panel, the Acrylic adhesive is usually used, generally, the thickness is between 0.125-0.225mm. If it is an LGF membrane switch (to LGF membrane switch) structure, the thickness sometimes reaches 0.64mm.

Top Circuit Layer (Dome retainer): This layer usually has three functions: 1. As the Dome Retainer, it ensures that the Snap dome of the circuit layer will not form shrapnel movement due to triggering and closing, resulting in circuit failure and circuit wear. 2. Use 0.1-0.125mm Polyester printing conductive ink, carbon oil, and UV ink as the upper line. This layer structure can also be convex to make tactile feedback better. 3. Can be used as an ESD shielding layer.

Circuit Spacer (switch spacer): Both upper and lower lines are printed with conductive ink, usually thicker tape is used to separate the upper and lower lines to avoid direct conduction of the membrane switch. If the upper circuit is only used as a fixed layer, then the general thickness of the Overlay adhesive + Top Circuit Layer + Lower Circuit Layer should be greater than 0.4mm, otherwise, the panel will squeeze the shrapnel to make them feel worse. Unless the panel is convex, the four-layer structure is less than 0.4mm.

Lower Circuit Layer: The thickness of this layer circuit is usually 0.1-0.188mm. It can be printed with ink, carbon oil, and UV ink. LEDs can also be installed. Some membrane switch panels will choose the copper flex or Printing circuit Board as the circuit. Compared with Polyester, their performance will be more stable. More often applied to the medical and military industries. If it is copper flex or Printing circuit Board as a line, Niceone-tech can even install a variety of components on the line.

Rear Adhesive: There are many choices, but the most commonly used are 3M200MP series or 3M300LSE. According to the different products of membrane switch lamination, Niceone-tech will recommend 3M300LSE if it needs higher viscosity.

Rigid Support Layer: This layer structure is generally used as the last layer of the membrane switch, which can make the structure of the membrane switch component more complete. Usually, the choice of materials is AL, FR4, PC, or steel. If AL is selected, nuts or feet may sometimes be added to the back of the product.

Ubicación : NO.61, Jianghai Road, HuangJiangTown, Dongguan, Guangdong, China, 523750 Jianghai Road,
Persona a contactar : tech niceone-, 86 769 82608010

Buen trato: comprar del vendedor

Visita nuestra guía para una transacción segura! En ningún caso Algomtl no se hace responsable de los anuncios. Sólo la responsabilidad del vendedor o del comprador en caso de litigio está involucrado.
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de
Silver Flex Membrane Switches

Buscar en la categoria : Joyas / Accesorios
Buscar en la categoria :
flex, switches, membrane, silver
Taiwán 334 Bienes de equipo
Hot Ink Roll Date Coding Machine PR-200

Viernes 22 marzo 2024

- Hot Ink Roll Date Coding Machine - - Model No.: PR-200 - Hot Ink Roll Date Coder PR-200 can be easily installed on all types of continuous motion packaging machines such as flow pack units, form-fill-seal packaging machine. It is for coding manufacturing dates, expiration date...

Autopack Co.,Ltd

Francia 83490 B2B Servicios
Foto no disponible

Lunes 22 diciembre 2008

Distribuez et posez un revêtement anti-glisse pour sols. Vos cibles sont nombreuses et diversifiées : Parents, Employeurs, Chefs d'entreprise, Chefs de chantiers, Municipalités.... Les lieux glissants ne manquant pas : commerces, hôpitaux, écoles, ponts de bateaux, abords de piscines...

AMENDOLIA

Hong Kong 518100 Audio / video
Paneles LED 1200x300mm 52W

Martes 31 diciembre 2013

Cantidad : 100 - Precio : $60

Características: 1 . Espesor de 10 mm , super delgado ; 2 . Tipo de instalación: Embedded / Suspendido 3 . Chorro de arena de plata brillante para 10mm serie thichness ; 4 . Importada placa de difusión Corea, transmitancia hasta 93% ; 5 . 0.2W 2835 LED, alta eficacia luminosa ...

Sinpco Optoelectronic Co.Ltd

  • 518100 - Shenzhen
  • 8613530366710