Bienes de equipo

SJ Series High Efficiency Single Screw Extruders

1.SJ Single screw extruder is fetured in high production capacity and high-velocity extrusion, and low-temperature plasticization design guarantees production warranty.

2. Two stages style unitary design of single screw extruder which reinforces plasticization capacity guarantees high performance and high velocity extruding.

3. BM type synthetic blending design, the particular kind of barrier, guarantees mixing effect.

4. Plastic single screw extruder has high twisting force output and the huge thrust bearing.

5. The gear and shaft of plastic single screw extruder is high-intensity alloy steel which are treated by the cementite and tooth grinding.

6. Other characteristics is like high hardness , clean degree and extremely low noise.

SJ Series High Efficiency Single Screw Extruder Specification

Model ltem

SJ-30B

SJ-45B

SJ-65B

SJ-90B

SJ-120B

SJ-150B

Length diameter patio

25-33

25-33

25-33

25-33

25-33

25-33

Main motor power

2.2-7.5

2.5-22

18.5-55

55-185

90-280

110-300

Heating power

5-8

6-12

12-18

16-40

20-60

30-80

Cooling mode

Fan water cooling

Max extruding capacity

18

60

180

450

650

950

Performance & Advantages of SJ Series High Efficiency Single Screw Extruder

PLC intelligence control of high efficiency single screw extruder achieves the linkage action of main machine and auxiliary.

Man-machine interface is easy to supervise the production process and the machinery condition.

Control mode (temperature control meter) may be replaced in the light of requirements.

Material character is 38 CRMoALIA through nitrogen treatment.

High efficiency single screw extruder has strict temperature control accuracy as well as wind cooling and water cooling unite.

Single screw extruder is equipped with the distinctive feeding inlet with consummate water-cooling unit design.

The barrel with channel surface feeding base suit has the function of increasing capacity, which ensures high efficiency and production capacity.

How does a Single Screw Extruder Work?

Here are five steps introducing the single screw extruder machine working principle:

Step 1: feed resin or pellets

The polymer, as a powder or granule, is continuously fed into the extruder barrel from the hopper.

Step 2: Resin melting

The heated barrel melts the polymer and transports the material through the mold.

Step 3: The actual extrusion process

The screw channel exerts force on the polymer through the rotating screw, while the stationary barrel exerts a destructive force on the rotating polymer and causes the polymer to slide slightly on the surface of the screw.

Step 4: Cooling

After passing through the mold, your plastic will pass through the cooling zone.

Step 5: Final finishing process

It involves finishing touches to your plastic. This includes drilling, printing, bending or cutting.

Use of Single Screw Extruder

1. Plastic pipe extrusion: suitable for PP-R , PE gas , PEX cross-linked , aluminum-plastic composite , ABS , PVC , HDPE silicon core and various co-extruded composite .

2. Sheet extrusion: suitable for the extrusion of PVC, PET, PS, PP, PC and other profiles and sheets. Extrusion of various other plastics such as silk, rods, etc.

3. Profile extrusion: adjusting the speed of the extruder and changing the structure of the extrusion screw can be used to produce various plastic profiles such as PVC and polyolefin. Modified granulation: It is suitable for blending, modifying and enhancing granulation of various plastics.

Single Screw Extruder Process

The single screw extruder machine includes extrude, drive, heating system three parts. The extrude system make high polymer material melt average, achieve glassy to viscous state, under certain pressure, be extruded to head die, so this system is important to forming and output. It includes feeder device,barrel and screw. It is the vital part, the screw is the heart of single screw plastic extruder, the material is moved by the screw's rotary and get the pressure and partly heat.

The drive system usually includes motor, reducer and bearing. The main effect is to drive the screw, supply the screw extrude process with torque and rotary force. During the extrude process, it requires screw rotary speed stable and not changeable with the burden of screw which can guarantee the products' average quality. In different condition, the screw need to change speed so as to adapt the requirement of different material and shapes. During most extruder the speed of screw is changeable by adjusting motor speed, the drive system set excellent lubrication system and swift stop device.

Heating and cooling system of the extruder is made up heating and cooling system, it is the requirement of extrude process, the heating and cooling device can guarantee the high polymer material melt into forming process's needed temp, condition. The cooling device is installed the bottom of the barrel screw and feeder hopper. The barrel cooling can adopt water cooling and wind cooling ways. General extruder mostly adopt wind-cooling. The large extruder mostly adopt water-cooling or both of them ways. Screw cooling adopt center water cooling, the purpose is to increase material's convey speed, make the output stable and improve the products' quality. The cooling device at the bottom of the hopper is to intensify material's convey function which avoid pellets adhesive caused feeder mouth jam, so can effect feeder speed.

Kailite ,as a professional extrusion line manufacturer, Provides professional services to more than 40 countries and regions around the world has won the general praise of users.

As a plastic extruder screw factory and one of screw extruder suppliers, we provide pvc single screw extruder with high quality.

Ubicación : B-9, No.398 Jiaozhou West Road, Zhongyun Industrial Park, 266300 Jiaozhou,
Persona a contactar : machinery kailite, 0532 85213196

Buen trato: comprar del vendedor

Visita nuestra guía para una transacción segura! En ningún caso Algomtl no se hace responsable de los anuncios. Sólo la responsabilidad del vendedor o del comprador en caso de litigio está involucrado.
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de
SJ Series High Efficiency Single Screw Extruders

Buscar en la categoria : Bienes de equipo
Buscar en la categoria :
efficiency, screw, extruders, single, series, high
Marruecos Artesania
Foto no disponible

Jueves 01 septiembre 2011

Cantidad : 10 - Precio : 250$

Traditional Moroccan lamps, authentic high-quality arts.Handmade by talented master craftsmen.Floor leather lamp, wall lamp in different designs, shapes and colors, for homes and gardens; it is ideal for meditation, romance and parties or just for peaceful serenity and tranquility...

Taiwán 42859 Varios / Descuento
Foto no disponible

Viernes 11 enero 2008

Cantidad : 100 pcs

We are a manufacturer in auto spout, automatic faucet, automatic urinal flusher, automatic excrement flusher, sensor device and electronic kits for automatic sanitary facilities. With high quality, best service and most price for our long business intended customers.Ubicación : No...

Lung Tian Industrial Co., Ltd.

  • lungtian
  • 42859 - Taichung Country
  • 886 4 2567 7779
  • 886 910 598 500
Francia 33150 Búsqueda/compra
Foto no disponible

Jueves 24 noviembre 2011

Cantidad : 12500 A 25

Nous cherchons de façon urgeante du sucre en bateau flottant ( high sea sugar) pour deux clients au Ghana 1- ICPO+SOFT PROBE AUTHORIZATION 2- FCO 3- CONTRACT 4- SELLER ISSUES BL + SGS 5-BUYER ISSUES FINANCIAL INSTRUMENT 6- FULL DOCUMENTATION ISSUED TO BUYER'S BANK 7-PAYMENT AND EXCHANGE...

CEA

  • elvio
  • 33150 - Cenon
  • 06 60 74 58 57