The Selection and Installation of Anti-slip Stair Nosing

I'm sure we've all experienced slippery feet or even falls when going upstairs in the rain or snow, this is because the anti-slip stair bar is not installed on the stair. Today we will introduce the information about the selection of the anti slip stair nosing and stair nose installation.

anti slip nosing strip not only prevent us from slipping and falling up and down stairs, but also protect the stair treads! Stair anti-slip bar is generally higher than the stair table, generally 2 ~ 3cm is the best height. The actual height is based on the actual condition of the stairs.

In order to avoid the illusion when going up and down the stairs, the height of the anti-slip bars on each footpath on the stairs should also be consistent at the same length and height, if you must change, should be controlled within 2 to 3cm.

The length of the non slip stair tread inserts of tread is generally calculated as the distance between the two ends of the stair tread minus 3cm, to extend the meter. Stair anti-slip is pull through regularly, if the tread length is 1 meter, the anti-slip is also 1 meter, unless there are other obstructions on both sides of the tread.