Tungsten Metal Bar
Cantidad : 200 tons Precio : 25usd-100usd
Pure tungsten bar is made of 99.95% tungsten powder. Its physical properties are as follows: density 19.3g/cm3, melting point (liquid) 3422°C, conductivity 30% IACS Min, hardness 69HRA Min. The forging and annealing process results can be obtained by test. It possesses special properties such as low thermal expansion with good thermal conductivity, adequate resistance to electrical resistance, and high elastic modulus.
Specification of Tungsten Metal Bar
|
|
W |
Al |
Ca |
Fe |
Mg |
Ni |
C |
Si |
N |
|
W1 |
≥99.95% |
0.002 |
0.003 |
0.005 |
0.002 |
0.01 |
0.003 |
0.003 |
0.005 |
|
W2 |
≥99.92 |
0.004 |
0.003
|
0.005 |
0.002 |
0.01 |
0.005 |
0.003 |
0.008 |
Application of Tungsten Metal Bar
Tungsten rods possess special properties, such as low thermal expansion with good thermal conductivity, adequate resistance to electrical resistance, and high elastic modulus. Therefore, tungsten rods are widely used in various fields. Such as support line, lead line, printer needle, various electrodes and quartz furnace, filament, high speed tools, automotive automatic products, sputter target material.
Application of Tungsten Metal Bar
Production Process of Tungsten Metal Bar
Production Process of Tungsten Metal Bar
Mechanical processing: the tungsten products can be turned, milling, planing, grinding, forging,
Pressure processing: generally, the elongation of rotary forging is about 100% after billet opening, and it enters the ordinary rotary section. After continuing to deform 200%, it enters the drawing.
Production: Generally using powder metallurgy method of production, powder - pressing molding - sintering.
Features of Tungsten Metal Bar
01.
It's anticorrosive properties are very good, and most inorganic acids have little erosion on it. In air it forms a protective layer of oxide on its surface, but at high temperatures it is completely oxidized. A small amount of tungsten can greatly increase the hardness of steel.
02.
It has a very high melting point, the highest of all non-alloy metals. Pure tungsten is mainly used in electrical and electronic equipment, and many of its compounds and alloys are also used in many other applications (most commonly in light bulb filaments, in X-ray tubes, and in superalloys).
There are many refractory metal suppliers, but we are one of the best choices for you.
Persona a contactar : Xie Carlos, 010 87659165
Buen trato: comprar del vendedor
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
|
Esta página es acerca de los importadores y exportadores de Tungsten Metal Bar Buscar en la categoria : Varios / Descuento Buscar en la categoria : metal, tungsten |
Saturday 30 July 2016
Precio : 3 200,00 €
A digitally controlled servomotor, curve smoothing function and 32-bit RISC CPU provide exacting high-speed cutting, with a maximum cutting speed of 33 in/sec. Three standard cutting modes - normal, heavy and high - provide optimum versatility. For utmost agility and precision, the...
Top Printhead
- topprint
- 10220 - Jakarta Pusat
- 622149022001
Tuesday 09 December 2025
Descubre todos nuestros productos de alta tecnología y accesorios para teléfonos inteligentes en nuestra sala de exposición se encuentra en Aubervilliers o directamente en nuestra tienda en línea http://www.vipgros.com . Ofrecemos una amplia selección de artículos para la telefonía...
Monday 30 March 2009
Cantidad : 1800 kg - Precio : 75 EUR (Negotiable)
We are searching for the buyers/suppliers to sell oak extract delivered from Russia, produced from the Caucasian oak tree, aged not less than 80-120 years, grown up in high from 700-1200 m in mountains, in ecologically clean areas of North Caucasus. There is the certificate of conformity...
International Drink Producer Association
- tatjana_777
- - Klaipeda
- +37 0 68 68 27 07




