Bienes de equipo

Wire Stripping Machine

Wire Stripping Machine

Common failures and methods of wire stripping machine.


1. The length of front wire is different.
A. If the clearance is too large for the left transmission line, adjust the left clearance.
B. The straightener is pressed too tightly. Adjust the straightener adjustment knob.
C. The catheter is not aimed at the center of the knife, and it will adjust the catheter to the center of the blade.

2. The length of the back wire is different.
There is too much clearance for the right transmission line. Adjust the right clearance adjustment disc to the right clearance.

3. The total length is inconsistent with the actual setting parameters.
A. It is longer than the set length, which is due to the systematic error in the mechanical transmission, you need to reduce the value of "L" in the mode.
B. It is shorter than the set length. Because the gap and pressure adjustment between the two wheels of the left transmission line is not suitable, and the value of "L" should be increased in the mode.
C. The length is not consistent because of the failure of the straightener to send the line. It is necessary to adjust the pressure of the right transmission line to the suitable clearance, keep the straightener sent smoothly.

4. The front-end incision is inclined.
It is due to the improper positioning of the catheter. Align the tube with the center of the knife edge.

5. The line head is stripped out of normal while the line end is normal. Some of the incisions are inclined, some of the line cores are cut.
Because the position of the tube is too close to the blade. Adjust the position of the tube, so that the distance between the front end of the tube and the blade is greater than the distance from the line tail (A).

6. The front or the back is cut off in the same bundle line.
Because the edge of the blade is too blocked by too much wire skin and clean it with a brush.

7. The insulation skin is overlaid.
Because there is the excessive pressure on the left and right transmission line. Reduce the left and right pressure wheel.

8. Stripping or stripping in the middle, the length L is qualified, but the size of A.B does not meet the requirements of setting.
A. The wire quality is not qualified, the insulation layer is too loose to the core wire, and the qualified conductor can be replaced.
B. The insulation layer is too soft which is pushed to deformation in machining molting process. The prototype cannot be recovered by external. It is the processing method itself that has the inherent defect. Thus reduce the requirements on the accuracy of length.

Ubicación : 11th Floor, JingZuan Building, No 875,XIAOLIN ROAD,KUNSHAN CITY, 215316 Jiangsu,
Persona a contactar : Lee Salome, 0086 0512 57169166

Buen trato: comprar del vendedor

Visita nuestra guía para una transacción segura! En ningún caso Algomtl no se hace responsable de los anuncios. Sólo la responsabilidad del vendedor o del comprador en caso de litigio está involucrado.
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de
Wire Stripping Machine

Buscar en la categoria : Bienes de equipo
Buscar en la categoria :
stripping, machine, wire
Rumanía 437.080 Materias primeras
Pellets de madera Din plus (PREMIUM) / ENplus-A1 de pellets de madera lleno de 15kg

Jueves 17 diciembre 2015

Cantidad : 5000 tons - Precio : 90EUR

Somos fabricante directo y principal proveedor de 6mm pellets de madera estándar europeo, de 8 mm con un contenido de humedad: <</span>7% y el valor calorífico: <</span>4.7kWh / kg. ESPECIFICACIONES PARA pellets de madera: 1. Uso: Casa Calefacción 2. Hecho de...

ECO ENERG LEMN SA

  • 437.080 - Maramures
  • 262370937
España 28492 Construcción
Foto no disponible

Lunes 20 agosto 2012

Cantidad : une machin - Precio : 30000euros

Ubicación : Calle Prado Isidro 45 , 28492 Mataelpino Madrid, Persona a contactar : Allami Azizi cherifa, 639509955

autonomo

  • 28492 - Mataelpino Madrid
  • 639509955
Rumanía 437.080 Materias primeras
100% pellets de madera de alta calidad DIN Plus Certificación

Jueves 17 diciembre 2015

Cantidad : 5000 tons - Precio : 90EUR

Somos fabricante directo y principal proveedor de 6mm pellets de madera estándar europeo, de 8 mm con un contenido de humedad: <</span>7% y el valor calorífico: <</span>4.7kWh / kg. ESPECIFICACIONES PARA pellets de madera: 1. Uso: Casa Calefacción 2. Hecho de...

ECO ENERG LEMN SA

  • 437.080 - Maramures
  • 262370937