Z-Wave Water Sensor

Introduction

Water sensor is an intelligent security equipment that can transmit the Z-Wave network which has particular frequency. Different countries or areas, the radio frequency of Z-wave is different. In the Z-Wave network communications, water sensor can work with any Z-wave main controller. In the Z-Wave network communications, water sensor can send messages to the Z-wave main controller, and realize association with other devices through the Z-wave network. In the communication with the Z-wave main controller, the water sensor can send messages to the Z-wave main controller, but it can not receive messages from the Z-wave main controller. When the water sensor is triggered, the LED light keeps on and the Buzzer will make sound. The water sensor sends messages to the Z-wave main controller at the same time, the Z-wave main controller will display the current status of water sensor. Water sensor is battery powered, is small and can be installed easily.

Parameters

1. Model: COL-WD01Z, COL-WD02Z

2. Compatible with 300 series and 500 series

3. Battery specification: CR2(3.0V)x 1

4. Power Consumption: 0.13W

5. MAX current: 35mA

6. Battery life: 37 months (standby)

7. Radio Protocol: Z-wave

8. Wireless distance: 50m

9. Operation temper: 0-40℃

10. Storage temperature: 0-60℃

11. Product size(L*W*H): 68mm x 68mm x 34mm

Features

When alarm triggered, LED light flashes in the detection area.

Easily install with screws or sticker .

Detecting the location of the overflow timely and accurately , reduce the economic losses caused by the overflow of water

Compatible with any Z-Wave main controller.