CURED - 440 Anuncios

Martes 05 julio 2016

Properties: White or light gray powder (granule). The density is 1.29. Soluble in benzene, acetone, chloroform, CS2 partly soluble in , diethyl ether, CCI4 insoluble in water, gasoline and alkali with lower concentration. Meeting hot water becomes to dimethyl ammonium and CS2. Be...

Martes 05 julio 2016

Properties: White or light gray powder (granule). The density is 1.29. Soluble in benzene, acetone, chloroform, CS2 partly soluble in , diethyl ether, CCI4 insoluble in water, gasoline and alkali with lower concentration. Meeting hot water becomes to dimethyl ammonium and CS2. Be...

Martes 05 julio 2016

Properties: White or light gray powder (granule). The density is 1.29. Soluble in benzene, acetone, chloroform, CS2 partly soluble in , diethyl ether, CCI4 insoluble in water, gasoline and alkali with lower concentration. Meeting hot water becomes to dimethyl ammonium and CS2. Be...

Viernes 08 abril 2016

Resins Characters: •Light colored and transparent granule •Applied in tyre rubber compounding, which have an excellent compatibility with a wide variety of elastomers including natural rubber (NR), synthetic rubber, polyethylene, polypropylene, Styrene-Isoprene-Styrene (SIS), Styrene...

Jueves 31 marzo 2016

Cantidad : 200KG - Precio : 6.98USD

Mold making silicone rubber is generally named as two-part silicone rubber that vulcanizes at temperature. Part A is a flow-able liquid, part B is the catalyst. Applications of Mold making silicone rubber Mold making silicone rubber is mainly used in toys,gifts,decoration,plate engrave...

Miércoles 30 marzo 2016

Cantidad : 200KG - Precio : 10.98USD

Features and applications of Anti-yellow Electronic potting addition silicon rubber for encapsulating LED display It is a kind of low viscosity, Inherent flame resistance, two components addition cured potting silicone with heat-conducting. It cures with both on room temperature...

Domingo 20 marzo 2016

Cantidad : Minimum:20 - Precio : US $6.15 - 7.98 / Ki

Condensation Silicone Rubber Product Title Welcome come to inspecting our factory, we will pick you up when you are in Guangzhou City. 4% catalyst is offered for FREE of charge Silicone range: 10-60 shore A Features Of Hot Sell High Quality Liquid Silicone Rubber for Soap Mold Making 1 ...

Viernes 18 marzo 2016

Cantidad : 60t/Month - Precio : USD9.25 / kilogram

RTV-2 liquid silicone rubber for toys/ dolls/adult dolls: 1). RTV-2 liquid silicone rubber for toys/ dolls/ adult dolls are generally named as two-part addition silicone rubber that vulcanises at room temperature. 2). RTV-2 liquid silicone rubber for toys/ dolls/ adult dolls are...

Viernes 18 marzo 2016

Cantidad : 60t/Month - Precio : USD9.25 / kilogram

Performance of liquid life casting silicone rubber for toy making life casting silicone rubber for toy making,liquid silicone has good mechanical performance, chemical stability with features of waterproof, corrupt resistance, physiological inert, non-toxic, tastelessness, aging-resistance...

Martes 15 marzo 2016

Cantidad : 200kg - Precio : 5.15usd/kg

Mold making silicone rubber is generally named as two-part silicone rubber that vulcanizes at temperature. Part A is a flow-able liquid, part B is the catalyst. Applications of RTV-2 mold making silicone rubber for stone products: Mold making silicone rubber for stone products is...

Jueves 10 marzo 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Jueves 10 marzo 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Jueves 10 marzo 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Lunes 07 marzo 2016

Cantidad : 60T/MONTH - Precio : 9.4USD/KG FOB HUANGP

1.description Life casting silicone is great to make for artificial limb products such as duplicating for artificial limbs, hands, fingers, feet, other human organs, dolls, toys, body double products such as reproducing an full body from head to toe, or a torso from face to mid-section...

Lunes 07 marzo 2016

Cantidad : 60T/MONTH - Precio : 8.2 USD/KG FOB HUANG

1.description Platinum Cure Molding Silicone is a two parts kinds liquid silicone, which can cured on room temperature. which mainly used for mold making of concrete, stone , jewelry casting,, tire molding ,rapid protyping , vacuum foaming, any condensation silicone can used for...

Martes 01 marzo 2016

Cantidad : 1 - Precio : 1,00 €

Weibao Board is a reliable substrate to receive heavy decorative finishes, such as marble or stone tiles. The board is manufactured to ISO 9001 quality management system and ISO14001 environmental management system, and has obtained the Green Product Label Award issued by National...

Martes 01 marzo 2016

Cantidad : 1 - Precio : 1,00 €

WeatherPlank is made of WeatherPro-L fibre cement reinforced calcium silicate board, which is produced from a mixture of cement, silica, special cellulose fibres and selected fillers to impart durability, toughness and moisture resistance. It is then cured by an autoclaving process...

Martes 01 marzo 2016

Cantidad : 1 - Precio : 1,00 €

Fireproof Board is off-white in color and has a smooth sanded surface on one side and a slightly textured reverse. It consists of fire rated minerals and calcium silicate matrix reinforced with selected fibers and special fillers. The board is then cured under an autoclave process...

Domingo 28 febrero 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Sábado 27 febrero 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Sábado 27 febrero 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Sábado 27 febrero 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Miércoles 24 febrero 2016

Before the curing Appearance White paste Relative density 1.60～1.70(g/cm3) Surface drying time ≤15(min) After the curing Tensile strength ≥1.5（MPa） Elongation At Break ≥150(%) Shear strength ≥2.0(MPa) Hardness 35～45(Shore A) Temperature Range -60～200(℃) Volume resistivity 2...

Miércoles 24 febrero 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Miércoles 24 febrero 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Miércoles 17 febrero 2016

Cantidad : 2000MT - Precio : $3500/MT CIF

2016 (New Crop New Harvest) Color: Brown Odor: Characteristic Quality: Handpicked clean Size: Homogenous CG3 Volatile oil: 20%-25% Foreign matter: 0% Moisture: 13% - 15% Baby Cloves: 2% Max. Origin: Madagascar Packing: 50 Kg Bag New Jute Bags Minimum Quantity: 1 X 20 FCL...

Domingo 01 noviembre 2015

Cantidad : 1000000kg - Precio : 1usd/kg

ZM-2 Aminosulfonic Superplasticizer This product, formed by sulfamic acid through chemical combination, has efficient water reducing, super plasticizing, strengthening effects and good adaptability on and to cement without toxicity and is crystal-free under low temperature. It...

Jueves 13 agosto 2015

Cantidad : 8000kg - Precio : 16usd/kg

1. Excellent tear & tensil strength 2. No shrinkage 3. Food grade and enviromental silicone 4. High quality but low price RTV Addition cure silicon rubber for artificial stone products applications: It mainly use for making molds for resin, stone, gypsum and cement product...

Jueves 13 agosto 2015

Cantidad : 8000kg - Precio : 8usd/kg

1. Product Feature of Electronic Potting Silicone Rubber HY-9055 silicone rubber is a kind of low viscosity, Inherent flame resistance, two components additi on cured potting silicone with heat-conducting. It cures with both on room temperature and heated te mperature. It has the...

Jueves 13 agosto 2015

Cantidad : 8000kg - Precio : 8.5usd/kg

Specification - Durable,High tear strength for replication,Low shrinkage,High simulation,Cover fine details mold making silicone rubber application mold making silicone rubber is primarily intended for mold making of gypsum, concrete, poly resin ,P U resin, unsaturated resin crafts...