MODIFIED - 864 Anuncios

Jueves 01 junio 2023

The truck uses compressed air to disengage and recombine the amt clutch actuator to complete the start and shift gears. A concentric pneumatic clutch actuator contains all elements connected to the gearbox system to disengage and reengage the clutch as required by the gearbox. The...

Miércoles 31 mayo 2023

Cantidad : 1000t/m

PA66 is nylon 66, namely polyamide 66. GF is glass fiber. Generally expressed as pa6 6gf35, that is, 35% glass fiber is added to nylon 66. Typical Application of pa 66 gf 35 (A2000G) It is applied to lamp holder cover and cooling fan, gears and various electronic connectors, wear-resistant...

Miércoles 31 mayo 2023

Cantidad : 1000t/m

Polyamide 66, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. Typical Application of pa6 6 gf30 Heat Stabilized (A2006F) The material pa66 30 gf thermal stability typically works for automobile engines, motor accessories such as engine covers, cooling fans...

Miércoles 31 mayo 2023

Cantidad : 1000t/m

Nylon 66, filled with 20% of glass fiber and flame resistance halogens, are extruded by Coperion twin-screw extruder is PA66 GF20 halogenated FR Typical Application of PA GF20 Halogenated FR (A2014D) (A2015D) PA66 20% glass fiber and halogenated flame resistance mixed modified grades...

Miércoles 31 mayo 2023

Cantidad : 1000t/m

PA66GF15 is a 15% glass fiber reinforced, toughened, polyamide 66 resin for injection molding. Typical Application of PA66 GF15 With High Tensile Strength (A2307C) PA66 15% glass fiber and high toughness modified grades are applied to the sectors of electrical switch with high tensile...

Martes 30 mayo 2023

Except traditional connector assembly like LC, SC, MU, FC, ST, E2000, etc., we keep in cooperation with top suppliers for new connector assembly technology enhancement, for example, CS, SN, MDC connector for new applications. Standard Fiber Optic Cable Patch Cord Fiber Patch Cord...

Martes 30 mayo 2023

Cantidad : 30-40sets/ - Precio : USD3000-200000

Automotive Water Inlet Manifold Mould Injecting gas through the nozzle is a typical method used in rod-shaped products, because this method does not require frequent changes to the mold and is versatile, but the disadvantage is that the nozzle needs to be modified and the single-use cost is high...

Jueves 25 mayo 2023

ASTM A795 fire control galvanized pipe Fire fighting pipe is a kind of normal carbon steel pipe for conveying water, gas and other fire suppression agents. It's usually in red. But the exterior of the light-wall is galvanized silvery. The installation of a red steel pipe is only to...

Jueves 18 mayo 2023

The section of dewatering and drying has come to final steps of cassava processing, the vacuum dehydrator can remove as much moisture as possible and the flash dryer can dry the wet starch to the low moisture content of no more than 13% to achieve the starch storage standard. The...

Miércoles 17 mayo 2023

Industrial moulding parts are referred to the plastic parts of industrial precision molded products, we preferred to think of it as non-consumer products. Nowadays, the demand for consumer products is oversupplied, and the demand for industrial products is increasing. This is because...

Viernes 12 mayo 2023

Henan Lichen is a China aluminum company that specializes in producing color-coated aluminum coil for exterior and Interior applications. Color coated aluminum coil is a salt with excellent acid-resistant material. As you can see below, Lichen provides you with two types of color...

Jueves 11 mayo 2023

The 20 reefer container insulation is used for delivery of temperature controlled cargoes. 20 RF containers (also referred to as 20-rf container) have factory-installed refrigeration units that provide the coldest temperatures and lowest humidity of all available shipping container options...

Jueves 11 mayo 2023

The 20 dry van container is a highly flexible solution for the shipping container transportation of regular dry goods. 20ft dry container can hold high-density products such as metal or dried grains and remain within weight limits. Our 20ft dry container have about the same capacity...

Jueves 11 mayo 2023

C-car Town Kids Driving School allows kids to drive like adults! In the C-car town kids driving school, children need to learn the traffic rules and get a child's license before they can drive the specially modified children's cars in the specified field. Young drivers can experience...

Miércoles 10 mayo 2023

Fully support the cable pass UL 758/1581，80℃/105℃heat resistance test (113℃/136℃, 168Hrs) "Defender-TTM TPU series (1090T series) is halogen-free flame retardant polyether TPU material that ATP developed for cable jacket, with excellent weather resistance, flame retardancy, mechanical properties...

Domingo 07 mayo 2023

Biodegradable Clear Cups Description Although our biodegradable clear cups are no different from ordinary plastics, and they are light and strong, they will be completely degraded into water, carbon dioxide, and organic substances during composting. Compared with petroleum-based plastic...

Sábado 06 mayo 2023

Cantidad : 30 cartons

In order to keep fresh fruit and vegatable, through the combined effect of modified atmosphere and humidity and condensation control to preserve freshness to effectively slows down the respiration of fresh produce, inhibits microbial decay and minimizes weight loss and shriveling...

Sábado 06 mayo 2023

Precio : 100USD

The material is obtained by grinding the coarse powder (D50 is 13 micron ~ 75 microns) . It can be used as moulding material, spraying material and composite modified pre-dispersion. Types of Grade PF PEEK Pure Resin Fine Powder ZYPEEK Supplier PF Series-770PF PEEK Pure Resin Fine...

Sábado 06 mayo 2023

Precio : 100USD

PEEK-GL series, is a glass fiber composite modified natural PEEK materials, currently available from 5% -35% of different mass fractions of reinforced materials. Compared with pure resin particles, it has better rigidity, better creep resistance and dimensional stability. Types of...

Sábado 06 mayo 2023

Precio : 100USD

PEEK-FC series modified by PTFE, graphite and carbon fiber have lower friction coefficient, wear resistance and self-lubrication than pure resin G. Types of Grade FC Super Wear Resistant PEEK ZYPEEK Supplier FC Series-330FC30 PEEK Super Wear Resistant FC Series-770FC30/770FE20/770FE20H...

Viernes 05 mayo 2023

What Are The Characteristics Of CNC Machine? Process concentration, automation, high flexibility, and strong capabilities are the characteristics of CNC machining. The process rules of prototype cnc machining and traditional machine tool machining are generally consistent, but there...

Viernes 28 abril 2023

Silicone fluids have unique properties because they are not products of petroleum or organic chemistry. They were the first, and are still the only, major class of polymers that are products of inorganic chemistry. Zhongtian Silicone Fluid Product Series Among the whole products series...

Viernes 28 abril 2023

Silane coupling agent, also known as silane treatment agent and primer, is a kind of low molecular organic silicon compound with special structure. The speciality of silane coupling agent lies in the two types of reactive groups with different chemical properties contained in it....

Viernes 28 abril 2023

Fine Mist Sprayers Wholesale In order to meet the needs of growth of pharmaceutical and perfume industry, industry of fine mist trigger sprayer has gradually been improved in molding, equipment, processing and quality controling after more than ten years, and has formed a large-scale production...

Jueves 27 abril 2023

Machining ABS material is an abbreviation for acrylonitrile-butadiene-styrene copolymer board, and is a type of polymer board that combines the excellent abrasion resistance, oil resistance, and impact resistance of PS, SAN, and BS boards. A new type of material in the fields of food...

Jueves 27 abril 2023

What are the classifications and load types of off-grid inverters? I. Classification of off-grid inverters Inverters can be divided into two main categories according to the waveform, one is a pure sine wave inverter and the other is a modified wave inverter. The rectified sine wave...

Miércoles 12 abril 2023

Cantidad : 1000t/m - Precio : 2-15 USD

PA 66 GF 15 is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding. PA66 GF15 Storage and Handling PRE-PROCESSING： Pre-drying: 4-6h / 130°C Processing: Melting temperature 280 - 300 °C Mold temperature 60 - 100 °C Product storage and handling...

Miércoles 12 abril 2023

Cantidad : 1000t/m - Precio : 2-15 USD

Anmei focuses on the production of modified engineering plastics. We have polyamide PA66 modified products with properties of heat-resistant, reinforced, toughened, flame-retardant, wear-resistant, weather-resistant, oil-resistant and conductive. According to the characteristics...

Miércoles 12 abril 2023

Cantidad : 1000t/m - Precio : 2-15 USD

Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending and modifying with the addition of a toughening agent. The flexural strength, abrasion resistance and creep resistance of Nylon 66 are very outstanding. What is the pa6 tensile strength of nylon...

Miércoles 12 abril 2023

Cantidad : 1000t/m - Precio : 2-15 USD

Nylon66 PA66 Heat Stabilized Description Heat stabilized nylon PA66 a high temperature nylon made by the polycondensation of terephthalic acid and hexamethylene diamine. Heat stabilized nylon 6 has the properties of low water absorption, excellent heat resistance, good processing fluidity...