C50 steel plate supplier

C50 steel is high-quality carbon structural steel under the standard EN 10083-2.

1. EN10083-2 C50 steel characteristics:

C50 is high strength medium carbon steel and it's cold deformation plasticity is low. Welding performance and hardenability is poor for C50 steel. But its no temper brittleness and cutting performance is well. C50 steel is usually used under the condition normalizing, quenching or tempering.

2. EN10083-2 C50 steel application:

C50 steel is used in the manufacture of mechanical product and spring requiring high wear resistance, dynamic load and the impact is not big, such as forging gear, tie rod, roller, shaft, friction plate, agricultural soil plough share, heavy load spindle and so on.

3. EN 10083-2 C50 steel equivalent materials:

GB 50, ГOCT 50, AISI 1050, BS 060A52, NF C50/XC48, DIN C50/CK50, JIS S50C, ISO683/1 (C50)/(C504)/(C50M2)

4. EN10083-2 C50 steel chemical composition %:

C: 0.47-0.55, Si(max): 0.40, Mn: 0.60-0.90, S(max): 0.045, P(max): 0.045, Cr(max): 0.40, Ni(max): 0.40, Mo(max): 0.10

5. EN10083-2 C50 steel mechanical properties:

Tensile strength σb (MPa)(min): 630(64)

Yield strength σs (MPa)(min): 375(38)

elongation δ5 (%)(min): 14

percentage reduction of area ψ (%)(min): 40

impact energy Akv (J)(min): 31

notched bar impact strength αkv (J/cm2)(min): 39(4)

hardness: unheated(max): 241HB; annealed steel(max): 207HB

Sample size: 25mm.

6. EN10083-2 C50 steel heat treatment specification and microstructure:

heat treatment: normalizing, 830℃; quenching, ,830℃; tempering, 600℃.

Microstructure: Pearlite + ferrite

7. EN10083-2 C50 steel delivery state:

With no heat treatment or heat treatment (annealing, normalizing and high temperature tempering) status of delivery. Heat treatment state delivery should be indicated in the contract, not specified, the delivery state is no heat treatment.

8.Payment : Usually 30% of the amount by T/T as deposit , and the balance money shall be paid by T/T after got the faxed B/L.Or L/C at sight .

Henan bebon international co.,ltd can supply C50 steel plate, C50 steel bar. We keep about 2000 tons for C50 steel in our warehouse in common size and we can cut it as your requirement. Any need for C50 steel, please contact with us.