METAL&PVC - 19255 Anuncios

Tuesday 09 August 2022

Cantidad : 200 tons/w

Anpeng Slotted Screen Mesh Anpeng woven wire mesh with slotted openings could be woven in any slot length and with any number of wires in clusters. This type of opening provides greater open area, in addition to higher production compare to regular square mesh. Designed to screen scalp flat...

Tuesday 09 August 2022

Sand casting china is the most commonly applied method for casting the metal part. It suits most of the raw materials, ferroalloy, and non-ferroalloy both can be used to do the sand casting. Types of sand casting is able to produce the part varying from several gram weight to dozens of tons...

Tuesday 09 August 2022

Resin sand casting is a kind of floor molding process, by mixing the resin with quartz sand and solidification agent, to create the very hard and solid mold. The resulted resin sand casting product will have smooth surfaces, accurate dimensions, and less sand residual and casting...

Tuesday 09 August 2022

The low pressure die casting is to let the melted metal flow into the casting mold under a certain degree of pressure, and solidify the casting part with the pressure as well. The pressure is powered by the inert gas or compressed air inside the sealed crucible, pressure push the...

Tuesday 09 August 2022

The lost-wax casting process can differ depending on the application and the requirement, but it generally consists the following steps: Molde-making, creating a mold, producing wax patterns, assembling the wax pattern, applying investment materials, burnout, pouring, decesting, finishing...

Tuesday 09 August 2022

Investment casting, also called the lost-wax casting process, is actually an ancient metal casting technology with a history of over 6,000 years. Investment casting mold generally refers to the mold made with meltable materials (such as wax, plastic, etc.) in very accurate dimensions...

Tuesday 09 August 2022

Sand casting means the main material consisting of the mold is sand, and the melted metal fills the casting cavity only by its gravity. Generally, this method of making the casting products is so-called sand casting. There are several different kinds of sand applying to industrial...

Tuesday 09 August 2022

Die Casting involves 3 key elements: the die casting machine, the mold, and the alloy materials, and the die casting could be described as the process of combining pressure, speed, and time to achieve an ideal cast metal part. The pressure applied during the casting process is a different...

Tuesday 09 August 2022

Casting process usually refers to the metal casting process, is one of heating processing technologies handled by humans can be found recorded as early as 6,000 years ago. This technology has been attained the prime in China during 1,700 ~ 1,000 B.C, producing the bronze ware mainly at that time...

Saturday 06 August 2022

Cantidad : 100,000pcs - Precio : US$0.20-US$100.00

Pet Furniture Covers Packaging & Bag *Material: clear PVC 0.15mm (PVC cold crack resistant minus 15 degree). Packaging & Bag *Material: clear PVC 0.15mm (PVC cold crack resistant minus 15 degree). *Structure: 3 panel structure. *Binding: clear PVC 0.15mm binding. *Printing: without...

Saturday 06 August 2022

Cantidad : 100,000pcs - Precio : US$0.20-US$100.00

Understanding that your health and security are the top priorities when it comes to purchasing our products, to offer high-quality products, we have earned the certifications from the third-party detection institution such as ISO9001 Certificate of Quality System, SGS Certificate...

Saturday 06 August 2022

Cantidad : 100,000pcs - Precio : US$0.20-US$100.00

Nail Salon Bag Wholesale Packaging & Bag *Material: Clear PVC (PVC cold crack resistant minus 15 degree). *Structure: 3 panels bag. *Binding: Black PEVA binding. *Zipper: Black nylon zipper #5 fixed on top, with 1pc black metal puller. Packaging & Bag *Material: Clear PVC...

Saturday 06 August 2022

Cantidad : Patch Pane - Precio : $0.20-$80

Cat.5e LAN Cable is a twisted pair cable for computer networks. The flat Cat.5e ethernet cable standard provides performance of up to 100 MHz and is suitable for most varieties of Ethernet over twisted pair up to 1000BASE-T (Gigabit Ethernet). As a cat 5e cable manufacturer, Copperled...

Saturday 06 August 2022

Cantidad : Patch Pane - Precio : $0.20-$80

In simple terms, cmd cable management is the tidying up and the organization of cords, cables, and other wires in any working situation. Proper management of data and power cabling within or around an IT environment will deliver a number of benefits that will enhance the system availability...

Saturday 06 August 2022

Cantidad : Patch Pane - Precio : $0.20-$80

Copperled's network cabinet is a combination of hardware structures designed to accommodate technical equipment including routers (routers), switches circuits (switches), hubs, storage devices (UPSs), cables, and, of course, servers. Standing Cabinet as a bracket that allows keeping...

Saturday 06 August 2022

What is PCB with Metal Dome Metal shrapnel (also known as pot or piece, metal dome, snap dome), made of ultra-thin (0.05mm-0.1mm thickness) and ultra-thick (usually high hardness) stainless steel 301 or 304 material. Metal dome is an important part of the dome switch PCB. They are...

Saturday 06 August 2022

Wall mounted digital Kanban display is the most classic digital Kanban style, with narrow frame, rounded corner and high-definition LCD display. With the help of digital Kanban software, it can confidently serve almost all industries and occasions. Dozens of outdoor electronic signage...

Saturday 06 August 2022

FPC membrane switch characteristics 1. Lower resistance, it's about 1ohm-50ohm 2. More flexible, standard for bending and high temperature 3. Pitch: 0.3mm, 0.5mm, 1mm, 1.25mm, 2mm,2.54mm 4. SMD: LED, Resistor, IC, connector, capacitors Welcome to the custom keypad manufacturer...

Saturday 06 August 2022

What is Cable Harness A cable and wiring looms and harnesses also referred to as a wire harness, wiring assembly, cable assembly or wiring loom, is an assembly of electrical cables or wires which transmit signals or electrical power. The cables are bonded together with a durable...

Saturday 06 August 2022

Our company develop this wood plastic extrusion line which is fully mixed with raw materials such as PVC, PP, PE and other plastics and plant fibres such as Wood flour, rice husk, straw, and then subjected to plastic processing techniques such as extrusion, moulding, and injection...

Saturday 06 August 2022

1. Gentle moulding design of SJSZ conical twin screw extruder china guarantees the quality of the matter. 2. Dependable and valid design theory guarantees the dependable operation of extruding. The special big torque drive system, gear tooth and shaft are high-intensity alloy steel...

Saturday 06 August 2022

1.SJ Single screw extruder is fetured in high production capacity and high-velocity extrusion, and low-temperature plasticization design guarantees production warranty. 2. Two stages style unitary design of single screw extruder which reinforces plasticization capacity guarantees...

Saturday 06 August 2022

PVC wood plastic composite wallboard is a kind of composite material which is sawdust, wood chips, such as low biomass fiber as the main raw materials, then mix plastics. It has the advantages of plant fiber and plastic but also solves the plastic, wood industry waste resources...

Saturday 06 August 2022

The structure and working principle of Three-layer synthetic resin The unit is composed of frame parts, traction and forming machine, automatic cutting machine, discharge shelf, electrical control box and others. Characteristics of Three-Laver Synthetic PVC Resin Tile Production Line...

Friday 05 August 2022

MIM is a repeatable process for complex components made from high-temperature alloys. MIM parts are near fully dense, which provides excellent mechanical, magnetic, corrosion, and hermetic sealing properties, and allows secondary operations like plating, heat treating, and machining...

Friday 05 August 2022

MIM stand for Metal Injection Molding, it's a forming method of a metal parts and can provide a nearly unlimited shape, geometric-feature capability, high-production rates through the use of multi-cavity tooling. Compared with conventional technology like press sintered and CNC...

Friday 05 August 2022

SMART Door Lock Structure Intelligent door lock is an improved lock which is different from the traditional mechanical lock and is more intelligent and simple in user safety, identification and management. Intelligent door lock is the executive part of door lock in access control system...

Friday 05 August 2022

MIM stand for Metal Injection Molding, it's a forming method of a metal parts and can provide a nearly unlimited shape, geometric-feature capability, high-production rates through the use of multi-cavity tooling. Compared with conventional technology like press sintered and CNC...

Friday 05 August 2022

Linear guider can be divided into three types: roller linear guideway, cylindrical linear guideway and ball linear guideway, which are used to support and guide moving parts to do reciprocating linear motion in a given direction. According to the nature of friction, linear motion...

Friday 05 August 2022

Rotating Cam MIM injection molding metal shaft can reduce the volume of the finished product and the production cost of the rotating camera. Rotating Cam Specifictions Product key words: Rotating Cam,camshaft rotation, Materials: 4605,Fe8Ni Requirements: polishing, sand pulling...