MOLD - 4542 Anuncios

Martes 18 abril 2023

2-Axis CNC Single Column Vertical Lathe X&Z is using a brand linear guideway. The main transmission of 2 axis cnc lathe is driven by frequency or a servo motor, simple structure, and high transmission efficiency. CNC Servo motor and gearbox directly drive the Ballscrew for X...

Martes 18 abril 2023

2-Axis CNC Double Column Vertical Lathe is compatible with automatic tool change system (ATC) and ATC as well as complex machining functions. Regarding the column heightening model, there is a double sliding column system. The cross beam of 2 axis lathe can move up and down to achieve...

Sábado 15 abril 2023

High precision electroplating equipment, use for high quality hard chrome electroplating, such as compression molds, casting molds, bearings, shafts, gauges, gears, etc. And decorative chrome, such as auto parts, bicycles, sewing machines, clocks, instruments, sanitary fittings, daily...

Jueves 13 abril 2023

The ZBG series America Housing Type Transformer are researched and developed by our company. Differencing from the traditional housing type transformer station, the high voltage load switch, fuse and other protection elements are installed in the pad mounted transformer and using...

Jueves 13 abril 2023

Cantidad : 30-40sets/ - Precio : USD3000-200000

Plastic Pipe Mold The gas-assisted controller is used to control the pressure of nitrogen to the mold at different times, the controller is divided into a single air circuit, double air circuit, and four air circuits, each gas path during gas assisted injection moulding can be individually...

Jueves 13 abril 2023

Cantidad : 30-40sets/ - Precio : USD3000-200000

8 Cavity Silicone Mold USM as a medical plastic injection moulding supplier provides products including medical device plastic parts, suction tips, blood collection devices, pregnancy test sticks, culture tubes, ventilator masks, etc. We can also offer kinds of shot glass mold silicone for sale...

Jueves 13 abril 2023

Cantidad : 30-40sets/ - Precio : USD3000-200000

4 Cavity Injection Mold The multi-cavity mold can save production time, for example, one mold can produce 1 piece of part in one minute, but it can be produced 32 pieces of parts in one minute if we make a 32-cavity mold. Multi cavity mold requires very high machining accuracy. If...

Jueves 13 abril 2023

Cantidad : 30-40sets/ - Precio : USD3000-200000

32 Cavity Mold In terms of multi-cavity molds, we pay attention to the design of layout and runner filling balance, which is also the key to the success of multi-cavity molds. Product material: ABS material in medical-grade Mold steel: S136 HRC 52-54 Mold life: 1 million Hot runner brand...

Jueves 13 abril 2023

Cantidad : 30-40sets/ - Precio : USD3000-200000

2K Molds The rotary mold is composed of two-cavity and core sides, the two core sides are the same, only the cavity sides is different which the second color cavity is bigger than the first color, at the beginning of injection molding, the barrel of the two-color injection molding...

Jueves 13 abril 2023

Cantidad : 30-40sets/ - Precio : USD3000-200000

This 16 cavity mold will use 4 pin-points hot nozzles for gating, and one nozzle will control 4 pieces of parts gating in order to achieve filling balance. Product material: PP material in medical-grade Mold steel: S136 HRC 52-54 Mold life: 1 million Hot runner brand: mold master Mold base...

Miércoles 12 abril 2023

Cantidad : 1000t/m - Precio : 2-15 USD

PA 66 GF 15 is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding. PA66 GF15 Storage and Handling PRE-PROCESSING： Pre-drying: 4-6h / 130°C Processing: Melting temperature 280 - 300 °C Mold temperature 60 - 100 °C Product storage and handling...

Miércoles 12 abril 2023

Cantidad : 5000pcs/da - Precio : usd0.1-5

Silicone ice mold is non-toxic and tasteless, silicone ice mold resistant to low temperature. Silicone ice mold has aging resistance, longer service life, and silicone mold is soft/flexible. Silicone products are not flammable and will not produce harmful substances During covid time or holiday...

Miércoles 12 abril 2023

Cantidad : 10000 - Precio : 1~10

Plastic Fiber Distribution Box is especially used to protect the connection of pigtails and optic cables in the network Why Choose WELINK Plastic Fiber Distribution Box WELINK has 8 years of experience in the design, production and assembly of optical fiber distribution boxes WELINK...

Miércoles 12 abril 2023

Cantidad : 50sets/mon - Precio : 80000~180000

TYD series servo electric cylinders can work in a harsh environment for a long time without failure, and achieve high-intensity, high-speed, and high-precision movement. With smooth movement and low noise, the unique anti-rotation function ensures the high-precision position control...

Miércoles 12 abril 2023

Cantidad : 50sets/mon - Precio : 80000~180000

TY502 is the equipment independently developed by Tianyu Machinery Equipment Co., Ltd. It can detect whether the interference between components is fully in line with the design to prevent the products with unqualified fit clearance from entering into the next process. CNC hydraulic...

Miércoles 12 abril 2023

HQ team has been providing copper based casting products for the customers nearly 20 years. Not only our stable quality but also the wonderful after-service allow us to be trusted by customers. We keep improving our technology and management that ready to serve more customers all over the world...

Martes 11 abril 2023

Precio : MSRP US$10K~US$450K

Stereolithography 3D Printer for Sale Printer 3d sla light source is a tiny pin dot of light. This pin dot reflects off of a rotating mirror and into the resin vat, drawing each layer as it goes. Because it must trace each part, laser printers are much slower for large jobs. RSPro...

Sábado 08 abril 2023

The low pressure casting machine is to let the melted metal flow into the casting mold under a certain degree of pressure, and solidify the casting part with the pressure as well. The pressure is powered by the inert gas or compressed air inside the sealed crucible, pressure push...

Sábado 08 abril 2023

Sand casting means the main material consisting of the mold is sand, and the melted metal fills the casting cavity only by its gravity. Generally, this method of making the casting products is so-called sand casting. There are several different kinds of sand applying to industrial...

Sábado 08 abril 2023

High precision die casting involves 3 key elements: the die casting machine, the mold, and the alloy materials, and the die casting could be described as the process of combining pressure, speed, and time to achieve an ideal cast metal part. The pressure applied during the casting...

Viernes 07 abril 2023

Cantidad : Quantities

Sibai has percentage orders of die casting, from Aluminium alloy and Zinc alloy (Zamak) material. The die casting can realize complex inner structure by the casting die, and can make large quantity. Die Casting Parts Features Die casting is a method, in which liquid or semi-liquid...

Viernes 07 abril 2023

Cantidad : Quantities

Sibai has made many plastic extrusion profiles. Like aluminium profiles, plastic profiles are also customized extruded profiles. Among the plastic, POM, PC and PVC are most common material for plastic profile. Sibai Customized Plastic Profile Material Features Sibai has made many...

Viernes 07 abril 2023

ISO molded graphite is widely used in aerospace, solar photovoltaic and semiconductor, graphite mould casting, cemented carbide and electronic mold sintering, electric spark, glass, medicine and other industries. HOW TO MAKE MOLDED GRAPHITE BLOCK  Molded graphite blocks in petroleum...

Martes 04 abril 2023

How to Make a Plastic Mold Prototype As one of the prototype & plastic mold makers whose goal is becoming an expert in the prototype mold making industry, HanKing Mould has experience in handling many different types of mould, including but not limited to prototype molds. Prototype...

Sábado 01 abril 2023

Precio : USD0.1-15

We are an unparalleled name in offering a wide gamut of wire cutting parts. These spare parts are amongst the most desirable and reliable products in the industry. The offered spare parts are manufactured using the best grade raw material under the supervision of highly skilled professionals...

Sábado 01 abril 2023

What is the family mold? A mold that can only produce one product at a time is called a single-cavity injection mold. If a mould is used to produce two or more plastic parts at a time, multi-cavity injection, if the parts are different, such a mold is called family mold. The plastic...

Sábado 01 abril 2023

Precio : USD0.1-15

A mould trial is a process by which a new mould is optimised in order to produce the desired products as efficiently as possible. This makes it one of the most important aspects of injection moulding. DETAIL OF TRIAL MOLDING Trial Molding Process Set barrel temperature according to...

Sábado 01 abril 2023

How to Make a Plastic Mold Prototype As one of the prototype & plastic mold makers whose goal is becoming an expert in the prototype mold making industry, HanKing Mould has experience in handling many different types of mould, including but not limited to prototype molds. Prototype...

Sábado 01 abril 2023

HanKing Mould serves global Automotive & Vehicle products customers, more than 10 years of experience enabling the HanKing team to provide customers the fast development time and stable quality to ensure the new project running well. HanKing engineer will analysis the filling...

Sábado 01 abril 2023

How to build a plastic precision mould? We have been manufacturing plastic precision moulds and components for more than ten years. With our expertise and experience, we provide valuable mold opening suggestions to our customers according to their specific needs, thus helping customers...