JIS SKS3 steel
OTAI SPECIAL STEEL is SKS3 steel stockholders and suppliers from china. more 16 years experience in JIS SKS3 tool steel round bar, flat bar and plate supply.
JIS SKS3 Steel is a high quality Cold work tool steel, It belong to the high quality high carbon alloy tool steel. Oil Quenched & Tempered Hardenss is 28-34 HRc. JIS SKS3 steel Annealing delivery hardenss less than 250HB.
Related Specifications ASTM A29/A29M DIN EN 10083/3 JIS G4404 GB/T 3077
Form of Supply
JIS SKS3 tool steel, we can supply the round bar, steel flat bar, plate, hexagonal steel bar and steel square block. JIS SKS3 steel Round bar can be sawn to your required lengths as one offs or multiple cut pieces. SKS3 steel Rectangular pieces can be sawn from flat bar or plate to your specific sizes. Ground tool steel bar can be supplied, providing a quality precision finished bar to tight tolerances.
Round
sheet
Square
Plate
Chemical composition of SKS3 steel
| C(％) | 0.90～1.00 | Si(％) | ≤0.35 | Mn(％) | 0.90～1.20 | P(％) | ≤0.030 |
| S(％) | ≤0.030 | Cr(％) | 0.50～1.00 | V (％) | — | W(％) | 0.50～1.00 |
SKS3 steel Heat treatment Related
- Annealing of SKS3 Tool steel
Slowly heated to 740-760 ℃（1364-1400℃） and allow enough times, let the steel to be thoroughly heated, Then cool slowly in the furnace. The SKS3 tool steel will get MAX 250 HB （Brinell hardness）.
- Hardening of SKS3 tool steel
SKS3 steels should be heated uniformly to 780-820°C (1436-1508°F) until completely heated through. If needed, the steels can be preheated at 300-500°C (572-932°F). About 30 min/per 25 mm of ruling section is to be provided and then the steels should be immediately quenched in oil.
- Tempering of SKS3 tool steel
Tempering of SKS3 steels is performed at 100-350°C (212-662°F), Soak well at the selected temperature and soak for at least one hour per 25mm of total thickness. Get Rockwell C hardness of 55 to 64.
Temperature [℃] 100 150 200 250 300 350
Hardness [HRc] 64-63 63-62 62-61 60-59 58-57 56-55
Mechanical Properties
The mechanical properties of SKS3 tool steels are outlined in the following table.
| Elastic modulus (@399°C/750°F, hardened to 62 HRC ) |
Elastic modulus (hardened to 62 HRC) | Yield (0.2%, hardened to 55 HRC) |
Yield (0.2%, hardened to 60 HRC) |
Yield (0.2%, hardened to 62 HRC) |
Yield (0.2%,hardened to 50 HRC) |
| GPa | GPa | Mpa | Mpa | Mpa | MPa |
| 172 | 193 | 1800 | 2150 | 2200 | 1350 |
SKS3 steel Applications
SKS3 steels are mainly used for short run tooling for cold forming dies, blanking dies, and cutting tools operating at ambient temper.
SKS3 tool steel typical applications include medium run dies, intricate press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. Also commonly used in applications such as cams, cloth cutting knives, cold taps, reamers, collets, cutting hobs, strip slitting cutters, trimmer dies, tube expander rolls, plastic moulds and woodworking knives ature.
Regular size and Tolerance
| 1) Hot Rolled round bar | |||
| Diameter (mm) |
Diameter Tolerance (mm) |
Diameter (mm) |
Diameter Tolerance (mm) |
| ≤12.70 | -0.13 ～0.30 | >50.80～63.5 | -0.25～0.76 |
| 12.7～25.40 | -0.13～0.41 | >63.50～76.20 | -0.25～1.02 |
| >25.4～38.10 | -0.15～0.51 | >76.20～101.60 | -0.30～+1.27 |
| >38.1～50.80 | -0.20～0.64 | >101.60～203.20 | -0.38～3.81 |
| 2) Hot Rolled steel plate | |||
| Thickness (mm) |
Thickness Tolerance (mm) |
Thickness (mm) |
Thickness Tolerance (mm) |
| ≤25.4 | -0.41～0.79 | >127～152 | -1.60～2.39 |
| >25.4～76 | -0.79～1.19 | >178～254 | -1.98～3.18 |
| >76～127 | -1.19～1.60 | >254～305 | -2.39～3.96 |
Others SKS3 have not specified size, pls contact our experienced sales team.
JIS SKS3 tool steel round bar and flat sections can be cut to your required sizes. SKS3 tool steel ground bar can also be supplied, providing a high quality tool steel precision ground tool steel bar to your required tolerances. JIS SKS3 steel is also available as Ground Flat Stock / Gauge Plate, in standard and nonstandard sizes.
Contact our experienced sales team to help you with your SKS3 tool steel questionsadn enquiry by Email or Telphone. The questions will be reply in 24 hours.
OTAI SPECIAL STEEL CO., LTD
Email: jack@otaisteel.com TEL: 0086-769-33232622 FAX: 0086-769-88705839
Persona a contactar : kamen chan, +8676923190193
Buen trato: comprar del vendedor
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
|
Esta página es acerca de los importadores y exportadores de JIS SKS3 steel Buscar en la categoria : Mayoristas / proveedores Buscar en la categoria : sks3, steel |
Objeto / decoraciónReportar abuso
Lunes 24 febrero 2014
Cantidad : 1 - Precio : 860,00 €
Setter en joyería y los amantes de los bellos motocicletas "Meilleur Ouvrier de France", y creador en el fondo, la realización de la gama alta de las lámparas de inspiración Harley Davidson y engastado con un diamante fuera obvio. Los invito a descubrir mi colección, compuesta exclusivamente...
philippe GOMEZ
- - meximieux
- 06 12 52 01 20
999077 Medio ambiente / EcologiaReportar abuso
Miércoles 22 abril 2015
Cantidad : 1piece - Precio : USD5~36
1 panel solar: 3W Ashiloy Industry co,ltd 2: 3.7V bateria de litio de alta calidad / 4400ma plena capacidad batería. 3.led: Power 3W, 38pcs. Epistar SMD 2835led, temperatura de color 5500-6000k, lumenes sobre 300lm.Brillo equivalente a 12 watts de brillotricolor Lampara de ahorro...
Ashiloy Industry Co.,Ltd
- 999077 - KLN
- +86 138235618632
655-0021 Objeto / decoraciónReportar abuso
Domingo 05 julio 2015
- Kakejiku es la llave para desenmarañar el misterio japonés. - El kakejiku (voluta de ejecución en la horca japonesa) es el arte de la pintura japonés tradicional. Desde la antigüedad, Japón se ha considerado uno de los países más misteriosos en el mundo. El kakejiku es un instrumento...
Japan
- 655-0021 - Kobe
- +081787096688
